Now showing items 21-40 of 2181

    • Fabrication Of 50 µm transistor and AlNiAu interconnection process 

      Shaffie Husin (Universiti Malaysia PerlisSchool of Microelectronic Engineering, 2007-03)
      Generally process fabrication transistor will starts by cleaning the wafer, formation region drain, D and source, S, get oxide and deposited aluminum as contact with the source, drain and gate. Mask is very important thing ...
    • 16-Bits High Speed Carry Select Adder 

      Nur Syuhada Muhammad Khariri (Universiti Malaysia PerlisSchool of Microelectronic Engineering, 2007-03)
      This report presents the design, performance evaluation of two design of 16-bit carry select adder. The layout for the high speed 16-bits carry-select adder was present in this report. The comparison of both designs is to ...
    • Characterization of Intermetallic Growth in Gold Ballbonds on Aluminum Metallization 

      Lim Moy Fung (Universiti Malaysia PerlisSchool of Microelectronic Engineering, 2007-03)
      The objective of this project is to study the capability of gold wire bonding process by investigating the intermetallic growth between gold ball bonds and aluminum bond pad. The study includes applying thermal storage ...
    • Design and implementation of a Music Box using FPGA 

      Tan Kian Yiak (Universiti Malaysia PerlisSchool of Microelectronic Engineering, 2007-03)
      A design and implementation of music box using FPGA is presented in this report. FPGA is a digital logic chip that can be programmed to do almost any digital function. An effort has been carried out to make the FPGA to ...
    • The Effect of Power Density on the Surface Layer of Amorphous Thin Film 

      Ahmad Fadzil, Izaharuddin (Universiti Malaysia PerlisSchool of Microelectronic Engineering, 2007-03)
      The development of amorphous silicon (a-Si) device technology since the advent of the first solar cell in 1974 has been truly spectacular with commercial products such as photocopiers, laser printers, facsimile machines, ...
    • BST Sensor Application: Digital Thermometer 

      Nor Aniza Mat Desa (Universiti Malaysia PerlisSchool of Microelectronic Engineering, 2007-03)
      This thesis deals with the research of Barium Strontium Titanate (BST) sensor and its application as digital thermometer. In general BST sensor was still in research stage, because this sensor is the first BST sensors that ...
    • BTST Thin Film Sensor Application: Heat Indicator 

      Nur Faizah Binti Jaafar (Universiti Malaysia PerlisSchool of Microelectronic Engineering, 2007-03)
      This report contains an account of my final year project, which was carried out in the forth year of the Electronic Engineering (B.Eng) degree at Universiti Malaysia Perlis. This paper is based on the design and analysis ...
    • Temperature controller system 

      Mohd Hani Che Mahmud (Universiti Malaysia PerlisSchool of Computer and Communication Engineering, 2007-03)
      After research and discussion, I will take Temperature Controller System such as Final Year Project title. Temperature control system is a combination of software and hardware. The software part will receive an input from ...
    • Gate Oxide Integrity (GOI) Characterization For Deep Submicron CMOS Device 

      Norain Mohd Saad (Universiti Malaysia PerlisSchool of Microelectronic Engineering, 2007-03)
      Since the early days of Very Large Scale Integration (VLSI) era, the scaling of gate oxide thickness has been instrumental in controlling the short channel related effects in state-of-the-art device structure, as MOS gate ...
    • Characterization of Electroless Under Bump Metallurgy for Alsi Bond Pad Composition 

      Norahmad Barzrul Basaruddin (Universiti Malaysia PerlisSchool of Microelectronic Engineering, 2007-03)
      The characterization of electroless under bump metallurgy for AlSi bond pad composition in term of surface morphology and surface roughness was investigated. By using the sample given, the gold layer need to be deposited ...
    • Infrared wireless computer peripheral 

      Cheong Khai Seng (Universiti Malaysia PerlisSchool of Computer and Communication Engineering, 2007-03)
      Overall of the project being done is the implementation of infrared photodiode towards conventional computer peripheral device for mouse keyboard and printer. The transmission of the infrared photodiode is mainly dependant ...
    • The Effect of Annealing Temperature and Dopant Concentration on the Surface Layer of Vanadium Doped Barium Strontium Titanate (BVST) Thin Film 

      Siti Norhaida Abdul Rahman (Universiti Malaysia PerlisSchool of Microelectronic Engineering, 2007-03)
      Vanadium is classified as a transition metal and is the most important in its group. It finds extensive use in the manufacturing of special steels with exceptional strength and toughness. The dopant concentration of ...
    • Polysilicon Process Development – The Effect Of PECVD Process Parameters On The Film Characteristics 

      Mujahidun Mashuri (Universiti Malaysia PerlisSchool of Microelectronic Engineering, 2007-03)
      Thin polycrystalline silicon film has been used in the wide range of applications in the production of integrated circuits and other electronic products. Traditionally, polycrystalline silicon is deposited using Low ...
    • Designing, Fabricating And Characterizing A Microfluidic Capacitor 

      Raymond Anthony Anthonysamy (Universiti Malaysia PerlisSchool of Microelectronic Engineering, 2007-03)
      Today, being the dawn of a new technology wave, Micro electromechanical Systems or MEMS have promised a new beginning to a wide spectrum of fields. Microfluidics marked another milestone in this area as highly effective ...
    • High speed six operands 16-bits carry save adder 

      Awatif Hashim (School of Microelectronic Engineering, 2007-03)
      Adders are commonly found in the critical path of many building blocks of microprocessors and digital signal processing chips. The most important for measuring the quality of adder designs in the past were propagation ...
    • BST Sensor Application: Programmable Night Lamp With Morning Alarm 

      Khairunneesa Hanie Othman (Universiti Malaysia PerlisSchool of Microelectronic Engineering, 2007-03)
      A high potential BST Sensor fabricated at UniMAP’s Clean Room was left unused from any further development even though it has good characteristics. The main aim for this project is to develop an application system prototype ...
    • Design a Wideband Low-Noise Amplifier for Wireless Communication using 0.35-µm CMOS Technology 

      Mohd Hafiz Abu (Universiti Malaysia PerlisSchool of Microelectronic Engineering, 2007-03)
      Low Noise Amplifier (LNA) is one of the receiver front end component. Place near antenna, this part used to minimize the noise figure of the amplifier while providing enough gain with sufficient linearity to overcome the ...
    • Effect of Annealing Temperature and Dopant Concentration on the Surface Layer of Indium Doped Ba0.5Sr0.5TiO3 Thin Film 

      Noor Khairul Anuar Johari (Universiti Malaysia PerlisSchool of Microelectronic Engineering, 2007-03)
      Barium strontium titanate (Ba0.5Sr0.5TiO3) is one of the most important sensing materials for multi-function sensors. Basically, the sensing properties can be controlled by minor modification of the dopants. The purpose ...
    • Simulation on Parameter and Characteristics Extraction Between Two Simulation Packages (Synopsys and PSpice) 

      Nor Aznin Sakrani (Universiti Malaysia PerlisSchool of Microelectronic Engineering, 2007-03)
      The progress of silicon technologies in the last twenty years has traced the path to the unprecedented revolution of information technologies, which has changed everybody’s lifestyles. Apparently, this has happened with ...
    • Energy saving proposal for UniMAP air-conditioning system 

      Siti Norhasliza Jamaluddin (School of Electrical Systems Engineering, 2007-03)
      University Malaysia Perlis (UniMAP) is one of the higher learning institutions in Malaysia, located at northern part of Malaysia. This report presented ideas how to reduce amount of energy usage per month and at the same ...