School of Manufacturing Engineering (FYP)
Browse by
Recent Submissions
-
Study and analysis of gas leakage and lubricating system for rotary valve of internal combustion engine
(Universiti Malaysia Perlis (UniMAP), 2009-04)This project present new seal design of seal for new rotary valve for internal combustion engine. Seal designed to decrease gas leakage in rotary valve especially at high gases pressure area. In this paper will show ... -
Ergonomics intervention in manual milling operation workstation
(Universiti Malaysia Perlis (UniMAP), 2016)Manufacturing sector is vital in driving Malaysia’s economy and this project’s focus is to induce the ergonomics and safety concerns in the sub-element of this sector. Manual milling operation is a precise and accurate ... -
Design improvement on a wheelchair with addition of a semi-auto lift mechanism
(Universiti Malaysia Perlis (UniMAP), 2016)This project is about the design improvement on a wheelchair with the addition of a semiauto lift mechanism. This study is focused on Paraplegia Patients because they are the major wheelchair users. Nowadays, wheelchair ... -
A study on miniature compressed air storage system using double-acting cylinder for portable device
(Universiti Malaysia Perlis (UniMAP), 2016-06)Nowadays, there are many research study on the pneumatic device on vehicles. There is some application using compressed air storage system to produce vehicle power. However, there are some troubles facing to produce ... -
Productivity rate mathematical model analysis and development of graphical user interface (GUI) for linear arrangement with serial action automated flow line
(Universiti Malaysia Perlis (UniMAP), 2016-06)This research is to design a PALSAS for productivity rate in a linear arrangement with serial action automated flow line. Productivity is an important criterion for a manufacturing industry, so a method to measure, analysis, ... -
Effect of hygrothermal environment on composite bonded joint
(Universiti Malaysia Perlis (UniMAP), 2016-05)The objective of this project is to identify the effect of varying hygrothermal environment of composite bonds joint in real working area. Two numbers of physical tests were conducted on carbon and glass fiber prepregs ... -
Production visual practices assessment in manufacturing industry : a case study in advanced manufacturing industry
(Universiti Malaysia Perlis (UniMAP), 2016-05)Visual Management is acknowledged in visual working environments, which are organized with information giving, flagging, restricting or ensuring. This paper approaches visual system in lean manufacturing and aims to identify ... -
Design and development of extraction and filtering system for Misai Kucing tea in Frutania company
(Universiti Malaysia Perlis (UniMAP), 2016-06)The purpose of this project is to design and develop an extraction and filtering system for Misai Kucing tea in Frutania Company. Extraction and filtering process is one of the major process for product Misai Kucing tea ... -
Green energy production using magnetic forces
(Universiti Malaysia Perlis (UniMAP), 2016-06)Back to past decades, green energy has been introduced regarding the global warming issues related to usage of the non-renewable energy. However, the available renewable energy has limitation and mostly related to location ... -
The application of value stream mapping in a food-based industry
(Universiti Malaysia Perlis (UniMAP), 2016-06)Unnecessary movement of workers is one of the seven sources of waste. This project was conducted in order to reduce unnecessary movement during the production of 2in1 Green coffee by applying Value Stream Mapping at the ... -
Study of controlling system for high speed mud boat
(Universiti Malaysia Perlis (UniMAP), 2016-06)This project focuses to study the control system for high speed mud boat. This study intends to identify the best type of control system for use on high-speed mud boat. A several studies have been done on the system ... -
Economic analysis on PRICO process for liquefaction of natural gas
(Universiti Malaysia Perlis (UniMAP), 2016)The PRICO process is a single mixed-refrigerant process used for small-scale LNG plants, including offshore terminals. The working fluid (refrigerant) is a mixture of methane, ethane, butane and nitrogen. The behavior ... -
Design and development of dual functional go-kart seat
(Universiti Malaysia Perlis (UniMAP), 2016-06)This project aims to design seat based on ergonomics characteristics and to make the seat has suspension system to isolate the vibration due to surface roughness. This is because the flaw of the product become inconvenient ... -
Improvement of plastic roll change process on primary packing machine using Lean and Six Sigma approaches
(Universiti Malaysia Perlis (UniMAP), 2016-06)Continuous improvement process is a tradition of method improvement focusing the elimination of waste in all systems and process in an organisation. Continuous improvement has been an important part of manufacturing ... -
Analysis of automated swallow bird feeding machine
(Universiti Malaysia Perlis (UniMAP), 2016-06)This final year paper report is about design and analysis of automated swallow bird feeding machine. For this project, it is focus on the development of the machine and the analysis of the machine. Currently, the bird ... -
A thermal study on workpiece during turning process
(Universiti Malaysia Perlis (UniMAP), 2016-06)During a turning process, heat is generated at the edge of the cutting tool. This heat is then dissipated through the four systems that make up the process which are the cutting tool, the workpiece the chip formed and ... -
Design and development of an innovative “Gamat” oil bottle or dispenser
(Universiti Malaysia Perlis (UniMAP), 2016-06)“Gamat” is a marine life that usually lives in the cracks of the rocks. It is able to cure many diseases. Because of that, “Gamat” oil has been produced and bottled in treating minor injuries, joint pain and as massage ... -
Design improvement of cerebral palsy easy carrier
(Universiti Malaysia Perlis (UniMAP), 2016-06)This project was to design and improve a cerebral palsy child easy carrier used when travelling in a vehicle. A seating support which is backrest equip with 5 point harness belt are the main component in this design. The ... -
Reduction of coating time for catheter process
(Universiti Malaysia Perlis (UniMAP), 2016-06)The coating process is the process for covering up to the surface outer of catheter. This study was conducted in order to reduce the time for coating process in manufacturing catheter by using the process flow method. ... -
Hybrid microwave sintering of Fe-Cr-Mo
(Universiti Malaysia Perlis (UniMAP), 2016-06)Nowadays, steel are hard metal and widely used in the industry. The hardness metal of steel are high and corrosion resistance. Unfortunately, now the steel has a low mechanical properties and microstructure of particles ...
RSS 1.0