Now showing items 60-79 of 638

    • Bacteria isolation and bioremedation of heavy metal in sediment of coastal area 

      Arina Azmina, Ahmad Zubir (Universiti Malaysia Perlis (UniMAP)School of Environmental Engineering, 2015-06)
      Coastal area sediments are normally contaminated with heavy metals resulted from the anthropogenic activities that occurs daily such as boat and ferries activities. The types of heavy metals that are identified in the ...
    • Beam anchorage bond test between lightweight aggregate concrete and plain reinforcing bars 

      Tan, U-Shang (Universiti Malaysia Perlis (UniMAP), 2015-06)
      In this study, waste product palm oil clinker (POC) is use as fine aggregate to create lightweight aggregate concrete and the bond strength between the POC concrete and plain round reinforcing bars will be tested. The beam ...
    • Beam anchorage bond test between lightweight aggregate concrete and reinforcing bar 

      Chang, Wai Hoe (Universiti Malaysia Perlis (UniMAP), 2015-06)
      Malaysia is well known as the main crude palm oil producer and million tonnes of palm oil clinker (POC) is being produced every year with no commercial return on it. In this study, POC is used as LWA in concrete to study ...
    • Beam anchorage bond test between lightweight aggregate concrete and water/cement ratio after elevated temperatures 

      Ahmad Sapri, Haris (Universiti Malaysia Perlis (UniMAP), 2015-06)
      The lightweight aggregate concrete are formed by replacing fine aggregate with lightweight aggregate materials, palm oil clinker according to the composition that proposed. The specimen choose in this study is cubes and ...
    • Beam anchorage bond test between lightweight aggregate concrete with different cement content and ribbed reinforcing bar after elevated temperatures 

      Aimi Najwa, Kamar Zaman (Universiti Malaysia Perlis (UniMAP), 2015-06)
      The normal changes of temperature usually will not affect the properties of the strength of concrete. In contrast of that, the concrete behaviour may be different and change under extreme condition of temperature. In this ...
    • Behavior of axially distributed loaded sand brickwall palm oil clinker 

      Muhammad Alffi Fairroz, Wahab (Universiti Malaysia Perlis (UniMAP)School of Environmental Engineering, 2014-06)
      This project is about the research of behavior distributed axial load on the sand Palm Oil Clinker (POC) brick wall. In this study, POC bricks were self-made in the laboratory. There are three samples of the bricks ...
    • The behavior of concrete containing mango seed 

      Nurol Hafizah, Zainal Abidin (Universiti Malaysia Perlis (UniMAP)School of Environmental Engineering, 2013-06)
      Mango seed was used as partial replacement of sand. The replacement is done so that cost in construction reduced. Preparation of the raw material which is mango seed is easy. The mango seed is collected and let to dry. ...
    • Behavior of concrete with saw dust at fresh and hardened states 

      Noor Adlina, Md Daud (Universiti Malaysia Perlis (UniMAP)School of Environmental Engineering, 2013-06)
      Nowadays technology in concrete has been developing in many ways to enhance the quality and properties of concrete. For this project, saw dust is used in the making of concrete. This project is carried out to study the ...
    • Behavior of concrete with saw dust in different curing method 

      Faridatul Anis, Zainuddin (Universiti Malaysia Perlis (UniMAP)School of Environmental Engineering, 2013-06)
      This proposal is intended to study the behavior of concrete with saw dust with different curing method like water tank, plastic, box and wet gunny. The proportioned mixture uses are cement, sand, aggregate, water and saw ...
    • The behavior of rubber tyre as fine aggregate in concrete mix 

      Siti Aza Nurdiana, Tajri (Universiti Malaysia Perlis (UniMAP)School of Environmental Engineering, 2014)
      Rubber tyres are the most waste material that can be found nowadays. Rubber tyre is the resilient materials that was used by people and make it as the waste tyre disposal after the tyre was not function anymore. Therefore, ...
    • Behavioral study of concrete composite with mixture of fly ash and concrete sludge aggregate 

      Mohd Shakirim, Harith (Universiti Malaysia Perlis (UniMAP)School of Environmental Engineering, 2013-06)
      Nowadays, the high demand of cement and aggregate are an indication of development especially for the construction industry. Thus, the alternative to replace partial replacement of cement and aggregate are by using the ...
    • Behavioral study of steel transmission tower toward wind loading using STAAD.Pro V8i 

      Show, Bor Jlunn (Universiti Malaysia Perlis (UniMAP)School of Environmental Engineering, 2012-05)
      With today’s developments of power transmission systems, a huge number of structural steel towers to support in the connection of power cables are being constructed in Malaysia. However, wind is one of the most important ...
    • The behaviour of construction waste as coarse aggregates 

      Norhayati, Hasim (Universiti Malaysia Perlis (UniMAP)School of Environmental Engineering, 2012-05)
      This research is one of the positive methods by recycling construction waste material as the replacement to coarse aggregate in concrete mixture. The purpose of this study is to determine the performance of crushed ...
    • The behaviour of masonry wall constituted by hollow blocks: strength correlation 

      Mohamad Amru, Mustafa (Universiti Malaysia Perlis (UniMAP)School of Environmental Engineering, 2012-05)
      This paper focuses on the development of the compressive strength correlation between the individual block, prism and basic wall panel for load bearing interlocking hollow mortarless blocks. The interlocking blocks used ...
    • Behaviours of precast concrete wall panel with opening in one way actions under vertical load 

      Chong, Fung Yun (Universiti Malaysia Perlis (UniMAP), 2016-06)
      Reinforced concrete walls panel are tested in one-way action with different configuration of opening. The sizes of the opening were provided in the walls as percentage of total wall area with 5 % and 10 %. To resemble ...
    • Biodegradation of Polycyclic Aromatic Hydrocarbons (PAHs) by biosand filter 

      Nur Zahafarina, Mohd Zaki (Universiti Malaysia Perlis (UniMAP), 2016-06)
      To investigate the removal efficiency of Biosand Filter (BSF) by using real wastewater. To identify the detection of Polycyclic Aromatic Hydrocarbons in drainage water around urban area in Kangar, Perlis before and after ...
    • Biodegration of biodiesel 

      Noor Anis Azziana, Zulkiple (Universiti Malaysia Perlis (UniMAP)School of Environmental Engineering, 2015-06)
      Local bacteria isolated from oil-contaminated soils from several locations in Perlis were screened for their ability to degrade commercial biodiesel fuel. The enrichment of bacteria culture from the soil samples yielded ...
    • Biosorption removal of Methylene Blue dye from aqueous solution using modified sugarcane bagasse 

      Clara, Wong Xiang Xiang (Universiti Malaysia Perlis (UniMAP)School of Environmental Engineering, 2010-04)
      This research was on the activated carbon produced from sugarcane bagasse, existing wide as waste in Malaysia and other countries producing sugar, for dye removal. Two different activated carbons (AC1 and AC2) were synthesized ...
    • Bond strength in indirect tensile and compressive strength of fire damaged concretes 

      Muhammad Nazrin, Haris (Universiti Malaysia Perlis (UniMAP), 2015-06)
      The aims of this study are to investigate the compressive strength and bond strength at fire damaged concrete. The design strength of normal concrete is 30 MPa according to BS 1881. There were 12 sample of 100 x 100 x 100mm ...
    • Bond strength in shear between normal concrete and fire damaged concrete 

      Juliane Ileana, Ismail (Universiti Malaysia Perlis (UniMAP), 2015-06)
      Concrete is possibly exposed to elevated temperatures during the fire on when it is near to furnace and reactors. The mechanical properties such as strength, modulus of elasticity and volume stability of concrete are ...