Now showing items 14-33 of 256

    • Bamboo for Copper 

      Chuar, Pei Chee (Universiti Malaysia Perlis (UniMAP)School of Materials Engineering, 2016-04)
      In this research, bamboo was used as ac for Cu (II) removal. Original and adsorbed bamboo was characterized by Scanning Electron Microscopy (SEM) and Fourier Transform Infrared Spectrum (FTIR). The concentration of copper ...
    • Banana trunk for zinc (II) removal 

      Yuan, Yong Lit (Universiti Malaysia Perlis (UniMAP)School of Materials Engineering, 2016-06)
      The purpose of this study is to investigate the effectiveness of agro-waste, namely banana trunk fibres act as an adsorbent for zinc ion removal in aqueous solution. The surface morphology and the functional group exist ...
    • Basic study on oxidation treatment of rice husk 

      Mohd Harizal, Abd Halim (Universiti Malaysia PerlisSchool of Materials Engineering, 2008-04)
      White husk ash suitable for use as reinforcement material for metal matrix composites. This rice husk based reinforcement material are material are prepared by first removing volatile constituent by heating the husks to a ...
    • Beneficiation and extraction of Malaysian's iron ores 

      Ahmad Farhan Ikmar, Mohd Zulkipli (Universiti Malaysia Perlis (UniMAP)School of Material Engineering, 2016-06)
      This present study is to study the influence of the different sizes of iron ore from Bukit Besi, Terengganu and Kulim, Kedah on the reduction process with coke from Perwaja Steel, Kemaman, Terengganu as a reducing agent. ...
    • Building of composite system for Wing using Prepreg 

      Siti Noorkhartina Ishak (Universiti Malaysia PerlisSchool of Materials Engineering, 2008-04)
      The effect of fibre reinforcement and resin content on moisture uptake in composite laminate was investigated. Three materials using identical epoxy resin systems but different reinforcements glass, kevlar and carbon ...
    • Cathode materials for high energy density rechargeable lithium-ion batteris 

      Gan, Kian Chao (Universiti Malaysia Perlis (UniMAP)School of Materials Engineering, 2016-05)
      In this project, the Li2MnO3 cathode material is synthesis using solid-state reaction. The characterization is done by using X-ray diffraction (XRD), Scanning electron microscope (SEM) and Thermogravimetric analysis (TGA). ...
    • The characterisation of the citronella fiberboards 

      Siti Syahirah, Zailani (Universiti Malaysia Perlis (UniMAP)School of Materials Engineering, 2016-06)
      As substitution of wood, citronella has a seen as a great potential substitution of wood for manufacturing of fiberboard composite. However, the problem encountered when there is incompatibility between the matrix and the ...
    • Characterization and chemical oxidation of Nanoclay filled low density Polyethylene (LDPE) composites: the effect of Poly (acrylic acid) 

      Hafizan Hassan (Universiti Malaysia PerlisSchool of Materials Engineering, 2008-04)
      The effects of poly(acrylic acid) (PAA) on the characterization and chemical oxidation of low density polyethylene (LDPE) and nanoclay were studied with a Differential scanning calorimetriy (DSC), Thermalgravimetry analysis ...
    • Characterization and properties of Citronella Filler Filled Low Density Polyethylene/ Ethylene Propylene Diene Monomer 

      Fatin Nur Hawa, Che Lah (Universiti Malaysia Perlis (UniMAP)School of Materials Engineering, 2016-05)
      Thermoplastic Elastomer (TPE) composite reinforced with cymbopogon nardus, (citronella filler, CF) was prepared via melt blending method using heated two roll mill at temperature 160°C, screw rotational speed at 40rpm ...
    • Characterization and properties of corn cob regenerated cellulose biocomposite films using ionic liquid 

      Lai, Lee Cheah (Universiti Malaysia Perlis (UniMAP)School of Materials Engineering, 2016-05)
      The regenerated cellulose (RC) biocomposite films from corn cob (CC) and microcrystalline cellulose (MCC) were prepared using ionic liquid, N, NDimethylacetamide (DMAc) and Lithium Chloride (LiCl) were used as solvent ...
    • Characterization and thermal properties of Chitin from golden apple snail 

      Mohammad Azri, Azizan (Universiti Malaysia Perlis (UniMAP)School of Materials Engineering, 2016-05)
      The effect of acid and bases treatment on chitin with characterization and thermal properties were studied. In this study, golden snail shells were using as raw material in isolated the crustacean’s chitin using 1 M and ...
    • Characterization of casting alloy Al 319 (Al-12Si-4Cu-0.1Mg), PROTON cylinder head 

      Khairul Khusairi Kamaludin (Universiti Malaysia PerlisSchool of Materials Engineering, 2008-04)
      The present study was undertaken to investigate the effect of metallurgical parameters on the hardness, microstructural characterization and porosity of heat-treated 319 alloys, with the aim of adjusting these parameters ...
    • Characterization of Dolomite and its suitability as a raw material for soap production 

      Mohd Azizi Azanul Mohamad Rapi (Universiti Malaysia PerlisSchool of Materials Engineering, 2008-04)
      This study is about characterization and soap production by using dolomite as a raw material. Calcium hydroxide and magnesium hydroxide also have been used in this study as a raw material. Soap are made from fats and oil ...
    • Characterization of starch degradation during thermo-enzymatic hydrolysis 

      Tashny Inba (Universiti Malaysia PerlisSchool of Materials Engineering, 2008-05)
      The behaviour of the enzyme (α-amylase and amyloglucosidase) during thermoenzymatic hydrolysis of starch is very important from an industrial point of view. The thermoenzymatic hydrolysis of these enzymes on starch depends ...
    • Characterization on the effect of electrospinning parameters on polyacrylonitrile 

      Nurul Azni, Bakaruddin (Universiti Malaysia Perlis (UniMAP)School of Materials Engineering, 2016-05)
      This research focuses on characterization on the effect of electrospinning parameters on polyacrylonitrile (PAN). Polyacrylonitrile (PAN) is used as the main materials in this research. PAN undergoes electrospinning ...
    • Chemical modification of wood fiber on the properties of Polypropylene/Wood fiber composites 

      Azieyanti Nurain, Azmin (Universiti Malaysia PerlisSchool of Materials Engineering, 2008-05)
      The surface of wood fiber used as reinforcement in polypropylene/wood fiber composites was modified by acrylic acid. The effect of filler loading and acrylic acid as compatibilizer on mechanical properties, water absorption ...
    • Chemical stability of fly ash geopolymers 

      Chie, Wong Jia (Universiti Malaysia Perlis (UniMAP)School of Materials Engineering, 2016-06)
      Effects of different types of chemical effects on fly ash geopolymers properties have been studied. The fly ash geopolymers would be subjected to chemical immersion of alkali and acid. The properties are studied based on ...
    • Coefficient of Thermal Expansion (CTE) study in metal matrix composite of CuSiC Vs AlSiC 

      Mohammad Nur Arif, Mohammad Nizam (Universiti Malaysia Perlis (UniMAP)School of Materials Engineering, 2016)
      Metal matrix composites are mostly used as advanced materials for thermal management applications. In high technology application demands, the materials with low CTE and high thermal conductivity are required. Copper ...
    • Conductive coating strategy for Magnesium alloy as a surface protection and reliability 

      Ooi Peng Sheng (Universiti Malaysia PerlisSchool of Materials Engineering, 2008)
      The methods and technologies in various coatings for magnesium alloys are studied. The magnesium alloy used in this final year project is AZ91D, which is still in very early using stages in semiconductor industry. This ...
    • Controlling the synthesis parameter during Fe(OH)₂ precipitation for goethite formation 

      Noraishah, Mohamed Noor (Universiti Malaysia Perlis (UniMAP)School of Materials Engineering, 2016-05)
      Iron oxide were synthesized goethite free of magnetic impurities with different crystal sizes in different molar ratio and mixing time through the reverse precipitation of FeSO₄∙7H₂O and NaOH. Mostly goethite mineral ...