Browsing School of Materials Engineering (FYP) by Title
Now showing items 211-230 of 256
-
The study of ultrasonic wave propagation in welded austenitic stainless steel
(Universiti Malaysia PerlisSchool of Materials Engineering, 2008-04)The propagation of ultrasonic waves in welded austenitic stainless steel (304 SS) is examined. Significant variations of welded samples have been observed for different wave propagation directions. The welded samples for ... -
A study of using grass (Malaysian foxtail) fiber in paper making
(Universiti Malaysia PerlisSchool of Materials Engineering, 2008-04)A various types of grasses can be found in Malaysia. A few of grass can be used for animal food and as a covering the earth only. More than that, grasses always abandoned or fired. Foxtail grass, also known as ‘rumput bulu’ ... -
A study on corrosion behavior of Mild Steel in Granulated Blast Furnace (GBFS) fly ash geopolymer
(Universiti Malaysia Perlis (UniMAP), 2017-04)This research presents the corrosion behavior of mild steel embedded in geopolymer paste that produced by the reaction of fly ash and slag with an alkaline activators (NaOH molarity of 12 M, Na2SiO3/NaOH ratio of 2.5). ... -
Study on different sintering temperature on the composite ferum and cobalt reinforced with silicon carbide
(Universiti Malaysia PerlisSchool of Materials Engineering, 2008-04)Particulate-reinforced metal matrix composites (MMCs) have become more attractive to researches because of the problem of anisotropy and high cost of fibre reinforced MMCs. This study involves the fabrication of MMCs with ... -
Study on differentiation of tensile and Ultrasonic modulus of Highway Guardrail
(Universiti Malaysia PerlisSchool of Materials Engineering, 2008-03)The aim of this study is to determine the differentiation of Young’s modulus between conventional tensile technique and ultrasonic technique. Highway guardrail used as a sample in this study was courtesy by highway concession. ... -
Study on mechanical characterization plastics waste as coarse aggregate (PWCA) for concrete
(Universiti Malaysia PerlisSchool of Materials Engineering, 2008-05)Quantities of plastics waste have been increased these recent years due to the boost in industrialization and the rapid improvement in the standard of living. In Malaysia, most of plastics waste is abandoned and not ... -
Study on properties of sugarcane bagasse fiber filled Polypropylene composites
(Universiti Malaysia PerlisSchool of Materials Engineering, 2008-05)Bagasse fiber is a residue of a sugarcane milling process. In this research, bagasse fiber has been used as filler in polypropylene (PP) resin to open up further possibilities in waste management. The chemical treatment ... -
Study on static mechanical properties of Linear Low Density Polyethylene (LLDPE) reinforced rice husk (RH)/Sawdust Hybrid composite under various loading rates
(Universiti Malaysia Perlis (UniMAP)School of Materials Engineering, 2016-06)Strain rate effect is a vital factor that seriously affects the mechanical properties of a material under loading conditions. Hence, in this study, static mechanical properties of linear low density polyethylene (LLDPE) ... -
Study on the effect of reinforcement particle size parameter on Aluminum metal matrix composite reinforced with Alumina particles
(Universiti Malaysia PerlisSchool of Materials Engineering, 2008-04)The physical and mechanical properties of different particle sizes of alumina reinforce in aluminum metal matrix composite were investigated. In general, P/M aluminum matrix composites exhibit good levels of mechanical ... -
A study on the effect of temperature on morphology of precipitate dolomite
(Universiti Malaysia Perlis (UniMAP)School of Materials Engineering, 2016-05)The main objective of this project is to study the effect of temperature on morphology of precipitate calcium magnesium carbonate. This examine involves the utility of different temperature for carbonation process as a way ... -
Study on the microstructure and properties of Al-Zn alloy fabricated by sand casting process
(Universiti Malaysia Perlis (UniMAP), 2017-06)In this research, the microstructure and properties of aluminium zinc (Al-Zn) alloy with different weight percentage have been studied. This project were carried out by sand casting process. The as-cast sample were prepared ... -
A study on the purification of Limestone
(Universiti Malaysia Perlis (UniMAP)School of Materials Engineering, 2016-06)This research study focused on the purification of limestone by multiple reprecipitation. This study involves the application of different temperature for carbonation process as to observe the reactiveness of particles ... -
The study on Ultra-fine WC-6 wt.%Co for producing cutting tool inserts
(Universiti Malaysia PerlisSchool of Materials Engineering, 2008-04)WC–Co cutting tools insert can be manufactured by controlling liquid phase migration or liquid redistribution during liquid phase sintering. In this study, the effect of temperature on mechanical properties has been studied. ... -
Study the effect of replacement of fly ashon ordinary portland cement
(Universiti Malaysia Perlis (UniMAP)School of Materials Engineering, 2016-05)The replacement of fly ash in Ordinary Portland cement have been conducted to measure the strength of concrete in different ratio between fly ash and cement. This research is involved three stage like Raw material analysis, ... -
Surface modification of low carbon steel and alloy steel by boriding diffusion coating
(Universiti Malaysia Perlis (UniMAP)School of Materials Engineering, 2016-06)In this study, Inconel 718 and mild steel rods with diameter 20 mm were undergo boriding diffusion coating by using pack cementation method at 900°C for 30, 60 and 90 minutes. This surface modification was conducted to ... -
Synthesis and characterisation of Niobium doped Yttria stabilised Zirconia
(Universiti Malaysia Perlis (UniMAP)School of Materials Engineering, 2016-05)Nb-8YSZ pellets were produced by two different methods – solid state (SS) processing and sol-gel (SG) synthesis, varying the content of Nb for each of them (0 –1.5% Nb). The Nb-8YSZ pellets were sintered at 1550°C, and ... -
Synthesis and characterisation of SiC nanomaterials from reaction of palm kernel shell and silica
(Universiti Malaysia Perlis (UniMAP)School of Materials Engineering, 2016-06)Silicon carbide (SiC) is one of the non-oxide ceramic materials that are widely developed due to its superior properties. Typically, SiC nanomaterials are synthesised by using high purity of silicon react with high purity ... -
Synthesis and characterization of alumina nanoparticles by using a sol gel method
(Universiti Malaysia Perlis (UniMAP), 2017-06)Alumina (Al2O3) nanoparticles were successfully synthesized via sol gel method at different sintering temperature using aluminum nitrate and citric acid with molar ratio 0.5 C/N. The alumina nanoparticles were characterized ... -
Synthesis and characterization of biomimetic of Zinc Oxide
(Universiti Malaysia Perlis (UniMAP), 2017-06)This research explores the preparation and characterization of zinc oxide catalyst prepared by using mint and pine leaves as template respectively and investigation of its catalytic activity for the photoreduction of Fe3+ ... -
Synthesis and characterization of biomimetic titanium dioxide
(Universiti Malaysia Perlis (UniMAP), 2017-06)Synthesis of titanium dioxide has become popular nowadays. Biomimetic method has been demonstrated to be very effective ways for synthesizing the titanium dioxide as it low cost and environmental friendly. In this research, ...