Now showing items 1-20 of 186

    • Alkali activated blast-furnace slag cement: The opportunity to solve sustainable issues 

      Aimi Noorliyana, Hashim; Mohd Mustafa Al Bakri, Abdullah; Azira, M.N.; Noor Mariamadzliza, Mohd Nan; Kamrosni, Abdul Razak; Kamarudin, Hussin, Brig. Jen. Dato' Prof. Dr. (American-Eurasian Network for Scientific Information, 2013)
      This paper aimed at investigating the possibility of alkali activated blast-furnace slag (BFS) to produce cement powder that could be alternative to ordinary Portland cement. It was found that an alkali activated BFS ...
    • Alteration in the microstructure of fly ash geopolymer upon exposure to elevated temperatures 

      Omar A., Abdulkareem; Mohd Mustafa Al-Bakri, Abdullah; Kamarudin, Hussin, Brig. Jen. Dato' Prof. Dr.; Khairul Nizar, Ismail, Assoc. Prof. Dr. (Trans Tech Publications, 2013)
      This paper represents the mechanical and microstructure changes in geopolymeric material synthesized by the alkali activation of locally source fly ash at high temperatures of 400, 600 and 800 °C. The high compressive ...
    • Application of clay - based geopolymer in brick production: A review 

      Muhammad Faheem, Mohd Tahir; Mohd Mustafa Al-Bakri, Abdullah; Kamarudin, Hussin, Brig. Jen. Dato' Prof. Dr.; Mohamed, Bnhussain, Prof. Dr.; Che Mohd Ruzaidi, Ghazali, Prof. Madya; Mohd Izzat, Ahmad (Trans Tech Publications, 2013)
      This paper reviews and summarizes the current knowledge and application of clay as a geopolymer material in production of geopolymer brick. As we understand, the nature of source materials give a significant impact to the ...
    • Application of clay - based geopolymer in brick production: a review 

      Muhammad Faheem, Mohd Tahir; Mohd Mustafa Al Bakri, Abdullah; Kamarudin, Hussin; Mohammed, Binhussain; Che Mohd Ruzaidi, Ghazali; Mohd Izzat, Ahmad (Trans Tech Publications/Scientific.Net, 2012-12)
      This paper reviews and summarizes the current knowledge and application of clay as a geopolymer material in production of geopolymer brick. As we understand, the nature of source materials give a significant impact to the ...
    • Application of clay - based geopolymer in brick production: A review 

      Muhammad Faheem, Mohd Tahir; Mohd Mustafa Al Bakri, Abdullah; Kamarudin, Hussin, Brig. Jen. Dato' Prof. Dr.; Mohamed, Bnhussain, Prof. Dr.; Che Mohd Ruzaidi, Ghazali, Prof. Madya; Mohd Izzat, Ahmad (Trans Tech Publications Inc., 2013)
      This paper reviews and summarizes the current knowledge and application of clay as a geopolymer material in production of geopolymer brick. As we understand, the nature of source materials give a significant impact to the ...
    • Assessment of Functional and Dysfunctional on Implant Stability Measurement for Quality of Life 

      Norshahrizan, Nordin; Mohd Mustafa Al Bakri, Abdullah; Fauziah, Mat; Muhammad, Abdullah; Razli, Che Razak; Abdul Hamid, Adom (EDP Sciences, 2017)
      This study was conducted to investigate the effect of an implant wearer comprising among orthopedic patients as well as the use of implant dentistry in Northern Malaysia. A total of 100 questionnaires were distributed and ...
    • Behavior of CuPb12Sn6 Alloys subjected to Heat Treatments 

      Cristian Achiței, Dragoș; Georgiana Minciună, Mirabela; Mohd Mustafa Al Bakri, Abdullah; Victor, Sandu Andrei; Michal, Szota; Petrică, Vizureanu (EDP Sciences, 2016-10)
      The paper present the structural modifications induced by 3 heat treatments: homogenization, recrystallization and quenching, respecting the specific parameters of copper based alloys. The obtained modifications by heat ...
    • Bengkel Kepimpinan Majlis Perwakilan Pelajar KUKUM 

      Mohd Mustafa Al Bakri, Abdullah (Kolej Universiti Kejuruteraan Utara Malaysia, 2003-12)
    • Bonding strength characteristics of FA-based geopolymer paste as a repair material when applied on OPC substrate 

      Warid Wazien, Ahmad Zailani; Bouaissi, Aissa; Mohd Mustafa Al Bakri, Abdullah; Rafiza, Abd Razak; Yoriya, Sorachon; Mohd Arif Anuar, Mohd Salleh; Mohd Remy Rozainy, M. A. Z.; Hamzah, Fansuri (MDPI AG, 2020-05)
      This investigative study aims to study the mechanical and morphological properties of fly ash (FA)-based geopolymer paste as a repair material when applied on ordinary Portland cement (OPC) overlay concrete. The first ...
    • Calcined kaolin geopolymeric powder: Influence of water- to geopolymeric powder ratio 

      Liew, Yun Ming; Kamarudin, Hussin, Brig. Jen. Dato' Prof. Dr.; Mohd Mustafa Al Bakri, Abdullah; Binhussain, M.; Luqman, Musa, Dr.; Khairul Nizar, Ismail, Assoc. Prof. Dr.; cheng, Yong Heah (Trans Tech Publications, 2012-07)
      This paper describes the synthesis of calcined kaolin geopolymeric powder from the alkaline activation of calcined kaolin followed by solidification and pulverizing process. The geopolymeric powder was used by just adding ...
    • Ceramic Waste Concrete (CWC) 

      Mohd Mustafa Al Bakri, Abdullah; Che Mohd Ruzaidi, Ghazali, Assoc. Prof.; Norazian, Mohammed Noor; Norzaidi, Zainol (Kementerian Pengajian Tinggi Malaysia (KPTM), 2007-08-10)
    • Characterization of LUSI mud volcano as geopolymer raw material 

      Mohd Mustafa Al Bakri, Abdullah; Rafiza, Abdul Razak; Djwantoro, Hardjito, Dr.; Kamarudin, Hussin, Brig. Jen. Dato' Prof. Dr.; Khairul Nizar, Ismail, Assoc. Prof. Dr. (Trans Tech Publications, 2012)
      The mud of mud volcano samples were collected from an eruption site named 'LUSI' (Lumpur "mud" -Sidoarjo), East Java, Indonesia for characterization. Analysis showed that, the major constituents of mud are SiO 2 and Al 2O ...
    • Characterization of LUSI mud volcano as geopolymer raw material: A review 

      Rafiza, Abdul Razak; Mohd Mustafa Al-Bakri, Abdullah; Kamarudin, Hussin, Brig. Jen. Dato' Prof. Dr.; Djwantoro, Hardjito, Dr. Ir.; Khairul Nizar, Ismail, Assoc. Prof. Dr. (Universiti Malaysia Perlis (UniMAP), 2012-06-18)
      This paper summarizes the current knowledge about the potential of LUSI mud volcano, East Java, Indonesia as a raw material in geopolymer. Previous experimental study shows that the LUSI mud has a good performance when 5% ...
    • Chemical and physical characterization of boiler ash from palm oil industry waste for geopolymer composite 

      Zarina, Yahya; Mohd Mustafa, Al Bakri Abdullah; Kamarudin, Hussin; Khairul Nizar, Ismail; Andrei Victor, Sandu; Petricǎ, Vizureanu; Rafiza, Abdul Razak (Syscom 18 SRL/ SC BIBLIOTECA CHIMIEI SA, 2013-12)
      The characterizations of boiler ash waste from waste of palm oil industry were performed. The boiler ash was obtained from the boiler in the palm oil processing factory. The chemical and physical characterization has been ...
    • Chemical reactions in the geopolymerisation process using fly ash-based geopolymer: A review 

      Mohd Mustafa Al Bakri, Abdullah; Kamarudin, Hussin; Mohammed Amjad, Hussain; Khairul Nizar, Ismail; Rafiza, Abdul Razak; Mohd Izzat, Ahmad (American-Eurasian Network for Scientific Information (AENSI Publisher), 2011-07)
      The development of our world, demanding the power supply which is produced by combustion of coal. Unfortunately, the million of tons of fly ash and related-products have been generated. To overcome these problems, fly ash ...
    • Compaction optimization of Sn-Cu-Si3N4via powder metallurgy route for composite solder fabrication 

      Muhamad Hafiz, Zan @ Hazizi; Mohd Arif Anuar, Mohd Salleh; Zainal Arifin, Ahmad, Prof.; Mohd Mustafa Al-Bakri, Abdullah; Alida, Abdullah; Kamarudin, Hussin, Brig. Jen. Dato' Prof. Dr. (Trans Tech Publications, 2013)
      The aim of this study was to optimize the compaction process of a composite solder fabricated via powder metallurgy route, before details study were conducted in the next stage. Powder of Sn, Cu and Si3N4 were carefully ...
    • A comparative study of solder properties of Sn-0.7Cu lead-free solder fabricated via the powder metallurgy and casting methods 

      Mohd Arif Anuar, Mohd Salleh; Mohd Mustafa Al Bakri, Abdullah; Sandu, Andrei Victor; Norainiza, Saud; Kamarudin, Hussin, Brig. Jen. Dato' Prof. Dr.; McDonald, Stuart D.; Nogita, Kazuhiro (Syscom 18 SRL, 2013-07)
      The properties of Sn-0.7Cu solder bulk prepared via the powder metallurgy (PM) method were investigated and compared with solder bulk fabricated through casting. Distinct microstructures were observed in both PM and casting ...
    • Comparative study on thermal, compressive, and wear properties of palm slag brake pad composite with other fillers 

      Che Mohd Ruzaidi, Ghazali, Assoc. Prof.; Kamarudin, Hussin, Brig. Jen. Dato' Prof. Dr.; Shamsul, Baharin Jamaludin, Prof. Dr.; Mohd Mustafa Al Bakri, Abdullah (Trans Tech Publications, 2011)
      The attractive performance-to-cost ratio associated with the incorporation of waste material in composite formulations used to produce brake pads has stimulated the idea of exploring the possible incorporation of additional ...
    • The comparison between four PLCC packages and eight PLCC packages in personal computer (PC) using computational fluid dynamic (CFD), fluent software™ using epoxy moulding compound material (EMC) 

      Mazlan, Mohamed; A. Rahim; Iqbal, M. A.; Mohd Mustafa Al Bakri, Abdullah; Wan Yusra Hannanah, Wan Abdul Razak; Mohd Sukhairi, Mat Rasat (Trans Tech Publications, 2013)
      The paper present the three dimensional numerical analysis of heat and fluid flow through Plastic Leaded Chip Carrier (PLCC) packages in inline orientation horizontally mounted on a printed circuit board in a wind tunnel ...
    • Comparison of geopolymer fly ash and ordinary Portland cement to the strength of concrete 

      Mohd Mustafa Al Bakri, Abdullah; Kamarudin, Hussin, Brig. Jen. Dato' Prof. Dr.; Mohamed, Bnhussain, Prof. Dr.; Khairul Nizar, Ismail, Assoc. Prof. Dr.; Rafiza, Abdul Razak; Zarina, Yahya (American Scientific Publishers, 2013-12)
      The aim of this study is to evaluate the effect of various fly ash: aggregate ratios by using fly ash (FA) based geopolymer compared to ordinary Portland cement (OPC) on the compressive strength of concrete. The different ...