Search
Now showing items 21-30 of 53
Thin film thickness and uniformity measurement for lab-on-chip based nanoelectrode biosensor development
(Trans Tech Publications, 2014)
One of the advantages of silicon substrate over other semiconductor substrate is the high temperature process capability of the silicon. In this work, silicon wafer is used for thermal processing which involves many high ...
Fabrication of silicon nanowires by electron beam lithography and thermal oxidation size reduction method
(Trans Tech Publications, 2014)
A simple method for the fabrication of silicon nanowires using Electron Beam Lithography (EBL) combined with thermal oxidation size reduction method is presented. EBL is used to define the initial silicon nanowires of ...
Reviewed immunosensor format using nanomaterial for tungro virus detection
(Trans Tech Publications, 2014)
Recently, nanomaterial based biosensor application has drawn a lot attention among researchers because of specialty to enhance the sensor signal for increasing the sensitivity for detecting and identification of pathogen, ...
Fabrication and characterization of IDE based sensor through conventional lithography method
(Trans Tech Publications, 2014)
This paper mainly illustrate regarding the fabrication process of IDE based sensor for bio-molecular detection process. Material that is utilized in this process is zinc oxide due to bio-compability and elevated electrical ...
Comparison study in consolidation of yttria reinforced iron-chromium composites using conventional and microwave sintering technique
(Trans Tech Publications, 2014)
This research is focused on studying the density and mechanical properties of iron-chromium composites consolidated by innovative rapid microwave sintering technology against conventionally sintered counterparts using slow ...
Surface tension analysis of cost-effective paraffin wax and water flow simulation for microfluidic device
(Trans Tech Publications, 2014)
In microfluidic devices, the most important aspect has to be considered for the manufacturing process is the material suitability and geometric design. Among the materials studied, paraffin wax has never been tested and ...
Analysis of capillary filling in micro channels for passive fluid dynamics in Nano lab on chip domain
(Trans Tech Publications, 2014)
A fluid dynamics in a micro channel for analytical chemistry and different aspects of this type of flow for specific application has remained a long-acting problem in the last two decades considering its numerus applications ...
Surface modification of titanium dioxide thin film for ss-DNA detection
(Trans Tech Publications, 2014)
This paper studies the Capacitance-Frequency of titanium dioxide (TiO₂) thin film-based interdigitated electrodes (IDEs) for ss-DNA immobilization. TiO₂ thin film was deposited on P-type silicon dioxide (SiO₂) (1 0 0) ...
Characterization of nanostructured heterojunction solar cells of CdS/Cd₂ₓ(CuIn)₁₋ₓS₂ grown by chemical spray Pyrolysis
(Trans Tech Publications Inc., 2014-04)
A nanostructured heterojunction of CdS/Cd2x(CuIn)1-xS2 with x=0.2 was prepared by chemical spray pyrolysis on ITO/glass substrate at 350 °C. The X-ray diffraction pattern obtained from CdS/Cd2x(CuIn)1-xS2 solar cell confirmed ...
Synthesis and film investigation of titania
(Trans Tech Publications, 2014)
Titania or titanium dioxide (TiO2) thin film has been synthesized via sol-gel method with monoethanolamine (MEA) as a catalyst. The mixing of titanium butoxide as a precursor, ethanol as a solvent and MEA were stirred using ...