Search
Now showing items 1-10 of 23
Synthesis and characterization of electroless copper coated SiC particles
(Trans Tech Publications, 2013)
Silicon carbide reinforced copper matrix (Cu-SiCp) composites fabricated via the conventional powder metallurgy methods have inferior thermophysical properties due to the weak bonding between the copper matrix and the SiCp ...
Compaction optimization of Sn-Cu-Si3N4via powder metallurgy route for composite solder fabrication
(Trans Tech Publications, 2013)
The aim of this study was to optimize the compaction process of a composite solder fabricated via powder metallurgy route, before details study were conducted in the next stage. Powder of Sn, Cu and Si3N4 were carefully ...
Overview of pathogenic micro-organisms destruction in contaminated water by oxide photocatalysis
(Trans Tech Publications, 2013)
The titanium dioxide (TiO2) is a semiconductor oxide photocatalys, which is chemically and biologically inert but exhibits excellent photolytic activity in the ultraviolet (UV) region. Progress in photocatalytic water ...
Preparation of cyciopentyi trisiianoi siisesquioxanes - modified natural rubber (CpSSQ(OH)3 - ENR-50) composite hybrid in the presence of HCI acid
(Trans Tech Publications, 2013)
A composite comprising cyclopentyl trisilanol siisesquioxanes (CpSSQ(OH)3) and 50% epoxidized natural rubber (ENR-50) was prepared at reflux temperature employed hydrochloric acid (HCl) as catalyst. HCl was found to be an ...
Effects of cure characteristics, mechanical and morphological properties of styrene butadiene rubber/recycled chloroprene rubber (SBR/CRr) blends
(Revista De Materiale Plastice, 2013-09)
The effects of tensile and morphological properties of styrene butadiene rubber/virgin chloroprene rubber blends (SBR/CRv) and styrene butadiene rubber/recycled chloroprene rubber blends (SBR/CRr) were investigated. The ...
Characterization of Sn-3.5Ag-1.0Cu lead-free solder prepared via powder metallurgy method
(Scientific.Net, 2012-04-12)
The toxicity in the Sn-Pb solder has promoted the development of Pb-free solder in the electronics industries. Among the Pb-solders, the Sn-3.5Ag-1.0Cu solder is considered a potential replacement and being studied by many ...
FT-IR and morphology of different recycled acrylonitrile-butadiene rubber glove (NBRgr) size and its blend ratios of SBR/NBRr blends
(Trans Tech Publications, Switzerland, 2012-12)
Recycling rubber waste contributes to a cleaner environment by using indestructible rubber discards as well as lowering production costs as reclaimed rubber is cheaper than virgin or natural rubber. Therefore, in this ...
Study on the properties of oil palm trunk fiber (OPTF) in cement composite
(Trans Tech Publications, 2013)
Properties of oil palm trunk fiber reinforced cement composite were investigated in this study. Oil palm trunk fiber was used to improve the properties of cement composite. It was found that increasing in oil palm trunk ...
Mixing optimization of Sn-Cu-Si₃N₄ via powder metallurgy route for composite solder fabrication
(Trans Tech Publications, 2014)
The aim of this study was to optimize the mixing process of a composite solder fabricated via powder metallurgy route, before details study were conducted in the next stage. Powder of Sn, Cu and Si₃N₄ were carefully weighted, ...
Natural rubber/styrene butadiene rubber/recycled nitrile glove (NR/SBR/rNBRg) ternary blend: Curing characteristics and swelling test
(Trans Tech Publications, 2014)
Curing characteristics and swelling behavior of natural rubber/styrene butadiene rubber/recycled nitrile glove (NR/SBR/rNBRg) blends were investigated. Eleven composition ratio; 50/50/0, 50/40/10, 50/30/20, 50/20/30, ...