Browsing School of Environmental Engineering (FYP) by Title
Now showing items 238-257 of 437
-
Natural resource as carbon absorbent in industrial activities
(Universiti Malaysia Perlis (UniMAP)School of Environmental Engineering, 2011-05)Carbon dioxide (CO2) emissions have increased in recent years in the cities of developing countries, due to heavy traffic and low quality fuel. Concentrations in the atmosphere have exceeded the safe limits of 350 ppm since ... -
New brick: Integration between clay and paper sludge
(Universiti Malaysia Perlis (UniMAP)School of Environmental Engineering, 2010-04)Brick is one of the most widely used construction materials in the world. Many modifications and development have been made to place industrial waste such as paper sludge on building construction. Utilization of waste ... -
Nutrients and heavy metal removal from landfill leachate by sub-surface flow (SSF) constructed wetlands planted with Limnocharis flava and Scirpus atrovirens
(Universiti Malaysia Perlis (UniMAP)School of Environmental Engineering, 2011-03)Landfill leachate classified as problematic wastewaters and represents a dangerous source of pollution for the environment due to its fertilizing and toxic effects. Thus, leachate must be treated at the leachate treatment ... -
Nutrients and heavy metal removal from landfill leachate by sub-surface flow (SSF) constructed wetlands planted with Limnocharis Flava and Scirpus Atrovirens
(Universiti Malaysia Perlis (UniMAP)School of Environmental Engineering, 2011-03)Landfill leachate classified as problematic wastewaters and represents a dangerous source of pollution for the environment due to its fertilizing and toxic effects. Thus, leachate must be treated at the leachate treatment ... -
Nutrients removal from landfill leachate using free water surface and subsurface flow in constructed wetland
(Universiti Malaysia Perlis (UniMAP)School of Environmental Engineering, 2012-05)Leachate is one of the major problems in landfill since it contained high levels of organic and inorganic matters. As it was highly contaminated, leachate could not be discharged directly into the surface water bodies. ... -
Optimization of biogas as renewable energy from closed anaerobic digestion biomass for palm oil mill effluent at mesophilic temperature
(Universiti Malaysia Perlis (UniMAP)School of Environmental Engineering, 2010-04)Palm oil mill effluent (POME) is a highly polluting wastewater that pollutes the environment if discharged directly due to its high chemical oxygen demand (COD) and biochemical oxygen demand (BOD) concentration. In ... -
Optimization of Moringa Oleifera extraction method for water and wastewater treatment application
(Universiti Malaysia Perlis (UniMAP)School of Environmental Engineering, 2012-05)Coagulation of water involves the use of coagulating agents to bring the suspended matter in the water together for the next treatment process easier which are settling and the filtration process. A lot of previous studies ... -
Optimum mix ratio of concrete brick using rice husk ash
(Universiti Malaysia Perlis (UniMAP)School of Environmental Engineering, 2014-06)In the era of globalization, the demand for the use of construction materials is greatly increased when looking at the wide usage in construction and rising demand will pose a problem for some of the construction industry. ... -
Overstrength factor for low-rise RC building
(Universiti Malaysia Perlis (UniMAP)School of Environmental Engineering, 2012-05)This research focuses on the application of these sets of new design codes (Eurocode) in the form of spreadsheets from Microsoft Excel for the purpose of analyzing and designing of reinforced concrete elements, mainly beams ... -
O₃/H₂O₂ oxidation of reactive green 19 dye wastewater: performance and decolourization kinetics
(Universiti Malaysia Perlis (UniMAP)School of Environmental Engineering, 2015-06)Dye is a colorant which can be used to dye textile fibres, which means that it has an affinity to the material to which it is applied. Dyes are widely used in the textile industries due to favourable characteristics, ... -
Partial replacement of municipal solid waste incineration bottom ash for cement substitution in brick
(Universiti Malaysia Perlis (UniMAP)School of Environmental Engineering, 2014-06)Nowadays in Malaysia, the issue on environment preservation has lead into a new finding on materials that had been disposed to become a good product for construction field. The generation of Municipal Solid Waste Incinerator ... -
Pb(II) Removal from Aqueous Solution by using Chemically Treated Rice Straw
(Universiti Malaysia Perlis (UniMAP)School of Environmental Engineering, 2015-06)Rice straw was used as an adsorbent for the removal of lead ions from aqueous solutions through batch equilibrium technique to find out the effectiveness of lead removal. From the characterization of adsorbents by using ... -
Performance evaluation of treated adsorbents derived from agricultural waste towards adsortion of azo dyes
(Universiti Malaysia Perlis (UniMAP)School of Environmental Engineering, 2011-04)Wastewaters generated from the industries contain large amounts of azo dyes which, owning to their non-biodegradability, toxicity and potential carcinogenic nature, constitute a major threat to the surrounding ecosystem. ... -
Performance of concrete by using palm oil fuel ash (POFA) as a cement replacement material
(Universiti Malaysia Perlis (UniMAP)School of Environmental Engineering, 2014-05)Palm Oil Fuel Ash (POFA) is one of the solid waste in Malaysia and had trouble in the ash removal. Therefore, the use of waste oil palm ash can overcome the problem of solid waste. Based on previous research, POFA is a ... -
Performance of geotextile as a filter for drainage system
(Universiti Malaysia Perlis (UniMAP)School of Environmental Engineering, 2012-05)Geotextile is very important in engineering field. In this case study, nonwoven geotextile used in the drainage system that acts as a filter. Purpose of this study was to determine the function of nonwoven geotextile as ... -
Performance of reinforced concrete wall panel with rubber tyre as sand replacement for IBS component
(Universiti Malaysia Perlis (UniMAP)School of Environmental Engineering, 2014-06)Reinforced concrete wall panel is a component used in the design and structure of buildings as space dividers or as load bearing walls, especially for application in the Industrilized System (IBS). The use of rubber tyres ... -
Performance of saw dust ash (SDA) as cement replacement on the compressive strength of concrete
(Universiti Malaysia Perlis (UniMAP)School of Environmental Engineering, 2014-06)This research considered the potential of saw dust ash as partial replacement of cement to the compressive strength and other mechanical strength of concrete. Saw dust ash was used as it one of industrial wastes product ... -
Performance of waste settlement at Pulau Burung Sanitary Landfill
(Universiti Malaysia Perlis (UniMAP)School of Environmental Engineering, 2010-05)Waste settlement process in the sanitary landfill is an important aspect that should consider in managing the landfill. Factor affecting the waste settlement should be considered to estimate the rate of waste settlement. ... -
Photocatalytic degradation of Azo Dye with encapsulated Zinc oxide
(Universiti Malaysia Perlis (UniMAP), 2014-06)Wastewater from textile dyeing and food processing contains high concentration of coloring agent which is infamous for their difficulties to degrade and remove. Dye molecule in water body is highly visible at low concentration ... -
Photocatalytic degradation of Brilliant Green and Acid Orange 7 in single and binary solution using TiO2 as catalyst
(Universiti Malaysia Perlis (UniMAP)School of Environmental Engineering, 2012-05)The present study deals with the investigation of photocatalytic degradation of Acid Orange 7 and Brilliant Green dyes in single and binary solution effect of initial dyes concentration, dosage of catalyst, initial pH and ...