Now showing items 1-20 of 1860

    • Analysis of unsymmetrical fault 

      Firdaus Johan (Universiti Malaysia PerlisSchool of Electrical Systems Engineering, 2007)
      This project is to analyzed of unsymmetrical fault with using the software named Mi Power. In this case of the project we should identify types of fault when fault occurred whether they are Single Line To Ground, Line To ...
    • Synthesis, layout design and simulation of 8-bit Serial Peripheral Interface (SPI) using Leonardo Spectrum and Mentor Graphics tools 

      Siti Aifa Zafirah Ahmad (Universiti Malaysia PerlisSchool Of Microelectronic Engineering, 2007)
      In this project, Serial Peripheral Interface (SPI), was designed. This project will include design, synthesis and simulation of SPI. SPI is a synchronous serial data link that operates in full duplex mode and it will ...
    • The effect of field resistance on speed of DC shunt motor 

      Mubarak Zulkafli (Universiti Malaysia PerlisSchool of Electrical Systems Engineering, 2007)
      The objective of the experiment in this project is to study the speed of DC shunt motor when it is supplied by voltage. The speed of the DC shunt motor is controlled by variable-field resistance. The speed of the DC motor ...
    • Development of new OCDMA detection scheme 

      Norizan Abdul Razak (Universiti Malaysia PerlisSchool of Computer and Communication Engineering, 2007-03)
      A new direct detection technique is proposed for optical code multiple accesses using Double Weight code. In optical system the detection process affect design transmitter and receiver. The Multiple Access Interference ...
    • Design of Voltage Control Oscillator (VCO) In 0.18u CMOS 

      Amier Hafizun, Ab. Rashid (Universiti Malaysia PerlisSchool of Microelectronic Engineering, 2007-03)
      This VCO are designated using cascade technique and differential common-mode change. The measured are 4 stages at 2.0GHz with power dissipation 20mWatt. For this final year project,mentor grahics software has use for design ...
    • The Design of Control Unit for Automatic Lock Parking System Using Visual Basic 

      Abang Abu Bakar Hj. Mohamad Atei (Universiti Malaysia PerlisSchool of Microelectronic Engineering, 2007-03)
      Parking meter system is design for the entrance and exit for the parking area. This parking system is connected to manual or automatic pay station. These systems are based on the same software platform but use different ...
    • Visual Basic Implementation of Electronic Azan Reciter 

      Marlina Abu Bakar (Universiti Malaysia PerlisSchool of Microelectronic Engineering, 2007-03)
      An electronic azan reciter is the program that wills shows the clock and 5’s daily prayer time for each city in Malaysia. This software will remind the user 5 minutes before azan and after azan. This software has been ...
    • Computational Fluid Dynamic (CFD) for Microchannel Microfluidic Devices 

      Mohd Fairuz Harun (Universiti Malaysia Perlis (UniMAP)School of Microelectronic Engineering, 2007-03)
      Microfluidic devices have been developing rapidly since the concept of fluid-integrated-circuits, lab-on-a-chip or micro-total-analysis systems (uTAS) was introduced. Among the great benefits of miniaturized devices are ...
    • Reactive Ion Etching (RIE) Etched Wet-Silica-On-Silicon Analysis for Fluid Wettability 

      Noor Aini Hamimah Abd. Rahim (Universiti Malaysia PerlisSchool of Microelectronic Engineering, 2007-03)
      RIE etched wet silica-on-silicon analysis is more to surface roughness analysis which analysis on silica substrate after plasma etching especially on de-ionized water droplets testing for fluid wettability scope. The thick ...
    • FPGA Implementation of Cash Money Register 

      Mohd Shafari Mohamad Dadiri (Universiti Malaysia PerlisSchool of Microelectronic Engineering, 2007-03)
      Cash money register will record all the sales and help the traders to see with more clearly about their sale. Most sales that have been made will be finish by pressing key “enter” at the keyboard. At the same time, a ...
    • Study of Semi-Recessed LOCOS for Quasi-nanoscale CMOS Device Isolation 

      Mohamad Idzham Abd Sani (Universiti Malaysia PerlisSchool of Microelectronic Engineering, 2007-03)
      This project is entitled as semi-recessed LOCOS for CMOS device isolation. Local oxidation (LOCOS) technique is a widely used method for device isolation in semiconductor process integration. It is a simple, cheap yet and ...
    • The Effect of Process Parameters on Metal Step Coverage for Aluminum by Evaporation Technique 

      Noraishah Azman (Universiti Malaysia PerlisSchool of Microelectronic Engineering, 2007-03)
      The degree to which deposited metals cover steps over topography is important to the yield and reliability of devices in very large scale integrations (VLSI). In evaporated and sputtered thin films, the most difficult steps ...
    • FPGA Implementation of One Lane Traffic Light Controller 

      Ahmad Fairuz, Zamberi (Universiti Malaysia PerlisSchool of Microelectronic Engineering, 2007-03)
      Two-way automobile traffic must be supported by a single lane road, such as on narrow bridges in the country, roads under repair, and other narrow streets to prevent road jammed and car accident. To control the two-way ...
    • Microfluidic Poly-Si Electrodes Capacitor ( Fabrication & Testing ) 

      Esmal Fhadly, Abd Malek (Universiti Malaysia PerlisSchool of Microelectronic Engineering, 2007-03)
      In this project, I have to design, fabricate and testing a Microfluidic capacitor. The dielectric insulator is replaced with a dielectric fluid (deionized water) instead of usual solid state materials. The conductive ...
    • Over current protection simulation for voltage sag in power system 

      Hafizan, Jaladudin (Universiti Malaysia PerlisSchool of Electrical Systems Engineering, 2007-03)
      Voltage sags have become one of the major power quality concerns in recent years facing customer. Characteristics of voltage sags caused by faults in transmission and distribution networks depend on the over current ...
    • A study of neutral currents in three-phase distribution network with non-linear loads 

      Diana Geruka (School of Electrical Systems Engineering, 2007-03)
      Neutral currents are produce by non-linear load. Excessive neutral current can caused a lot of problem to the system. Beside, the third harmonic is the predominant component on the neutral. The total harmonic distortion ...
    • RF transceiver design for UniMAP educational purpose 

      Mohd Fauzi Ghazali (Universiti Malaysia PerlisSchool of Computer and Communication Engineering, 2007-03)
      Next-generation high data rate wireless communication systems offer completely new ways to access information and services. To provide higher data speed and data bandwidth, RF transceivers in next- generation communications ...
    • Final year grade computation using PHP and Java 

      Slyvister Max Well Giluk (Universiti Malaysia PerlisSchool of Computer and Communication Engineering, 2007-03)
      Universiti Malausia Perlis (UniMAP) is a distributed university which located in a few different locations in Perlis as Kangar, Kubang Gajah, Automart, Taman Semarak, Taman Muhibbah, and Kg.Wai.The student’s hostel also ...
    • Simulation on Effects of Different Types of Channel/Drain Engineering Structure on MOS Device Performance 

      Norazlina Mohd Amin (Universiti Malaysia PerlisSchool of Microelectronic Engineering, 2007-03)
      This final year project is aimed to analyze the effects of three different types of channel/drain engineering structure on MOS transistor performance. As a project basis, a 0.35μm process recipe from UC Berkeley is used ...
    • Study the effect of bird’s beak on Fully Recessed LOCOS and Poly Buffered LOCOS using 2 different pad Oxide 

      Hafizal Hafiz Sarjoni (Universiti Malaysia PerlisSchool of Microelectronic Engineering, 2007-03)
      Device isolation is one of the most important technology features towards the realization of very large scale CMOS device integration. Since the early days of semiconductor industry, LOCOS isolation has been the major ...