Now showing items 147-166 of 323

    • The hardware design technique for ultrasonic process tomography system 

      Mohd Hafiz, Fazalul Rahiman, Dr.; Ruzairi, Abdul Rahim, Prof. Dr.; Herlina, Abdul Rahim, Dr.; Nor Muzakkir, Nor Ayob (International Frequency Sensor Association Publishing (IFSA), 2012-06)
      This paper describes a work carried out to design and development an ultrasonic process tomography system. The hardware design technique is of interest of this paper. A number of 32-ultrasonic transducers have been ...
    • Hardware developments of an ultrasonic tomography measurement system 

      Hudabiyah, Arshad Amari; Ruzairi, Abdul Rahim; Mohd Hafiz, Fazalul Rahiman; Herlina, Abd Rahim; Pusppanathan, Muhammad Jaysuman (International Frequency Sensors Association (IFSA), 2011-01)
      This research provides new technique in ultrasonic tomography by using ultrasonic transceivers instead of using separate transmitter-receiver pair. The numbers of sensors or transducers used to acquire data plays an important ...
    • Hardware developments of an ultrasonic tomography measurement system 

      Hudabiyah, Arshad Amari; Ruzairi, Abdul Rahim; Mohd Hafiz, Fazalul Rahiman (International Frequency Sensor Association (IFSA), 2011-01)
      This research provides new technique in ultrasonic tomography by using ultrasonic transceivers instead of using separate transmitter-receiver pair. The numbers of sensors or transducers used to acquire data plays an important ...
    • Hardware implementation of multiple fan beam projection technique in optical fibre process tomography 

      Ruzairi, Abdul Rahim; Mohd Hafiz Fazalul, Rahiman; Lai, Chen Leong; Kok, San Chan; Jon, Fea Pang (Molecular Diversity Preservation International (MDPI), 2008-05)
      The main objective of this project is to implement the multiple fan beam projection technique using optical fibre sensors with the aim to achieve a high data acquisition rate. Multiple fan beam projection technique here ...
    • High degree of testability using full scan chain and ATPG-An industrial perspective 

      Mamun, Ibne Reaz; Lee, W. F.; Hamid, N. H.; Lo, H. H.; Ali Yeon, Mohd Shakaff, Prof. Dr. (Asian Network for Scientific Information, 2009)
      This study describes an efficient design methodology from an industrial perspective on utilizing Register Transfer Level (RTL) coding style, full scan chain implementation and Automatic Test Pattern Generation (ATPG) to ...
    • Homogeneous pin-through-hole component inspection using fringe tracking 

      Kenneth, Sundaraj (World Scientific and Engineering Academy and Society (WSEAS), 2008)
      Automated visual inspection (AVI) systems are playing important roles in ensuring manufacturing quality in the electronic industry especially in the assemblage of printed circuit boards (PCB). Most existing AVIs that are ...
    • Hospital nurse following robot: hardware development and sensor integration 

      Bukhari, Ilias; Ramachandran, Nagarajan, Prof. Dr.; Murugappan, M., Dr.; Khaled, Helmy, Dr.; Awang Sabri, Awang Omar; Muhammad Asyraf, Abdul Rahman (Inderscience Enterprises Ltd., 2014)
      Hospital nurse regularly bring her instrument to the patient using cart. They need to push or pull the cart to the patient bed and bring it back many times in a day. This can be tiresome for nurses because they need to ...
    • A hybrid expert system approach for telemonitoring of vocal fold pathology 

      Hariharan, Muthusamy, Dr.; Kemal, Polatb; Sindhu, Ravindran; Sazali, Yaacob, Prof. Dr. (Elsevier B.V., 2013)
      Acoustical parameters extracted from the recorded voice samples are actively pursued for accurate detection of vocal fold pathology. Most of the system for detection of vocal fold pathology uses high quality voice samples. ...
    • Hypovigilance detection using energy of electrocardiogram signals 

      Arun, S.; Sundaraj, Kenneth, Prof. Madya Dr.; Murugappan, M. (NISCAIR PUBLICATIONS, 2012-12)
      Driver drowsiness and driver inattention are the major causes for road accidents leading to severe traumas such as physical injuries, deaths, and economic losses. This necessitates the need for a system that can alert the ...
    • Identification algorithms of flexible structure using neural networks 

      Ismail, Razali; Ismail, A.Y; Mat Darus, I.Z. (Institute of Electrical and Electronics Engineering (IEEE), 2006)
      This paper present an investigation into the development of identification system approaches for dynamic modelling characterization of a two dimensional flexible plate structures. The least square and recursive least square ...
    • Identification of limiting friction coefficient towards improved hip prostheses 

      Mohd Hafis, Sulaiman; Nur Farahana, Ramli; Mohd Ridzuan, Mohd Jamir; Siti Mahani, Said (Trans Tech Publications, 2013)
      Wear generated by the presence of friction on hip joint contact surfaces can cause debris, which may lead to loosening and failure of the hip prostheses. The objective of this study is to examine the limiting friction ...
    • Illumination and contrast correction strategy using bilateral filtering and binarization comparison 

      Wan Azani, Mustafa; Haniza, Yazid (Universiti Teknikal Malaysia Melaka, 2016)
      Illumination normalization and contrast variation on images areone of themost challenging tasks in the imageprocessing field. Normally, the degrade contrast imagesarecaused by pose, occlusion, illumination,and ...
    • Image fusion using fuzzy logic pixel fusion for dual modality tomography system 

      Muhammad Jaysuman, Pusppanathan; Mahdi Faramarzi; Fazlul Rahman, Mohd Yunus; Nor Muzakkir, Nor Ayob; Ruzairi, Abdul Rahim, Prof. Dr. ; Fatin Aliah, Phang Abdullah, Dr.; Mohd Hafiz, Fazalul Rahiman, Dr.; Anita, Ahmad, Dr.; Loew,  Pei Ling, Dr.; Khairul Hamimah, Abas (Penerbit UTM Press, 2014)
      Process tomography has been widely investigated and developed over time. The aim of this method is to measure the cross-sectional distribution of multiphase flow parameters based on its sensing technique. These single ...
    • Imaging of a metallic object using magnetic induction tomography 

      Muhammad Saiful Badri, Mansor; Zulkarnay, Zakaria; Ruzairi, Abdul Rahim, Prof. Dr. ; Ibrahim, Balkhis; Mohd Fahajumi, Jumaah; Mohd Zikrillah, Zawahir; Herlina, Abdul Rahim, Dr.; Loew, Pei Ling, Dr.; Khairul Hamimah, Abbas (International Frequency Sensor Association Publishing (IFSA), 2013-08)
      This paper describes the metallic imaging results from magnetic induction tomography (MIT) hardware. Copper phantom, representing a high conductivity material, was placed into the measurement region of interest. The initial ...
    • Impact response of thin-walled tubes: A prospective review 

      Fauziah, Mat; Khairul Azwan, Ismail, Dr.; Sazali, Yaacob, Prof. Dr.; Inayatullah, Othman (Trans Tech Publications, 2012-04)
      Thin-walled structures have been widely used in various structural applications asimpact energy absorbing devices. During an impact situation, thin-walled tubesdemonstrate excellent capability in absorbing greater energy ...
    • Implementation of 128/256 bit data bus microprocessor core on FPGA 

      Weng, Fook Lee; Ali Yeon, Md. Shakaff, Prof. Dr. (International Congress for global Science and Technology (ICGST), 2007-05)
      This paper shows the implementation of a large data bus size microprocessor core of 128/256 bits on an Altera Stratix 2 FPGA using a superscalar architecture of 3 parallel pipes with 4 stage pipeline as shown in Figure ...
    • Improved back propagation neural network for the diagnosis of pathological voices 

      Paulraj, M.P.; Sazali, Yaacob, Prof. Dr.; Sivanandam, S. N.; Hariharan, Muthusamy (Association for Advancedment of Modelling and Simulation Techniques in Entreprises (A.M.S.E), 2008)
      Most of vocal and voice diseases cause changes in the voice. ENT clinicians use acoustic voice analysis to characterize the pathological voices. Nowadays, voice diseases are increasing dramatically due to unhealthy social ...
    • Improved classification of Orthosiphon stamineus by data fusion of electronic nose and tongue sensors 

      Ammar, Zakaria; Ali Yeon, Md. Shakaff, Prof. Dr.; Abdul Hamid, Adom, Assoc. Prof. Dr.; Mohd Noor, Ahmad; Maz Jamilah, Masnan; Abdul Hallis, Abd Aziz; Nazifah, Ahmad Fikri; Abu Hassan, Abdullah; Latifah Munirah, Kamarudin (MDPI Publishing, 2010-09-28)
      An improved classification of Orthosiphon stamineus using a data fusion technique is presented. Five different commercial sources along with freshly prepared samples were discriminated using an electronic nose (e-nose) and ...
    • An improved defect classification algorithm for six printing defects and its implementation on real printed circuit board images 

      Ismail, Ibrahim; Zuwairie, Ibrahim; Kamal, Khalil; Musa, Mohd Mokji; Syed Abdul Rahman, Syed Abu Bakar; Norrima, Mokhtar; Wan Khairunizam, Wan Ahmad (ICIC International, 2012-05)
      Because decisions made by human inspectors often involve subjective judg- ment, in addition to being intensive and therefore costly, an automated approach for printed circuit board (PCB) inspection is preferred to eliminate ...
    • Infant cry classification to identify asphyxia using time-frequency analysis and radial basis neural networks 

      Muthusamy, Hariharan; Jeyaraman, Saraswathy; Sindhu, Ravindran; Wan Khairunizam, Wan Ahmad, Dr.; Sazali, Yaacob, Prof. Dr. (Elsevier Ltd, 2012-08)
      A cry is the first verbal communication of infants and it is described as a loud, high-pitched sound made by infants in response to certain situations. Infant cry signals can be used to identify physical or psychological ...