• Carbon footprint assessment on machineries usage at construction site 

  Norashikin, Razali (Universiti Malaysia Perlis (UniMAP), 2015-06)

  One of the major problems of construction activity towards environmental is greenhouse gases emission. This study introduces the assessment of carbon footprints on machineries usage at the construction site based on the ...

• Calibration of rainfall-reflectivity in northern region of Peninsular Malaysia 

  Mohamad Azmil, Ishak (Universiti Malaysia Perlis (UniMAP), 2015-06)

  This project studies are about to derive new ZR relationship at the Alor Star radar. ZR relationship is applied to estimate the rainfall. A long time ago, Marshall and Palmer were created an equation to estimate the rainfall ...

• The different in sofware esteem and orion for design concrete frame structure 

  Lee, Pui Chin (Universiti Malaysia Perlis (UniMAP), 2015-06)

  Building Information Modelling (BIM) is one of the new emerging technologies in construction, design and digital format representative. This research design involved two types of structural design software which were Esteem ...

• Landslide simulation using limit equilibrium and finite element method 

  Kok Alfred, Chee Jee (Universiti Malaysia Perlis (UniMAP), 2015-06)

  Slope stability analysis is one of the ancient tasks in the geotechnical engineering. There are two major methods that is limit equilibrium method and finite element method are used to analyze the stability of slope. The ...

• Bond strength in shear between normal concrete and fire damaged concrete 

  Juliane Ileana, Ismail (Universiti Malaysia Perlis (UniMAP), 2015-06)

  Concrete is possibly exposed to elevated temperatures during the fire on when it is near to furnace and reactors. The mechanical properties such as strength, modulus of elasticity and volume stability of concrete are ...

• Development of a thermal insulating polystyrene concrete block 

  Jessica Loo, Si Jia (Universiti Malaysia Perlis (UniMAP), 2015-06)

  Polystyrene concrete was considered as a new invention in construction industry as the development is still not matured. Polystyrene is a good lightweight material that is used to replace aggregate in concrete because it ...

• Study on monitoring of concrete curing process using hyper terminal software 

  Jenredi, Udom (Universiti Malaysia Perlis (UniMAP), 2015-06)

  The study of this paper is to monitor the concrete curing process using Hyper Terminal software between two different samples of concrete mixtures. One is normal concrete mixture as a control sample and another is the ...

• Green technology awareness among construction organization 

  Fatin Farhana, Hasbullah (Universiti Malaysia Perlis (UniMAP), 2015-06)

  Global awareness toward environmental friendly issues which caused from the side effect of irresponsible construction activities had been a popular topic among the Malaysian citizen nowadays. This is because the society ...

• A study of soil nailing using bamboo 

  Chew, Seen Hooi (Universiti Malaysia Perlis (UniMAP), 2015-06)

  Soil nailing system is a preventive method that utilized to stabilize the slope and minimize the soil creep effect. The objective of this research are to identify the safety factor of slope stability using bamboo and steel ...

• Beam anchorage bond test between lightweight aggregate concrete and reinforcing bar 

  Chang, Wai Hoe (Universiti Malaysia Perlis (UniMAP), 2015-06)

  Malaysia is well known as the main crude palm oil producer and million tonnes of palm oil clinker (POC) is being produced every year with no commercial return on it. In this study, POC is used as LWA in concrete to study ...

• Comparison of slope remediation method on slope stability of man-made slope 

  Amirul Arif, Othman (Universiti Malaysia Perlis (UniMAP), 2015-06)

  This research discuss about the comparison of slope remediation method on slope stability of man-made slope. This research includes identifying the soil characteristics on the affected slope, evaluation slope stability ...

• Beam anchorage bond test between lightweight aggregate concrete with different cement content and ribbed reinforcing bar after elevated temperatures 

  Aimi Najwa, Kamar Zaman (Universiti Malaysia Perlis (UniMAP), 2015-06)

  The normal changes of temperature usually will not affect the properties of the strength of concrete. In contrast of that, the concrete behaviour may be different and change under extreme condition of temperature. In this ...

• Beam anchorage bond test between lightweight aggregate concrete and water/cement ratio after elevated temperatures 

  Ahmad Sapri, Haris (Universiti Malaysia Perlis (UniMAP), 2015-06)

  The lightweight aggregate concrete are formed by replacing fine aggregate with lightweight aggregate materials, palm oil clinker according to the composition that proposed. The specimen choose in this study is cubes and ...

• Feasibility study of using dry sludge as filler to improve mechanical properties of concrete 

  Ahmad Azam Syazwan, Sohaime (Universiti Malaysia Perlis (UniMAP), 2015-06)

  This project was conducted to study the potential of dry sewage sludge as filler to improve mechanical properties of concrete. This project is a part of larger project to find different usage from existing application of ...

• Safety in IBS construction: a study on safety during precast concrete installation 

  Adilah Arma, Shaari (Universiti Malaysia Perlis (UniMAP), 2015-06)

  Nowadays, the view of conventional method had been changed due to emerging of advanced technologies. The emerging of Industrialized Building System (IBS) shown that this system can improve the technology in construction ...

• Study on performance of concrete containing steel slag aggregate 

  Adibah, Zainon (Universiti Malaysia Perlis (UniMAP), 2015-06)

  Steel slag is an industrial by-product of steel industry. Steel slag was selected due to its characteristics, which are almost similar to conventional aggregates and the fact that it is easily obtain. It consists of disposal ...

• Water Quality Index (WQI) of Sungai Perlis with application of Geographical Information System (GIS) 

  Nurul Izati, Haseenar (Universiti Malaysia Perlis (UniMAP), 2014-06)

  Rivers is one of the sources of water for human, animal and plant. Rivers provide food, energy, recreation, transportation routes, and of course water for irrigation and for drinking. The quality of river has been noted ...

• Screening and isolation of pesticides-degrading bacteria from activated sludge 

  Nur Zahidah, Yusof (Universiti Malaysia Perlis (UniMAP), 2014-06)

  Screening and isolation of pesticides-degrading bacteria from activated sludge study was carried out to identify the degrading bacteria of pesticides. Pesticides degrading bacterial were isolated from activated sludge of ...

• Comparative study of Mangifera Indica peel to leaf as potential low cost adsorbent in removal of Chromium (VI) from aqueous solution 

  Nur Jamilah, Mohamad Zulkafli (Universiti Malaysia Perlis (UniMAP), 2014-06)

  This study proposed a comparative study of potential low-cost adsorbent; Mangifera Indica Peel (MIP) and Mangifera Indica Leaf (MIL) for removal of hexavalent Chromium, Cr (VI) in aqueous solution. Both adsorbents are ...

• Extraction and characterization of Omega-3 fatty acid from Jade Perch (Scortum barcoo) using enzymatic hydrolysis technique 

  Yee, Chee Hann (Universiti Malaysia Perlis (UniMAP), 2017-12)

  Extraction of Omega-3 fatty acid from Jade Perch using enzymatic hydrolysis techniques are expected to be more economically possible techniques due to the uses of enzyme with the characteristic of reusable, environmental ...

View more