Search
Now showing items 51-60 of 63
Study of Deposition Time Influence the Conical Structure during Electron Beam Induced Deposition (EBID)
(Universiti Malaysia Perlis, 2008-04)
Atomic force microscopy (AFM) is now a well-established technique for the surface characterization and imaging of a variety of materials. In AFM the accuracy of data is often limited by the tip geometry and the effect on ...
Car Reverse Sensor with distance display
(Universiti Malaysia Perlis, 2008-03)
Car reverse sensor with distance display is a design to improve driver awareness in maneuvering reversed gear. The design also helps deaf person to benefit from today
technology. The distance displays fast enough to give ...
Vertical-Lateral Thermal Actuator for MEMS design
(Universiti Malaysia Perlis, 2008-04)
Compact vertical and lateral thermal actuator has been design and simulation. The process of the simulation is to apply the current so it can make the arms hot enough to bend the design towards the cold arms. This current ...
Study the effect of environmental noise on Infrared TX–RX Circuit Signals
(Universiti Malaysia Perlis, 2008-04)
Infrared wireless communications systems have been massively growing in the past few years. There has been a high priority needs include systems for small group communications, portable receivers, and portable transmitters. ...
Fan control and monitoring system using Visual Basic program
(Universiti Malaysia Perlis, 2008-04)
This thesis is about the usage of a system to control and monitor a fan or more for
certain kinds of operation and application in real life. This is including on how to control the fan speed manually or by using temperature ...
Study the basic Infrared TX-RX circuit design for robot
(Universiti Malaysia Perlis, 2008-04)
The usage of infrared waves nowadays is widely used and it develops very fast. The
characteristic of the infrared waves cause a lot of consumer creates many type of application for human usage. Many kind of technology and ...
MEMS Cantilever beam monitor
(Universiti Malaysia Perlis, 2008-04)
Three cantilever beam monitor has been designed using the same material and dimension. They are the center, left and right cantilever beam with their own contact pad. The center beam can be displaced to the right or left ...
CMOS Two Stage OP-AMP analysis and design
(Universiti Malaysia Perlis, 2008-03)
The design and analysis CMOS of Two Stage Operational Amplifier that presented has constructed with two basic amplifier which is diffential amplifier and single stage amplifier. The design need to achieve the value that ...
Simulation for forming Shallow Trench Isolation in the IC using TCAD tools
(Universiti Malaysia Perlis, 2008-04)
A simulation for forming shallow trench isolation (STI) in the integrated circuit
(IC) is introduced. Firstly, using the Taurus Workbench-tools, the first silicon oxide layer and a silicon nitride layer are formed ...
Fabrication and characterization of Barium Strontium Titanate (BA1-XSRXTIO3 BST) for heat sensor application
(Universiti Malaysia Perlis, 2008-04)
Ferroelectric Barium Strontium Titanate (BST) thin films were successfully prepared by wet chemical deposition or sol-gel method and characterized using SPA, AFM, and sensing properties. The BST thin film was fabricated ...