Search
Now showing items 1-8 of 8
Characterization of Sn-3.5Ag-1.0Cu lead-free solder prepared via powder metallurgy method
(Scientific.Net, 2012-04-12)
The toxicity in the Sn-Pb solder has promoted the development of Pb-free solder in the electronics industries. Among the Pb-solders, the Sn-3.5Ag-1.0Cu solder is considered a potential replacement and being studied by many ...
FT-IR and morphology of different recycled acrylonitrile-butadiene rubber glove (NBRgr) size and its blend ratios of SBR/NBRr blends
(Trans Tech Publications, Switzerland, 2012-12)
Recycling rubber waste contributes to a cleaner environment by using indestructible rubber discards as well as lowering production costs as reclaimed rubber is cheaper than virgin or natural rubber. Therefore, in this ...
Microstructure evolution of Sn-3.5Ag-1.0Cu-0.5Ni/Cu system lead free solder under long term thermal aging
(Scientific.Net, 2012-12)
Due to environmental concerns, lead-free solders were introduced in replacing the lead-based solders in microelectronics devices technology. Although there are many lead-free solder available, the Sn-Ag-Cu solder was ...
Research development of solder materials and its intermetallic compound (IMC) study
(Scientific.Net/Trans Tech Publications, 2012-12)
Nowadays, the formation and the subsequent growth of the intermetallic compounds (IMCs) and the development of new lead-free solder systems is a major issue in soldering. The excessive growth formation of intermetallic ...
Research advances of composite solder material fabricated via powder metallurgy route
(Scientific.Net/Trans Tech Publications, 2012-12)
Researches and studies on composite solder have been done by many researchers in an effort to develop viable lead-free solders which can replace the conventional lead-based solders as lead is considered as toxic. Solder ...
The effects of tensile and morphological properties of Styrene Butadiene Rubber/Recycled Chloroprene Rubber (SBR/CRr) blends
(Scientific.Net, 2012-12)
The effects of tensile and morphological properties of styrene butadiene rubber/virgin chloroprene rubber blends (SBR/CRv) and styrene butadiene rubber/recycled chloroprene rubber blends (SBR/CRr) were investigated. The ...
Mechanical properties of Sn-0.7Cu/Si 3N 4 lead-free composite solder
(Elsevier B.V., 2012-10)
The use of reinforcing high performance ceramic particulates in monolithic lead-free solder is one way to improve the service temperature and mechanical behavior of a solder joint. In this study, various compositions of ...
Intermetallic compound formation on solder alloy/cu-substrate interface using lead-free sn-0.7cu/recycled-aluminum composite solder
(Scientific.Net, 2012-12)
Feasibility of using recycled-Aluminum (re-Al) as reinforcement particulates in Sn-0.7Cu is assessed by powder technology method, whereby re-Al particulates are produced from discarded aluminum beverage cans. This paper ...