Browsing School of Materials Engineering (FYP) by Title
Now showing items 104-123 of 256
-
Effect of winding angles on the epoxy/kenaf/glass fiber hybrid composite by filament winding process
(Universiti Malaysia Perlis (UniMAP), 2017-06)The study on the effect of winding angle on the mechanical properties of the kenaf/glass fiber epoxy hybrid composite was successfully conducted. In this paper, epoxy matrix, kenaf and glass fiber were selected as the raw ... -
Effect of Zinc additions on Sn-0.7Cu-0.05Ni lead free solder alloy
(Universiti Malaysia Perlis (UniMAP), 2017-06)This project is focusing on the effect of zinc additions on Sn-0.7Cu-0.05Ni lead free solder alloy. The additional of micro-alloying have been developed by using casting technique with different percentage of zinc which ... -
The effects of coconut husk fiber versus coconut shell powder in thermoplastic polyurethane (TPU) composites
(Universiti Malaysia Perlis (UniMAP)School of Materials Engineering, 2016-06)Thermoplastic polyurethane (TPU) is one of the thermoplastic where can be enhanced the characteristics by adding filler. TPU have been used in a wide variety of industries fields. This research describes the effect of ... -
Effects of dynamic vulcanization on properties of polypropylene/natural rubber/thermoplastic starch blends
(Universiti Malaysia Perlis (UniMAP)School of Materials Engineering, 2016-05)The effects of thermoplastic starch (TPS) loading on polypropylene (PP)/natural rubber (NR) blend vulcanized with N, N’-m-phenylene bismaleimide (HVA-2) were investigated. Thermoplastic starch ratios was varied at ... -
Effects of recycled HDPE/PET blend compositions and compatibilizer employment on the mechanical and thermal
(Universiti Malaysia Perlis (UniMAP), 2017-04)This study is focused on the improvement of mechanical properties of recycles high density polyethylene (rHDPE) and recycles polyethylene terephthalate (rPET) and investigates their thermal properties. The rHDPE/rPET with ... -
Effects of T6 treatment on the microstructural changes, hardness and thermal analysis of As-Cast Al-Si-Mg alloys
(Universiti Malaysia PerlisSchool of Materials Engineering, 2008-05)Aluminium-silicon-magnesium is usually applied in automotive industry such as in block engine. The main objective of this project is to study the changes in microstructure, hardness and the thermal analysis curve after ... -
Effects of ultrasonication-assisted homogenization on morphology and properties of thermoplastic starch/cellulose biocomposites
(Universiti Malaysia Perlis (UniMAP), 2017)The thermoplastic starch/cellulose biocomposites were manufactured as green biocomposite films. TPS was produced through plasticization which the mixture of granule starch, water and glycerine went through the heating ... -
Electroplating copper on aluminium alloy
(Universiti Malaysia Perlis (UniMAP)School of Materials Engineering, 2016-06)Electroplating of copper on aluminium alloy surface by using copper sulphate solution as an electrolyte solution. This study was done to analyse the influence of voltage (5V-25V) on electroplating of copper on aluminium ... -
Establishment of material selection and design consideration for bulletproof vest
(Universiti Malaysia Perlis (UniMAP)School of Materials Engineering, 2015-11)A bulletproof vest is a protective clothing that is worn on the body of the wearer. Basically a bulletproof vest is used to absorb or disperse the impact and reduce or prevent the penetration of projectiles and shrapnel ... -
Ethylene Vinyl Acetate (EVA) nanocomposites incorporation hybrid nanofillers for Biomedical applications
(Universiti Malaysia Perlis (UniMAP)School of Materials Engineering, 2016-06)Ethyl vinyl acetate (EVA) copolymers possess exceptional mechanical properties, barrier properties and biocompatibility, thus they are potentially to become as materials for biomedical applications. In this research, ... -
Extracted silica from Cymbopogancitratus (lemon grass) as a novel silica in vulcanized natural rubber latex prepared
(Universiti Malaysia Perlis (UniMAP)School of Material Engineering, 2016-06)Extracted silica from cymbopogancitratus (lemongrass) was used as novel filler for vulcanized natural rubber latex. Whereas silica sand and titanium dioxide was chosen for as comparison filler with extracted filler. In ... -
Extraction of Copper from Aqueous Sulfate medium using microcapsule coated with Cyanex 301
(Universiti Malaysia PerlisSchool of Materials Engineering, 2008-03)The copper extraction with the microcapsules containing Cyanex 301 which prepared by solvent evaporation method was study. Gum arabic as dispersion stabilizer and dichloromethane as solvent are used in microcapsules ... -
Fabrication and characterization of Ceramic Porcelain tiles
(Universiti Malaysia PerlisSchool of Materials Engineering, 2008-04)Fabrication of ceramic tiles requires detailed attention on the processing parameters such as raw material size and weight percentage, forming and drying process, and sintering temperature. The scope of the project is to ... -
Fabrication of Al-based metallic glasses by mechanical alloying and hot consolidation
(Universiti Malaysia Perlis (UniMAP), 2017-04)This project is related to fabrication of aluminium based amorphous metallic glasses. Elemental powder of aluminium, copper and nickel were used for the purposed mentioned. The element powders with nominal composition ... -
Fabrication of graded Porous Hydroxyapatite by using coconut fibre
(Universiti Malaysia PerlisSchool of Materials Engineering, 2008-04)This study was carried out to develop sample hydorxyapatite (HA) cylindrical with have porous in particular part for example his external layers has solid part while on the inside it exist porous. Further it can make as ... -
The fabrication of heparin imprinted fiber membrane using electrospinning
(Universiti Malaysia Perlis (UniMAP), 2016-06)The studies of the fabrication of Heparin Imprinted Fiber membrane using Electrospinning was presented and investigated. This studies is about electrospinning method use to produce membrane from Polyvinylidene fluoride ... -
Fabrication of Photoanode and its performance in Photocatalytic fuel cell
(Universiti Malaysia Perlis (UniMAP)School of Materials Engineering, 2016-05)Photocatalytic fuel cell system (PFC) is a new technology for simultaneous organic wastewater treatment and electricity generation. Different composition of photoanode and different layers of photoanode were fabricated ... -
The fabrication of porcelain ceramic via Wet casting technique
(Universiti Malaysia PerlisSchool of Materials Engineering, 2008-04)Porcelain ceramic which composed of ball clay, kaolin, silica and feldspar were fabricated and investigated to study the effect of sintering temperature on mechanical properties. Two types of parameter were used in these ... -
Failure analysis simulation of polymeric foam composite using ANSYS 15.0
(Universiti Malaysia Perlis (UniMAP)School of Materials Engineering, 2016-05)Kajian ini menerangkan kesan multi tiubnano berdinding karbon (MWCNTs) ke atas sifat, terutama sifat-sifat busa poliuretana tegar (PU) dihasilkan daripada polyol minyak sawit (POP)dan metilena diphenyl diisosianat (MDI). ... -
High temperature performance of foamed fly ash geopolymers
(Universiti Malaysia Perlis (UniMAP)School of Materials Engineering, 2016-06)Nowadays, the environmental sustainability becomes a big issues for an industry when they are going to produce the waste material such as ash and dust. These materials will cause various effects to the environment such ...