Browsing Mohd Mustafa Al Bakri Abdullah, Prof. Dr. by Title

Now showing items 199-218 of 279

    • Potential of cassava root as a raw material for bio composite development 

      Nurul Husna, Baharuddin; Mazlan, Mohamed; Mohd Mustafa Al Bakri, Abdullah; Noorhafiza, Muhammad; Rozyanty, Rahman; Mohd Nazri, Omar; Mohd Hazim, Mohamad Amini; Mohammad Khairul Azhar, Abdul Razab; Zairi Ismael, Rizman (Asian Research Publishing Network (ARPN), 2016-05)
      In recent years, a lot of researches have done by domestic and foreign scholars to enhance and improve the development of man-made board production that based on natural fiber and agricultural residues. Due to a worldwide ...

    • Potential of marine clay as raw material in geopolymer composite 

      Mohammad Tamizi, Selimin; Mohd Mustafa Al Bakri, Abdullah; Kamarudin, Hussin, Brig. Jen. Datuk Prof. Dr.; Che Mohd Ruzaidi, Ghazali, Prof. Madya; Liyana, Jamaludin; Aeslina, Abdul Kadir, Dr. (Scientific.Net/Trans Tech Publications, 2012-12)
      In this research, marine clays has been studied its potential as a matrix composite materials that tend to be used as alternative materials to concrete. The study shows that marine clays which mixed with appropriate ...

    • Potential of starch nanocomposites for biomedical applications 

      Nurul Husna, Zakaria; Noorhafiza, Muhammad; Mohd Mustafa Al Bakri, Abdullah (IOP Publishing Ltd, 2017-06)
      In recent years, the development of biodegradable materials from renewable sources based on polymeric biomaterials have grown rapidly due to increase environmental concerns and the shortage of petroleum sources. In this ...

    • Potential of upgrading domestic biomass into a higher energy density via torrefaction process 

      M. Iqbal, A.; Zainal Alimuddin, Zainal Alauddin, Dr.; Mohd Mustafa Al-Bakri, Abdullah; Musalmah, Mazlan, Prof. Dr.; Shahril Nizam, Mohamed Soid; Mohd Nasir, Kassim (Trans Tech Publications, 2013)
      Torrefaction is a thermal treatment step in a relatively low temperature range of 240-300°C, which aims to produce a higher energy biomass in terms of low heating value (LHV) and light weight properties. Biomass in wood ...

    • Potential use of plastic waste as construction materials: recent progress and future prospect 

      Mohamad Anuar, Kamaruddin; Mohd Mustafa Al Bakri, Abdullah; M. H. Zawawi; M. R. R. A. Zainol (IOP Publishing Ltd, 2017-11)
      Plastic associates products based have been considered as the world most consumer packaging solution. However, substantial quantities of plastic consumption have led to exponential increase of plastic derived waste. Recycling ...

    • Preliminary study on compressive strength of modified Polystyrene (MPS) as lightweight aggregate 

      Fetra Venny Riza, Z; Mohd Mustafa Al Bakri, Abdullah; Khairul Nizar, Ismail; Che Mohd Ruzaidi, Ghazali; Mohammad Tamizi, Selimin (Universiti Malaysia Perlis, 2008-03-15)
      This research investigates the possibility of making polystyrene as lightweight aggregate. Low density is the advantage of polystyrene. Waste polystyrene foam is modified and sintered in the furnace at the temperatures ...

    • Preliminary study on concrete with Polystrene waste coarse aggregate 

      Mohd Mustafa Al Bakri, Abdullah; Che Mohd Ruzaidi, Ghazali; Norazian, Mohd Noor; Kamarudin, Hussin; Abu Bakar, Mohamad Diah; Mohd Tajuddin, Mohd Idris (2007)
      Polystrene wastes are becoming a major environment concern; due to its large production quantities and its non-biodegrable nature. Provided that the high molecular-weight material can be broken down into useful low ...

    • Preliminary study on concrete with polystyrene waste coarse aggregate 

      Mohd Mustafa, Al Bakri Abdullah; Che Mohd Ruzaidi, Ghazali; Norazian, Mohamed Noor; Kamarudin, Hussin; Abu Bakar, Mohamad Diah; Mohd Tajuddin, Mohd Idris (Construction Industry Development Board, Malaysia (CIDB), Construction Research Institute of Malaysia (CREAM) & Universiti Teknologi MARA (UiTM), 2007-03-14)
      Polymer recycling has received a great deal of attention in this recent year. Presently, small percentage of polymer wastes in Malaysia has been under going the recycling process. This recycling process has typically been ...

    • Preparation of cyciopentyi trisiianoi siisesquioxanes - modified natural rubber (CpSSQ(OH)3 - ENR-50) composite hybrid in the presence of HCI acid 

      Rosniza, Hamzah; Mohamad, Abu Bakar, Prof.; Nik Noriman, Zulkepli, Dr.; Mohd Arif Anuar, Mohd Salleh; Mohd Mustafa Al-Bakri, Abdullah (Trans Tech Publications, 2013)
      A composite comprising cyclopentyl trisilanol siisesquioxanes (CpSSQ(OH)3) and 50% epoxidized natural rubber (ENR-50) was prepared at reflux temperature employed hydrochloric acid (HCl) as catalyst. HCl was found to be an ...

    • Preparation of heat treated Titanium Dioxide (TiO₂ ) nanoparticles for water purification 

      Araoyinbo, A. O.; Mohd Mustafa Al Bakri, Abdullah; Azmi, Rahmat; A. I., Azmi; Vizureanu, P.; Wan Mohd Faizal, Wan Abd Rahim (IOP Publishing Ltd, 2018-06)
      Photocatalysis using the semiconductor titanium dioxide (TiO₂) has proven to be a successful technology for waste water purification. The photocatalytic treatment is an alternative method for the removal of soluble organic ...

    • Process of magnetizing bulk amorphous alloys Fe₄₃₊ₓCo₂₉-ₓY₈B₂₀ (x= 0 or 5) 

      Nabialek, M.; Jeż, B.; Jeż, K.; Pietrusiewicz, P.; Błoch, K.; Gondro, J.; Mohd Mustafa Al Bakri, Abdullah; Sandu, A. V. (IOP Publishing Ltd, 2019-07)
      The paper presents the results of investigations of the structure and magnetic properties of Fe₄₃₊ₓCo₂₉₋ₓY₈B₂₀ bulk amorphous alloys (x = 0 or 5). Alloy samples were made using injection a liquid alloy into a copper mold. ...

    • Processing and characterization of calcined kaolin cement powder 

      Liew, Yun Ming; Kamarudin, Hussin, Brig. Jen. Dato' Prof. Dr.; Mohd Mustafa Al Bakri, Abdullah; Luqman, Musa, Dr.; Khairul Nizar, Ismail, Assoc. Prof. Dr.; Che Mohd Ruzaidi, Ghazali; Cheng, Yong Heah (Elsevier Ltd, 2012-05)
      Abstract This paper aimed at investigating the possibility of calcined kaolin to produce cement powder that could be an alternative to Portland cement by applying geopolymerization process. Cement paste was firstly made ...

    • The processing, characterization, and properties of fly ash based geopolymer concrete 

      Mohd Mustafa Al-Bakri, Abdullah; Kamarudin, Hussin, Brig. Jen. Dato' Prof. Dr.; Mohamed, Bnhussain, Prof. Dr.; Khairul Nizar, Ismail, Assoc. Prof. Dr.; Rafiza, Abdul Razak; Zarina, Yahya (Advanced Study Center Co. Ltd, 2012)
      In recent years, attempts to increase the utilization of fly ash as a replacement for ordinary Portland cement (OPC) in concrete have increased in significance. Geopolymer concrete does not need the presence of Portland ...

    • Program Menjana Jurutera Masa Depan I & II 

      Mohd Mustafa Al Bakri, Abdullah (Kolej Universiti Kejuruteraan Utara Malaysia, 2003-07)

    • Properties and behavior of Geopolymer Concrete Subjected to Explosive Air Blast Loading: a review 

      Nurul Aida, Mohd Mortar; Kamarudin, Hussin; Rafiza, Abdul Razak; Mohd Mustafa Al Bakri, Abdullah; Ahmad Humaizi, Hilmi; Andrei Victor, Sandu (EDP Sciences, 2017)
      The severe damage to civilian buildings, public area, jet aircraft impact and defense target under explosive blast loading can cause a huge property loss. Most of researcher discusses the topics on design the concrete ...

    • Properties of a New Insulation Material Glass Bubble in Geopolymer Concrete 

      Noor Fifinatasha, Shahedan; Mohd Mustafa Al Bakri, Abdullah; Norsuria, Mahmed; Kusbiantoro, Andri; Tammas-Williams, Sam; Li, Long-Yuan; Ikmal Hakem, Aziz; Vizureanu, Petrica; Wysłocki, Jerzy J.; Bloch, Katarzyna; Nabiałek, Marcin (MDPI AG, 2021-02)
      This paper details analytical research results into a novel geopolymer concrete embedded with glass bubble as its thermal insulating material, fly ash as its precursor material, and a combination of sodium hydroxide (NaOH) ...

    • Properties of fresh palm oil fuel ash based geopolymer material 

      Moslih Amer, Salih; Abang Abdullah, Abang Ali, Ir. Prof.; Ramazan, Demirboga; Mohd Mustafa Al-Bakri, Abdullah (American-Eurasian Network for Scientific Information (AENSI), 2013-10)
      In this paper, palm oil fuel ash (POFA) was used as the soul material to produce geopolymer binder. Sodium silicate mixed with sodium hydroxide was used as alkaline activator to activate the palm oil fuel ash. Activator ...

    • Properties of hooked steel fibers reinforced alkali activated material concrete 

      Meor Ahmad Faris, Meor Ahmad Tajudin; Mohd Mustafa Al Bakri, Abdullah; Khairul Nizar, Ismail; Ratnasamy, Muniandy; Aiman, Mahmad Nor; Ramadhansyah, Putra Jaya; Warid Wazien, Ahmad Zailani‬ (EDP Sciences, 2016)
      In this study, alkali activated material was produced by using Class F fly ash from Manjung power station, Lumut, Perak, Malaysia. Fly ash then was activated by alkaline activator which is consisting of sodium silicate ...

    • Properties of metakaolin geopolymeric binder 

      Liew, Yun Ming; Kamarudin, Hussin, Brig. Jen. Dato' Prof. Dr.; Mohd Mustafa Al Bakri, Abdullah; Mohamed, Bnhussain, Prof. Dr.; Luqman, Musa, Dr.; Khairul Nizar, Ismail, Assoc. Prof. Dr.; Che Mohd Ruzaidi, Ghazali, Prof. Madya; Heah, Cheng Yong (American Scientific Publishers, 2013-01)
      This paper investigates the physical and mechanical properties as well as the morphology study of the MK geopolymeric binder. Mixture of waterglass liquid and NaOH solution were used as the activator solution for the ...

    • Properties of modified polystyrene lightweight aggregate in concrete 

      R., Fetra Venny; Khairul Nizar, Ismail, Dr.; Mohd Mustafa Al Bakri, Abdullah (Universiti Malaysia Pahang, 2009-06-20)
      Several experiments were conducted to characterize the properties of modified polystyrene lightweight aggregate in concrete. Microstructure of modified polystyrene lightweight aggregate in concrete can be assessed by ...