• ZnO photoanode effect on the efficiency performance of organic based dye sensitized solar cell 

  Ili Salwani, Mohamad; S S, Ismail; ‪Mohd Natashah, Norizan; ‪Sohiful Anuar, Zainol Murad‬; Mohd Mustafa Al Bakri, Abdullah (IOP Publishing Ltd, 2017-06)

  Dye sensitized solar cell has been emerged as one of the most promising candidates for photovoltaics applications in good quality of their low manufacturing cost and impressive conversion energy. Titanium dioxide (TiO₂) ...

• Smart Rash Driver System via Internet of Things (IoT) 

  Kong, Sheau Tong; Mohd Natashah, Norizan; Ili Salwani, Mohamad (EDP Sciences, 2017)

  Nearly half a million accidents on Malaysians road occur in 2015. The aim of this research is to detect car speed, capture the photo of the speeding car and then transfer the data like car speed, date and time, location ...

• High performance systolic array core architecture design for DNA sequencer 

  Dayana, Saiful Nurdin; Mohd. Nazrin, Md. Isa; Rizalafande, Che Ismail; Muhammad Imran, Ahmad (EDP Sciences, 2018)

  This paper presents a high performance systolic array (SA) core architecture design for Deoxyribonucleic Acid (DNA) sequencer. The core implements the affine gap penalty score Smith-Waterman (SW) algorithm. This time-consuming ...

• Design and Analysis of XOR Logic Gate Based on Two-Photon Absorption 

  Nazir, N.S.; Wahid, M.H.A.; Hambali, N.A.M.A.; Shahimin, M.M.; Khairuddin, N.Z.; Hasanuddin, N.H.; Ramli, M. M. (EDP Sciences, 2016)

  Two-photon absorption with high intensity pump beam occurs in a SOA depends on fast phase change of a weak probe signal. This work analysed optical XOR logic function using two-photon absorption induced fast phase change. ...

• Sol-gel synthesis and characterization of Ba1-xGdxTiO3+δ thin films on SiO2/Si substrates using spin-coating technique 

  Teh, Yen Chin; Ala’eddin, A. Saif; Prabakaran, Poopalan (Kaunas University of Technology (Lithuania), 2017)

  Ba1-xGdxTiO3+δ, at x = 0, 0.05, 0.1, 0.15, 0.2, (BGT) thin films have been fabricated on SiO2/Si substrate using sol-gel method. The microstructure and surface morphology of the fabricated films have been investigated ...

• Error correction for foot clearance in real-time measurement 

  Yufridin, Wahab, Dr.; Norantanum, Abu Bakar; Mazlee, Mazalan (Institute of Physics Publishing, 2014)

  Mobility performance level, fall related injuries, unrevealed disease and aging stage can be detected through examination of gait pattern. The gait pattern is normally directly related to the lower limb performance condition ...

• Low power shoe integrated intelligent wireless gait measurement system 

  Yufridin, Wahab, Dr.; Mazlee, Mazalan; Norantanum, Abu Bakar; A F, Anuar; Mohammad Zaidi, Zainol; F, Hamzah (Institute of Physics Publishing, 2014)

  Gait analysis measurement is a method to assess and identify gait events and the measurements of dynamic, motion and pressure parameters involving the lowest part of the body. This significant analysis is widely used in ...

• Design and analysis of various microcantilever shapes for MEMS based sensing 

  Huzein Fahmi, Hawari; Yufridin, Wahab, Dr.; M. T., Azmi; Ali Yeon, Md Shakaff, Prof. Dr.; Uda, Hashim, Prof. Dr.; Shazlina, Johari, Dr. (Institute of Physics Publishing, 2014)

  One the major requirements for sensing devices is its sensitivity. This paper presents the design, analysis and simulation of various types of MEMS based microcantilevers shapes and their influence on sensing sensitivity. ...

• Bioreactor profile control by a nonlinear auto regressive moving average neuro and two degree of freedom PID controllers 

  Ubaid, Imtiaz; Jamuar, Sudhanshu Shekhar, Prof. Dr.; Sahu, Jaya Narayan; Ganesan, Poo Balan (Elsevier Ltd., 2014-11)

  This paper presents the use of nonlinear auto regressive moving average (NARMA) neuro controller for temperature control and two degree of freedom PID (2DOF-PID) for pH and dissolved oxygen (DO) of a biochemical reactor ...

• L-band multi-wavelength Brillouin-Raman fiber laser utilizing the reverse-S-shaped section 

  Nor Azura malini, Ahmad Hambali, Dr.; M. Ali, Toor; Zulfadzli, Yusoff, Assoc. Prof.; Muhammad, Ajiya (World Scientific Publishing Company., 2014-06)

  In this paper, we experimentally demonstrated multi-wavelength Brillouin-Raman fiber laser that operates in the L-band wavelength region. The laser structure utilizes the reverse-S-shaped technique. 35 output Brillouin ...

• LED heat dissipation analysis using composite based cylindrical slug 

  Zaliman, Sauli, Dr.; Vairavan, Rajendaran; Retnasamy, Vithyacharan (Trans Tech Publications Inc., 2014-02)

  The optical efficacy and reliability of light emitting diode is extensively influenced by the operating junction temperature of the LED. Therefore, the evaluation of junction temperature is significant. This paper reports ...

• Effects of heat slug shapes on the heat dissipation of high power LED 

  Zaliman, Sauli, Dr.; Vairavan, Rajendaran;; Retnasamy, Vithyacharan (Trans Tech Publications Inc., 2014-02)

  High power light emitting diodes are currently challenged by thermal issue of high heat generation which limits the reliability and efficiency. Each component in the LED package has a significant role in heat dissipation. ...

• Wettability and surface roughness study on RIE treated aluminium deposited surface 

  Retnasamy, Vithyacharan; Zaliman, Sauli, Dr.; Uda, Hashim, Prof. Dr.; Palianysamy, Moganraj; Aaron, Koay Terr Yeow; Ramzan, Mat Ayub (Trans Tech Publications, 2014-04)

  Design of Experiment (DOE) is a technique for optimizing process which has controllable inputs and measurable outputs. As a method of DOE, 24 Full Factorial design is used to study the effect of Reactive Ion Etch towards ...

• Low loss optimization of strip channel polysilicon waveguide fabrication 

  Mukhzeer, Mohamad Shahimin, Dr.; Ang, Keng Chuan; Khor, Kang Nan (American-Eurasian Network for Scientific Information, 2013)

  Research on waveguide structures, its behaviour and material properties are very extensive for a wide range of applications. Generally, waveguides are used for optical devices such as biosensors. This paper investigates ...

• Simulation of 1GHz center frequency SAW using CST software for biosensor application 

  Mohd Rosydi, Zakaria; Uda, Hashim, Prof. Dr.; M. H. I., Mohd Amin; Tijjani Adam, Shuwa; M. Wesam, Al-Mufti (IDOSI Publications, 2013)

  Surface Acoustic Wave (SAW) is a one of the essential components that used for sensor application to detect in various fields. The high center frequencywill improve the sensitivity of SAW biosensor. Therefore, it's very ...

• Heat dissipation analysis under natural convection condition on high power LED 

  Vairavan, Rajendaran; Zaliman, Sauli, Dr.; Retnasamy, Vithyacharan; Kamarudin, Hussin, Brig. Jen. Dato' Prof. Dr. (AENSI Publisher All rights reserved, 2013-10)

  As the technology downscales with superior power and increased package density, the thermal effects of the high power LED are significant. Thus, the operating junction temperature of the high power light emitting diodes ...

• High power LED heat dissipation analysis via copper diamond slug 

  Vairavan, Rajendaran; Zaliman, Sauli, Dr.; Retnasamy, Vithyacharan; Kamarudin, Hussin, Brig. Jen. Dato' Prof. Dr. (AENSI Publisher All rights reserved, 2013-10)

  The emergence of high power light emitting diode as a novel electronic based light source is due to its vast advantage in terms of optical efficacy, low power consumption and enhanced life time. However, the performances ...

• LED heat dissipation study using different Cu slug size 

  Vairavan, Rajendaran; Retnasamy, Vithyacharan; Zaliman, Sauli, Dr.; Kamarudin, Hussin, Brig. Jen. Dato' Prof. Dr. (AENSI Publisher All rights reserved, 2013-10)

  High power light emitting diodes (LEDs) have significant contribution in illumination industry due exceptional advantages in terms of low power consumption, superior reliability, prolonged life time and high efficiency. ...

• Nuclear matter and surface clustering 

  Qamar Nasir, Usmani, Prof. Dr.; Nooraihan, Abdullah; Khairul Anwar, Mohamad Khazali; Zaliman, Sauli, Dr. (IOP Publishing Ltd, 2013)

  We demonstrate that the binding energy per nucleon of symmetric nuclear matter (SNM) (with Coulomb interaction switched off and N Z) in the limit of zero density approaches to its value, uv, at the saturation density, where ...

• A brief review of layered rock salt cathode materials for lithium ion batteries 

  Tan, Tze Qing; Soo, Soon Peng; Azmi, Rahmat, Prof.; Shamsul Baharin,  Jamaludin, Prof. Dr.; Rozana Aina, Maulat Osman, Dr. ; Zul Azhar, Zahid Jamal, Dato Prof. Dr.; Mohd Sobri, Idris, Dr. (Trans Tech Publications, 2013)

  Nowadays, many researchers have been studying on the layered rock salt-type structure as cathode materials for the lithium ion batteries. LiCoO2 is the most commonly used cathode material but Co is costly and toxic. Thus, ...

View more