Browsing School of Environmental Engineering (FYP) by Title
Now showing items 117-136 of 437
-
Degradation characteristics of Monoazo and Diazo dye by ozone oxidation
(Universiti Malaysia Perlis (UniMAP)School of Environmental Engineering, 2016-06)The ozone oxidation was chosen to study the degradation characteristics of monoazo (AO7) and diazo (RG19) dyes. The studied was performed in a laboratory scale ozone reactor and conducted with different parameters such ... -
Degradation mechanism of Phenol by ozonation
(Universiti Malaysia Perlis (UniMAP)School of Environmental Engineering, 2015-06)Ozonation was chosen to study the degradation mechanism of phenol. The overall performances of phenol degradation were studied based on the removal of phenol, chemical oxygen demand (COD), total organic carbon (TOC), Fourier ... -
Degradation of remazol dyes-containing wastewater using integrated anaerobic-aerobic and aerobic Sequencing Batch Reactors (SBRs)
(Universiti Malaysia Perlis (UniMAP)School of Environmental Engineering, 2012-05)The aim of this study is to develop integrated anaerobic-aerobic and aerobic sequencing batch reactors (SBRs) for the treatment of remazol dyes-containing wastewater. This study also focuses to measure the ability of ... -
Design and development of low cost lightweight concrete composites with mixture of fly ash and concrete sludge aggregate
(Universiti Malaysia Perlis (UniMAP)School of Environmental Engineering, 2013-06)In this research, fly ash and concrete sludge aggregates (CSA) as partial replacement have introduced into lightweight foam concrete where these materials play an important role to enhance the properties of concrete. Fly ... -
Determination of adsorption mechanism of Cerbera Odollam as an adsorbent for the removal of heavy metals from industrial wastewater
(Universiti Malaysia Perlis (UniMAP)School of Environmental Engineering, 2012-05)Industrial waste constitutes the major source of various kinds of metal pollution in natural water. Adsorption is one of the alternatives for such cases as an effective purification and separation technique used in industry ... -
Determination of lag acceptance and effects for left turning movements at intersections
(Universiti Malaysia Perlis (UniMAP)School of Environmental Engineering, 2014-06)The congestion of traffic flow at intersection occurs at peak hour. The movement of the vehicles is slow during the critical time of peak hour which can gives effect of delay time for the other movement of the vehicles in ... -
Determination of structural and dimensional changes of rubber seals immersed in oil
(Universiti Malaysia Perlis (UniMAP)School of Environmental Engineering, 2010-04)The purpose of this work is to investigate the suitability use of vegetable-based oil in hydraulic system and the compatibility between the rubber seals and lubricant extracted from vegetable-based oil in hydraulic system. ... -
Develop a programme to predict seismic base shear force of type 2 elastic response spectra according to EUROCODE 8
(Universiti Malaysia Perlis (UniMAP)School of Environmental Engineering, 2013-06)Seismic force affecting structure by lateral motion, this gives impact especially to the base of high rise building. Hence, a calculator had been developed to predict shear base force in order to design anti-seismic ... -
Develop a programme to predict the seismic base shear force of type 1 elastic response spectra according to eurocode 8
(Universiti Malaysia Perlis (UniMAP)School of Environmental Engineering, 2013-06)The aim of this project is to develop a user friendly programme where seismic lateral force which also known as base shear force can be determine efficiently. The standards and conditions that used to obtain the base ... -
Developing an environmental monitoring system (EMS) and environmental monitoring plan (EMP) in the establishment of landfill post-closure procedure
(Universiti Malaysia Perlis (UniMAP)School of Environmental Engineering, 2012-05)The main objective of this study is to establish an effective general system for monitoring pollutants by taking into consideration the characteristic of the waste and the landfill critical structures. The other objective ... -
Development of cement board containing polymeric materials for building application
(Universiti Malaysia Perlis (UniMAP)School of Environmental Engineering, 2012-05)This research was mainly on the development of cement board containing polymeric materials for building application The application of cement board containing polymeric material has not been commercial yet. The important ... -
Development of cement composite reinforced with coconut fibre and expanded polystyrene beads
(Universiti Malaysia Perlis (UniMAP)School of Environmental Engineering, 2013-06)In this research, polystyrene and coconut fibre was introduced into the concrete to form fibre reinforced concrete, where the polystyrene plays an important role to reduce the weight of the concrete while the coconut ... -
Development of computer model for free water surface (FWS) design system in manmade wetland
(Universiti Malaysia Perlis (UniMAP)School of Environmental Engineering, 2015-06)Man-made wetland is a man-made system or engineered wetland that are designed, built and operated to imitate function of natural wetland. Usually, man-made wetland is used to provide tertiary treatment to municipal wastewater ... -
The development of ferro-cement sandwich panel for IBS
(Universiti Malaysia Perlis (UniMAP)School of Environmental Engineering, 2014-05)The development of ferrocement sandwich prefabricated structural element now day has grown in the construction industry were due to the specific characteristic needed, lightweight to ratio strength, saving material cost ... -
The development of lightweight concrete using modified expanded polystyrene beads
(Universiti Malaysia Perlis (UniMAP)School of Environmental Engineering, 2013-06)Lightweight concrete defined that is a type of concrete that is use lightweight aggregates and more lighter with low density than the conventional concrete. The main objectives of this research were to produce a good quality ... -
The development of lightweight expanded polystyrene concrete blocks
(Universiti Malaysia Perlis (UniMAP)School of Environmental Engineering, 2013-06)Nowadays, a new development of lightweight concrete has been introduced to use in construction. This is because lightweight concrete present an essential decrease in density if compared with normal concrete. The objective ... -
Development of load bearing block from lightweight foamed concrete
(Universiti Malaysia Perlis (UniMAP)School of Environmental Engineering, 2014-05)Development of lightweight concrete has been introduced to use in construction because lightweight concrete less density thus lighter than normal concrete. In this study, foam or bubbles resulting from the base oil used ... -
Development of Palm Oil Fuel Ash (POFA) based portland cement and evaluation of compatibility with superplasticizers
(Universiti Malaysia Perlis (UniMAP), 2015-06)In this era, concrete is one of the most important construction materials used throughout the world especially for the construction sector. This study examined the effects that occur in terms of workability and strength ... -
Disinfection by products (DBPs) in treated well water sources
(Universiti Malaysia Perlis (UniMAP), 2014-06)The study was about the formation of trihalomethanes (THMs) and haloacetic acids (HAAs) in drinking water. The raw water samples were collected from bore well in Felda Chuping, Semadong, Arau and Timah Tasoh, Perlis. The ... -
Disinfection by-products in chlorinated drinking water and their potential health effects on humans: An international perspectives
(Universiti Malaysia Perlis (UniMAP)School of Environmental Engineering, 2011-05)The use of chlorine as a disinfectant in drinking water has resulted to chemical compounds known as disinfection by-products (DBPs). The present of these compounds has become emerging issue due to its potential health ...