Browsing School of Environmental Engineering (FYP) by Title
Now showing items 137-156 of 437
-
Ecotoxicity study of blood cockles (Anadara granosa) near Kg Wai ex-dumping site
(Universiti Malaysia Perlis (UniMAP), 2014-06)Marine blood cockles, Anadara granosa (A. granosa) can be commonly found along the coasts of western Malaysian Peninsular, and for this study it was collected from the shores of Kuala Perlis. Blood cockles are widely ... -
The effect of alkaline treatment on mechanical properties of Polypropylene (PP)/Recycled Acrylonitrile Butadiene Rubber (NBRr)/Banana Skin Powder (BSP) composites
(Universiti Malaysia Perlis (UniMAP), 2014-06)Composite materials are replacing conventional materials in so many fields and natural fibers are also used for the preparation of composites as synthetic reinforcement. However, natural fiber reinforced composites have ... -
Effect of clamshell: sand ratio on production of bricks for load bearing wall in IBS construction
(Universiti Malaysia Perlis (UniMAP)School of Environmental Engineering, 2012-05)This study was carried out to investigate the potential of using clamshell with different percentages as sand replacement in sand brick with ratio 1:3, an its potential to be used as load bearing wall. Clam shell is ... -
Effect of Effective Microorganisms (EM) on concrete performance
(Universiti Malaysia Perlis (UniMAP)School of Environmental Engineering, 2014-05)Concrete technology is life-long research. The technology strives to discover the best additives or admixtures that are able to produce good concrete in terms of physical, chemical and mechanical properties in a more ... -
The effect of epoxy resin compatibilizer on polypropylene(PP)/recycled acrylonitrile butadiene rubber(NBRr)/banana skin powder(BSP)
(Universiti Malaysia Perlis (UniMAP)School of Environmental Engineering, 2015-06)Epoxy Resin (EP) was use as a compatibilizer on the properties of polypropylene(PP)/recycled acrylonitrile butadiene rubber(NBRr)/banana skin powder(BSP) composites to determine the characterization of composites with ... -
The effect of groundwater to deep excavation
(Universiti Malaysia Perlis (UniMAP)School of Environmental Engineering, 2013-06)Excavation is the process by which soil or rock is removing in order to reach required level. Materials resulting from such excavation often employed as fill for embankment or for other construction purposes on the same ... -
Effect of human activity on water quality of Perlis River
(Universiti Malaysia Perlis (UniMAP)School of Environmental Engineering, 2010-04)The project that had been handled is ‘Effect of Human Activities on Water Quality of Perlis River’. This study conducted to observe the effect of anthropogenic on Perlis River water quality. The study focused on determination ... -
Effect of Maleic Anyhride modified Polyproplene (Ppmah) on thermal properties of Polyproplene Recycled Acrylonitrile Butadiene Rubber/Banana skin powder (BSP)
(Universiti Malaysia Perlis (UniMAP), 2014-06)In the mainstream, the demand for plastic-based products has increased drastically over time. Therefore research has discovered a substance that can reduce our dependence on plastic-based items. Polymer composites is latest ... -
The effect of metaldehdye on Anabas testudinues
(Universiti Malaysia Perlis (UniMAP)School of Environmental Engineering, 2015-05)The impact of Metaldehyde on Anabas Testudinues is due to the use of indiscriminate and improper handling of pesticides in agriculture has led to serious health problems and impact on aquatic life as well. In this experiment, ... -
Effect of moisture content on the tensile strength of cengal timber
(Universiti Malaysia Perlis (UniMAP)School of Environmental Engineering, 2013-06)In Malaysia, the usage of timber structure in construction is still low. Generally, the use of timber mainly focuses on structure that can take small loads. Tensile strength is one of the material’s mechanic properties ... -
Effect of operating parameters on sludge ozonation performance
(Universiti Malaysia Perlis (UniMAP)School of Environmental Engineering, 2015-06)Every rubber industry wastewater treatment plant will produce excess sludge which cause danger towards the environment, public. Excess sludge that being produce by the rubber industry tend to spend their moneyfor its ... -
Effect of pH and temperature on sludge ozonation performance
(Universiti Malaysia Perlis (UniMAP), 2014-06)Processing and disposal of excess sludge from rubber industry is one of the most serious problems encountered in terms of environment, finance and technology so that it accounts for 30%-50 % of the total expense of rubber ... -
The effect of pyrolysis parameters on sugarcane bagasse
(Universiti Malaysia Perlis (UniMAP)School of Environmental Engineering, 2015-06)Nowadays, the fossil fuel is depleting and people are finding alternative to replace fossil fuels that are non-renewable resources. Fossil fuel is the main transportation oil that is used worldwide. The objectives of this ... -
Effect of quarry dust on concrete performance
(Universiti Malaysia Perlis (UniMAP)School of Environmental Engineering, 2014-06)The quarry dust is a waste material at the quarry site after the stone is crushed. To reduce the waste material in this world, reuse it is one of the solutions. So that the waste product will not be as a harmful material ... -
The effect of recycled acrylonitrile butadiene rubber (NBRr) on Polypropylene (PP)/(NBRr)/Banana Skin Powder (BSP) composites
(Universiti Malaysia Perlis (UniMAP)School of Environmental Engineering, 2015-05)The effect of recycled acrylonitrile butadiene rubber (NBRr) loadings and compatibilization of polypropylene maleic anhydride (PPMAH) in the polypropylene (PP) / recycled acrylonitrile butadiene rubber (NBRr) / banana ... -
The effect of shear connection on half precast concrete slabs
(Universiti Malaysia Perlis (UniMAP)School of Environmental Engineering, 2012-05)This study introduces a semi- fabricated system for the construction of floor slabs. A prefabricated half precast slab is a manufacturing process, where consist two layer of concrete. Bottom layer fabricate in the factory ... -
Effect of sinusoidal geometry on shear capacity of profiled web girder using finite element method
(Universiti Malaysia Perlis (UniMAP)School of Environmental Engineering, 2014-05)Plate girder is a build up section with a flat web that stiffened transversely and if necessary longitudinally. Profiled web can be alternative solution to eliminate stiffener since the profiled geometry of the web is ... -
The effect of Sodium Hydroxide (NaOH) on Polypropylene (PP) / Recycled Acrylonitrile Butadiene Rubber (NBRr) / Palm Pressed Fibre (PPF) composite
(Universiti Malaysia Perlis (UniMAP), 2014-06)The effect of sodium hydroxide treatment on the performance of Palm Pressed Fibre (PPF) filled polypropylene (PP)/recycled Acrylonitrile Butadiene rubber (NBRr) bio-composites were investigated. Polypropylene/recycled ... -
The effect of steel fiber as addition reinforcement In reinforced concrete beam
(Universiti Malaysia Perlis (UniMAP)School of Environmental Engineering, 2014-06)Steel fiber reinforced concrete has been increasingly used in structural applications during the last four decades. It is generally accepted that addition of steel fibers significantly increases tensile toughness and ... -
Effect of superplasticizer on workability and strength of concrete
(Universiti Malaysia Perlis (UniMAP)School of Environmental Engineering, 2014-06)This research investigates the effects of superplasticizers on workability and strength in concrete mixture. Sulphonated naphthalene formaldehyde (SNF), one of four classes of superplasticizers has been chose in this ...