Search
Now showing items 21-30 of 330
Preparation of Solid Phase material containing Cyanex 302 for extraction of antimony
(Universiti Malaysia Perlis, 2008-05)
This project aim to study the characteristic of novel solid phase material which developed using Polymer Inclusion Membrane (PIM) preparation technique and the effect of ariables such as temperature, weight of solid phase ...
Fabrication and characterization of Ceramic Porcelain tiles
(Universiti Malaysia Perlis, 2008-04)
Fabrication of ceramic tiles requires detailed attention on the processing parameters such as raw material size and weight percentage, forming and drying process, and sintering temperature. The scope of the project is to ...
Design and analysis CMOS Cascode amplifier
(Universiti Malaysia Perlis, 2008-03)
The design of CMOS cascode amplier is presented which it will constructed with the circuit of current mirror and two transistor are placed in cascode topology. The design need to achieve the value that will meet the ...
PIC based smart lamp control and monitoring unit in airport
(Universiti Malaysia Perlis, 2008-04)
This project representing one product or the rule that easier in the implementation of the
switching system that was met in any big buildings like the airport. This is built with made a microcontroller model PIC16F877A ...
Theoretical study, simulation & fabrication of Dry Oxidation in terms of SiO2 layer thickness, resistivity & surface roughness
(Universiti Malaysia Perlis, 2008-04)
Oxidation is a process used in wafer fabrication. The goal of oxidation is to grow
a high quality oxide layer on a silicon substrate. During oxidation a chemical reaction between the oxidants and the silicon atoms produces ...
Electrical characterization of 0.15µm CMOS Transistor using TSUPREM-4 and MEDICI
(Universiti Malaysia Perlis, 2008-04)
Physical and electrical characteristics of 0.153m Complementary Metal Oxide Semiconductor (CMOS) were studied. Fabrications of the devices were done by
TSUPREM-4 simulator and electrical characteristics extraction will ...
Study of acceleratin voltage influence the Conical structure during Electron Beam Induced Deposition (EBID)
(Universiti Malaysia Perlis, 2008-03)
Electron beam induced deposition (EBID) is a well established technique for highresolution
direct material deposition from the gas phase onto a substrate. A finely focused electron beam of a scanning electron microscope ...
Designs of harmonic filtering system for minimizing the harmonic effects and improve the power factor
(Universiti Malaysia Perlis, 2008-05)
Now a day, power quality is becomes more and more important issue. The whole Malaysia energy consumers concerned about the quality of energy they are using, and the consumers are enjoying with the outstanding performance ...
Design and development of Shredder machine for compost fertilizer production
(Universiti Malaysia Perlis, 2008-05)
Since years ago till now, the communities especially in Malaysia are not shows their interest in recycling activities and not get attention from them. For example, when we go to the market or any place that sell wet stuffs, ...
Design and analysis solar car chassis part
(Universiti Malaysia Perlis, 2008-05)
A solar car is a lightweight, low power vehicle designed and built with a single
purpose in mind – racing. They have limited seating (usually one, sometimes two people),
they have very little cargo capacity, and they can ...