Browsing Mohd Mustafa Al Bakri Abdullah, Prof. Dr. by Title

Now showing items 106-125 of 277

    • General properties of kaolin geopolymers 

      Heah, Cheng Yong; Kamarudin, Hussin, Brig. Jen. Dato' Prof. Dr.; Mohd Mustafa Al-Bakri, Abdullah; Mohamed, Bnhussain, Prof. Dr.; Luqman, Musa, Dr.; Khairul Nizar, Ismail, Assoc. Prof. Dr.; Che Mohd Ruzaidi, Ghazali, Prof. Madya; Liew, Yun Ming (American Scientific Publishers, 2013-01)
      This paper reported the properties of kaolin geopolymers in term of the bulk density, compressive strength, qualitative observation and SEM analysis of the kaolin geopolymers. Kaolin geopolymers were synthesized through ...

    • Geopolymerization technology for soil stabilization application 

      Mohd Mustafa Al Bakri, Abdullah; Sharifah Zaliha, Syed Zuber; Kamarudin, Hussin, Brig. Jen. Dato' Prof. Dr.; Mohammed bin Hussain; Muhammad Faheem, Mohd Tahir; Fauziah, Ahmad; Norazian, Mohammed Nor; Noor Fifinatasha, Shahedan (Universiti Malaysia Perlis (UniMAP)Center of Excellent Geopolymer & Green Technology (CEGeoTech), 2014-05)
      • Treatment for soil stabilization • Easy and fast treatment process

    • Geopolymers and their uses: review 

      Nergis, Dumitru Doru Burduhos; Mohd Mustafa Al Bakri, Abdullah; Vizureanu, P.; Muhammad Faheem, Mohd Tahir (IOP Publishing Ltd, 2018-06)
      Outlining the past-present history of the study of alumino-silicate materials, it is well known that geopolymers are inorganic polymers obtained from chemical reaction, also known as geopolymerisation, between an alkaline ...

    • Graphene geopolymer hybrid: a review on mechanical properties and piezoelectric effect 

      Nuaim Siddiqi, Danial; Dewi Suriyani, Che Halin; Muhammad Mahyiddin, Ramli; Mohd Mustafa Al Bakri, Abdullah; Mohd Arif Anuar, Mohd Salleh; Siti S., Mat Isa; L. F., A. Talip; N. S., Mazlan (IOP Publishing Ltd, 2019-08)
      A review on graphene geopolymers hybrid is presented, focusing on the mechanical properties and piezoelectric effect. The method and way of mixing graphene with geopolymers are discussed, including form of graphene that ...

    • Halal based sourced EM for turbidity reducing in wastewater treatment 

      Zarina, Zakaria; Noorulnajwa Diyana, Yaacob; Mohd Mustafa Al-Bakri, Abdullah; Che Mohd Ruzaidi, Ghazali, Prof. Madya (Trans Tech Publications, 2014)
      Effective Microorganism (EM) technology was found as the credible solution to solve many environmental problems including wastewater issues. The EM which is in the form of EM mud ball was tested to be effectively used for ...

    • Hari Keluarga KUKUM '03 

      Mohd Mustafa Al Bakri, Abdullah (Kolej Universiti Kejuruteraan Utara Malaysia, 2004-03)

    • High Strength K-Brick: Rapid Set Brick 

      Mohd Mustafa, Al Bakri Abdullah; Mohammad Tamizi, Selimin; Che Mohd Ruzaidi, Ghazali, Assoc. Prof.; Kamarudin, Hussin, Prof. Dr.; Norazian, Mohamed Noor; Mohd Nasir, Ibrahim; Norzaidi, Zainol (School of Materials Engineering, 2008-01-09)

    • Hybrid mold: comparative study of rapid and hard tooling for injection molding application using Metal Epoxy Composite (MEC) 

      Radhwan, Hussin; Safian, Sharif; Nabiałek, Marcin; Shayfull Zamree, Abd Rahim; Mohd Tanwyn, Mohd Khushairi; Mohd Azlan, Suhaimi; Mohd Mustafa Al Bakri, Abdullah; Mohd Hazwan, Mohd Hanid; Wysłocki, Jerzy J.; Bloch, Katarzyna (MDPI AG, 2021-02)
      The mold-making industry is currently facing several challenges, including new competitors in the market as well as the increasing demand for a low volume of precision moldings. The purpose of this research is to appraise ...

    • Image analysis of surface porosity mortar containing processed spent bleaching earth 

      Wei Chong, Beng; Rokiah, Othman; Ramadhansyah, Putra Jaya; Shu Ing, Doh; Li, Xiaofeng; Mohd Haziman, Wan Ibrahim; Mohd Mustafa Al Bakri, Abdullah; Sandu, Andrei Victor; Płoszaj, Bartosz; Szmidla, Janusz; Stachowiak, Tomasz (MDPI AG, 2021-03-28)
      Image analysis techniques are gaining popularity in the studies of civil engineering materials. However, the current established image analysis methods often require advanced machinery and strict image acquisition procedures ...

    • In Vitro bioactivity study of thermoplastic Starch/Bentonite/Hydroxyapatite composites for biomedical applications 

      Nurul Husna, Zakaria; Noorhafiza, Muhammad; Mohd Mustafa Al Bakri, Abdullah; S. N. F., M. Noor (IOP Publishing Ltd, 2020-02)
      Potato starch composites film incorporating hybrid bentonite and hydroxyapatite (HA) were investigated as novel biomaterial for potential biomedical applications. The selected potato starch/bentonite composites were prepared ...

    • The influence of cure characteristics and crosslink density of virgin acrylonitrile butadiene rubber/recycled acrylonitrile butadiene rubber (vNBR/rNBR) blends 

      Muhammad Ridhwan, Jamalul Nasir; Nik Noriman, Zulkepli, Dr.; Hanafi, Ismail, Prof.; Mohd Mustafa Al Bakri, Abdullah; Rosniza, Hamzah (Trans Tech Publications, 2014)
      Cure characteristics and crosslink density of virgin acrylonitrile butadiene rubber/recycled acrylonitrile butadiene rubber (vNBR/rNBR) blends were studied. Three different size ranges of rNBR particles, i.e., 150 - 350 ...

    • The influence of curing periods on the compressive strength of fly ash-based geopolymer at different aging times 

      Omar A., Abdulkareem; Mohd Mustafa Al-Bakri, Abdullah; Kamarudin, Hussin, Brig. Jen. Dato' Prof. Dr.; Khairul Nizar, Ismail, Prof. Madya Dr. (Trans Tech Publications, 2012)
      The results of the current experimental investigation indicate the significant effect of the heating periods on the compressive strength of fly ash-based geopolymers prepared at different alkaline liquid content at both ...

    • Influence of dolomite on the mechanical properties of boiler ash geopolymer paste 

      Zarina, Yahya; Kamarudin, Hussin, Brig. Jen. Dato' Prof. Dr.; Mohd Mustafa Al-Bakri, Abdullah; Khairul Nizar, Ismail, Assoc. Prof. Dr.; Rafiza, Abdul Razak (Trans Tech Publications, 2014)
      The waste material from palm oil industry has been increasing since Malaysia was the world largest exported of palm oil mill. The waste such as palm fibers, nut shells, palm kernel and empty fruit bunches are the solid ...

    • Influence of kaolin geopolymer ceramic additions to the wettability and electrical properties of Sn-3.0Ag-0.5Cu (SAC305) lead free solder 

      Nur Syahirah, Mohamad Zaim; Mohd Arif Anuar, Mohd Salleh; Mohd Mustafa Al Bakri, Abdullah; Marliza, Mostapha; Romisuhani, Ahmad (IOP Publishing Ltd, 2019-12)
      The effect of kaolin geopolymer ceramic addition to the wettability and electrical resistivity of Sn-3.0Ag-0.5Cu (SAC305) lead free solder was successfully explored. Powder metallurgy with microwave sintering method was ...

    • Influence of kaolin in fly ash based geopolymer concrete: destructive and non-destructive testing 

      Zarina, Yahya; Mohd Mustafa Al Bakri, Abdullah; N. Mohd Ramli; Burduhos-Nergis, D. D.; Rafiza, Abd Razak (IOP Publishing Ltd, 2018-06)
      Development of geopolymer concrete is mainly to reduce the production of ordinary Portland cement (OPC) that adverse the natural effect. Fly ash is a by-product collected from electrical generating power plant which resulted ...

    • Influence of oxide molar ratios on kaolin geopolymers 

      Heah, Cheng Yong; Kamarudin, Hussin, Brig. Jen. Dato' Prof. Dr.; Mohd Mustafa Al-Bakri, Abdullah; Mohamed, Bnhussain, Prof. Dr.; Luqman, Musa, Dr.; Khairul Nizar, Ismail, Assoc. Prof. Dr.; Che Mohd Ruzaidi, Ghazali, Prof. Madya; Liew, Yun Ming (American Scientific Publishers, 2013-12)
      Oxide molar ratios are the main key parameter determining the performance of a kaolin geopolymers. The kaolin composition and various mixture proportions will lead to different oxide molar ratios in geopolymer system. In ...

    • The influence of pre-heated treatment to improve adhesion bond coating strength of fly ash based geopolymer ceramic 

      Liyana, Jamaludin; Mohd Mustafa Al Bakri, Abdullah; Kamarudin, Hussin; Aeslina, Abdul Kadir (IOP Publishing Ltd, 2018-06)
      The study focus on effect of pre-heated ceramic surface on the adhesion bond strength between geopolymer coating coating and ceramic substrates. Ceramic substrates was pre-heated at different temperature (400 °C, 600 °C, ...

    • Influence of solid-to-liquid ratio on properties of fly ash geopolymer ceramics 

      Romisuhani, Ahmad; Mohd Mustafa Al Bakri, Abdullah; Wan Mastura, Wan Ibrahim; Sandu, Andrei Victor; Warid Wazien, Ahmad Zailani; Sharun Nizam, Shahrun Nahar (IOP Publishing Ltd, 2019-08)
      Ceramics has come to be progressively very important in industry because of their exceptional mechanical and physical properties The motivation to develop fly ash geopolymer ceramics was to overcome the problem associated ...

    • Influence of solidification process on calcined kaolin geopolymeric powder 

      Liew, Yun Ming; Kamarudin, Hussin, Brig. Jen. Dato' Prof. Dr.; Mohd Mustafa Al Bakri, Abdullah; Binhussain, M.; Luqman, Musa, Dr.; Khairul Nizar, Ismail, Assoc. Prof. Dr.; Che Mohd Ruzaidi, Ghazali; Cheng, Yong Heah (Trans Tech Publications, 2012-02)
      This paper aims at investigating the influence of solidification condition on the processing of calcined kaolin geopolymeric powder. This is a new process developed using the geopolymerization process. Geopolymer slurry ...

    • Influence of solids-to-liquid and activator ratios on calcined kaolin cement powder 

      Kamarudin, Hussin, Brig. Jen. Dato' Prof. Dr.; Che Mohd Ruzaidi, Ghazali, Assoc. Prof.; Luqman, Musa, Dr.; Mohd Mustafa Al Bakri, Abdullah; Heah, Cheng Yong; Khairul Nizar, Ismail; Mohammed, Binhussain; Liew, YunMing (Elsevier BV, 2011)
      This paper summarizes the effect of activator ratio on the processing of cement powder. Geopolymer slurry was produced via alkaline activation of calcined kaolin. Once the geopolymer slurry solidified, it was crushed and ...