Browsing School of Materials Engineering (FYP) by Title
Now showing items 116-135 of 256
-
Fabrication and characterization of Ceramic Porcelain tiles
(Universiti Malaysia PerlisSchool of Materials Engineering, 2008-04)Fabrication of ceramic tiles requires detailed attention on the processing parameters such as raw material size and weight percentage, forming and drying process, and sintering temperature. The scope of the project is to ... -
Fabrication of Al-based metallic glasses by mechanical alloying and hot consolidation
(Universiti Malaysia Perlis (UniMAP), 2017-04)This project is related to fabrication of aluminium based amorphous metallic glasses. Elemental powder of aluminium, copper and nickel were used for the purposed mentioned. The element powders with nominal composition ... -
Fabrication of graded Porous Hydroxyapatite by using coconut fibre
(Universiti Malaysia PerlisSchool of Materials Engineering, 2008-04)This study was carried out to develop sample hydorxyapatite (HA) cylindrical with have porous in particular part for example his external layers has solid part while on the inside it exist porous. Further it can make as ... -
The fabrication of heparin imprinted fiber membrane using electrospinning
(Universiti Malaysia Perlis (UniMAP), 2016-06)The studies of the fabrication of Heparin Imprinted Fiber membrane using Electrospinning was presented and investigated. This studies is about electrospinning method use to produce membrane from Polyvinylidene fluoride ... -
Fabrication of Photoanode and its performance in Photocatalytic fuel cell
(Universiti Malaysia Perlis (UniMAP)School of Materials Engineering, 2016-05)Photocatalytic fuel cell system (PFC) is a new technology for simultaneous organic wastewater treatment and electricity generation. Different composition of photoanode and different layers of photoanode were fabricated ... -
The fabrication of porcelain ceramic via Wet casting technique
(Universiti Malaysia PerlisSchool of Materials Engineering, 2008-04)Porcelain ceramic which composed of ball clay, kaolin, silica and feldspar were fabricated and investigated to study the effect of sintering temperature on mechanical properties. Two types of parameter were used in these ... -
Failure analysis simulation of polymeric foam composite using ANSYS 15.0
(Universiti Malaysia Perlis (UniMAP)School of Materials Engineering, 2016-05)Kajian ini menerangkan kesan multi tiubnano berdinding karbon (MWCNTs) ke atas sifat, terutama sifat-sifat busa poliuretana tegar (PU) dihasilkan daripada polyol minyak sawit (POP)dan metilena diphenyl diisosianat (MDI). ... -
High temperature performance of foamed fly ash geopolymers
(Universiti Malaysia Perlis (UniMAP)School of Materials Engineering, 2016-06)Nowadays, the environmental sustainability becomes a big issues for an industry when they are going to produce the waste material such as ash and dust. These materials will cause various effects to the environment such ... -
Impedance study on Mg Sacrificial anode for soil corrosion protection
(Universiti Malaysia PerlisSchools of Materials Engineering, 2008-05)Sacrificial anode is one of the methods that usually applied in soil corrosion protection especially magnesium (Mg) based anode. This study is focuses on high-potential Mg anode and pure Mg anode. The value of open-circuit ... -
Influence of chemical treatment on surface morphology of natural fiber
(Universiti Malaysia PerlisSchools of Materials Engineering, 2008-04)The interest in using natural fibers in composites has increased in recent years due their lightweight, non-abrasive, combustible, non-toxic, low cost and biodegradable properties. However, lack of good interfacial adhesion, ... -
Influence of grain size on isothermal oxidation of Fe-33Ni-19Cr alloy
(Universiti Malaysia Perlis (UniMAP)School of Materials Engineering, 2016-05)This research study describes the influence of grain size on isothermal oxidation of Fe- 33Ni-19Cr alloy. The Fe-33Ni-19Cr alloy plate was cut into desired dimension and undergone heat treatment of 3 different temperatures ... -
Influence of H2 SO4 solution on formation of porous AAO thin film
(Universiti Malaysia PerlisSchool of Materials Engineering, 2008-04)The fabrication of self-ordered anodic aluminum oxide (AAO) by anodization of Al foils and pure aluminum in sulfuric acid solution was investigated. The influences of anodizing variables, such as applied voltage, the ... -
Influence of H2C204 solution on formation of Porous AAO thin film
(Universiti Malaysia PerlisSchool of Material Engineering, 2008-04)The anodizing of aluminium has been investigated with the aim to realize nano-porous structures and nano-porous oxides for use as nano-templates. Before undergoing electrochemical oxidation, aluminium samples were cleaned ... -
Influence of Nitric acid and RE-OA-H3PO4 acid solution on formation of porous anodic aluminium oxide (AAO) thin film
(Universiti Malaysia PerlisSchool of Materials Engineering, 2008-04)Anodizing is very suitable process in formation of porous AAO thin film. By controlling the anodizing parameters such as voltage, time, temperature and acid solution during the anodizing process, a layer of AAO thin film ... -
Influence of surface treatment on the properties of high density polyethylene composites filled with palm kernel shell
(Universiti Malaysia Perlis (UniMAP)School of Materials Engineering, 2016-06)The high density polyethylene (HDPE) composites filled with palm kernel shell (PKS) were prepared using Z-blade mixer at processing temperature 190 ˚C and rotor speed 30 rpm. The effect of filler loading of PKS on ... -
Influence of temperature on reduction behaviour of iron ore-coal composite pellets
(Universiti Malaysia Perlis (UniMAP)School of Materials Engineering, 2016-06)This present study investigated about influence of temperature on reduction behaviour in iron ore and coal composite pellet. The objectives about this research were to analyse the reduction behaviour between iron ore and ... -
The influence of welding parameters and corrosive environment on the joint strength of resistance spot-welded mild steel sheets
(Universiti Malaysia PerlisSchool of Materials Engineering, 2008-04)In the present work, mild steel sheets consisting two batches were welded by resistance spot welding at different welding parameters and exposed under different environments. The 5% sodium chloride brine was used in the ... -
Influences of Phosphoric acid (H3PO4) solution on formation of Porous Anodic Aluminum Oxide (AAO) thin film
(Universiti Malaysia PerlisSchool of Materials Engineering, 2008-04)The main objective of this study is to analyze the effect of anodizing parameter focusing on anodizing voltage and phosphoric acid (H3PO4) concentration on the formation of porous anodic aluminum oxide (AAO) film. The ... -
Investigation of reaction temperature on the synthesis of graphene
(Universiti Malaysia Perlis (UniMAP)School of Materials Engineering, 2016-06)Graphene, two-dimensional sheet of carbon atoms has recently gained attention as some of its properties are promising for many applications. To bring graphene to the production level, synthesis methods are needed for its ... -
Investigation on thermal-mechanical degradation, rheological and mechanical properties of polypropylene-ethylene/silica composites
(Universiti Malaysia Perlis (UniMAP)School of Materials Engineering, 2016-06)The thermal-mechanical degradation resulting from heated two roll mill of silica filled polypropylene-ethylene (PPE) composites was investigated. The influence of processing temperature and silica loading was studied and ...