Browsing School of Materials Engineering (FYP) by Title
Now showing items 111-130 of 256
-
Electroplating copper on aluminium alloy
(Universiti Malaysia Perlis (UniMAP)School of Materials Engineering, 2016-06)Electroplating of copper on aluminium alloy surface by using copper sulphate solution as an electrolyte solution. This study was done to analyse the influence of voltage (5V-25V) on electroplating of copper on aluminium ... -
Establishment of material selection and design consideration for bulletproof vest
(Universiti Malaysia Perlis (UniMAP)School of Materials Engineering, 2015-11)A bulletproof vest is a protective clothing that is worn on the body of the wearer. Basically a bulletproof vest is used to absorb or disperse the impact and reduce or prevent the penetration of projectiles and shrapnel ... -
Ethylene Vinyl Acetate (EVA) nanocomposites incorporation hybrid nanofillers for Biomedical applications
(Universiti Malaysia Perlis (UniMAP)School of Materials Engineering, 2016-06)Ethyl vinyl acetate (EVA) copolymers possess exceptional mechanical properties, barrier properties and biocompatibility, thus they are potentially to become as materials for biomedical applications. In this research, ... -
Extracted silica from Cymbopogancitratus (lemon grass) as a novel silica in vulcanized natural rubber latex prepared
(Universiti Malaysia Perlis (UniMAP)School of Material Engineering, 2016-06)Extracted silica from cymbopogancitratus (lemongrass) was used as novel filler for vulcanized natural rubber latex. Whereas silica sand and titanium dioxide was chosen for as comparison filler with extracted filler. In ... -
Extraction of Copper from Aqueous Sulfate medium using microcapsule coated with Cyanex 301
(Universiti Malaysia PerlisSchool of Materials Engineering, 2008-03)The copper extraction with the microcapsules containing Cyanex 301 which prepared by solvent evaporation method was study. Gum arabic as dispersion stabilizer and dichloromethane as solvent are used in microcapsules ... -
Fabrication and characterization of Ceramic Porcelain tiles
(Universiti Malaysia PerlisSchool of Materials Engineering, 2008-04)Fabrication of ceramic tiles requires detailed attention on the processing parameters such as raw material size and weight percentage, forming and drying process, and sintering temperature. The scope of the project is to ... -
Fabrication of Al-based metallic glasses by mechanical alloying and hot consolidation
(Universiti Malaysia Perlis (UniMAP), 2017-04)This project is related to fabrication of aluminium based amorphous metallic glasses. Elemental powder of aluminium, copper and nickel were used for the purposed mentioned. The element powders with nominal composition ... -
Fabrication of graded Porous Hydroxyapatite by using coconut fibre
(Universiti Malaysia PerlisSchool of Materials Engineering, 2008-04)This study was carried out to develop sample hydorxyapatite (HA) cylindrical with have porous in particular part for example his external layers has solid part while on the inside it exist porous. Further it can make as ... -
The fabrication of heparin imprinted fiber membrane using electrospinning
(Universiti Malaysia Perlis (UniMAP), 2016-06)The studies of the fabrication of Heparin Imprinted Fiber membrane using Electrospinning was presented and investigated. This studies is about electrospinning method use to produce membrane from Polyvinylidene fluoride ... -
Fabrication of Photoanode and its performance in Photocatalytic fuel cell
(Universiti Malaysia Perlis (UniMAP)School of Materials Engineering, 2016-05)Photocatalytic fuel cell system (PFC) is a new technology for simultaneous organic wastewater treatment and electricity generation. Different composition of photoanode and different layers of photoanode were fabricated ... -
The fabrication of porcelain ceramic via Wet casting technique
(Universiti Malaysia PerlisSchool of Materials Engineering, 2008-04)Porcelain ceramic which composed of ball clay, kaolin, silica and feldspar were fabricated and investigated to study the effect of sintering temperature on mechanical properties. Two types of parameter were used in these ... -
Failure analysis simulation of polymeric foam composite using ANSYS 15.0
(Universiti Malaysia Perlis (UniMAP)School of Materials Engineering, 2016-05)Kajian ini menerangkan kesan multi tiubnano berdinding karbon (MWCNTs) ke atas sifat, terutama sifat-sifat busa poliuretana tegar (PU) dihasilkan daripada polyol minyak sawit (POP)dan metilena diphenyl diisosianat (MDI). ... -
High temperature performance of foamed fly ash geopolymers
(Universiti Malaysia Perlis (UniMAP)School of Materials Engineering, 2016-06)Nowadays, the environmental sustainability becomes a big issues for an industry when they are going to produce the waste material such as ash and dust. These materials will cause various effects to the environment such ... -
Impedance study on Mg Sacrificial anode for soil corrosion protection
(Universiti Malaysia PerlisSchools of Materials Engineering, 2008-05)Sacrificial anode is one of the methods that usually applied in soil corrosion protection especially magnesium (Mg) based anode. This study is focuses on high-potential Mg anode and pure Mg anode. The value of open-circuit ... -
Influence of chemical treatment on surface morphology of natural fiber
(Universiti Malaysia PerlisSchools of Materials Engineering, 2008-04)The interest in using natural fibers in composites has increased in recent years due their lightweight, non-abrasive, combustible, non-toxic, low cost and biodegradable properties. However, lack of good interfacial adhesion, ... -
Influence of grain size on isothermal oxidation of Fe-33Ni-19Cr alloy
(Universiti Malaysia Perlis (UniMAP)School of Materials Engineering, 2016-05)This research study describes the influence of grain size on isothermal oxidation of Fe- 33Ni-19Cr alloy. The Fe-33Ni-19Cr alloy plate was cut into desired dimension and undergone heat treatment of 3 different temperatures ... -
Influence of H2 SO4 solution on formation of porous AAO thin film
(Universiti Malaysia PerlisSchool of Materials Engineering, 2008-04)The fabrication of self-ordered anodic aluminum oxide (AAO) by anodization of Al foils and pure aluminum in sulfuric acid solution was investigated. The influences of anodizing variables, such as applied voltage, the ... -
Influence of H2C204 solution on formation of Porous AAO thin film
(Universiti Malaysia PerlisSchool of Material Engineering, 2008-04)The anodizing of aluminium has been investigated with the aim to realize nano-porous structures and nano-porous oxides for use as nano-templates. Before undergoing electrochemical oxidation, aluminium samples were cleaned ... -
Influence of Nitric acid and RE-OA-H3PO4 acid solution on formation of porous anodic aluminium oxide (AAO) thin film
(Universiti Malaysia PerlisSchool of Materials Engineering, 2008-04)Anodizing is very suitable process in formation of porous AAO thin film. By controlling the anodizing parameters such as voltage, time, temperature and acid solution during the anodizing process, a layer of AAO thin film ... -
Influence of surface treatment on the properties of high density polyethylene composites filled with palm kernel shell
(Universiti Malaysia Perlis (UniMAP)School of Materials Engineering, 2016-06)The high density polyethylene (HDPE) composites filled with palm kernel shell (PKS) were prepared using Z-blade mixer at processing temperature 190 ˚C and rotor speed 30 rpm. The effect of filler loading of PKS on ...