Search
Now showing items 21-30 of 63
Vertical electrostatic comb drive actuator for MEMS design
(Universiti Malaysia Perlis, 2008-04)
This report serves as a summary for project titled Vertical Electrostatic Comb-Drive
Actuator. A comb-finger structure is disclosed for use in optical switching applications. Large displacements of movable fingers were ...
Analysis the role of supply voltage and load capacitor in small-signal MOSFET amplifiers
(Universiti Malaysia Perlis, 2008-03)
The main objective of this project is to investigate the role of supply voltage and load capacitance in the performance of small-signal MOS amplifier with the PSpice simulation for the Common Source, Common Gate and Common ...
Low Power Multiplier Accumulator (MAC) unit using Sleepy Stack technique
(Universiti Malaysia Perlis, 2008-05)
The main objective of this project is to provide new low power solutions for Very
Large Scale Integration (VLSI) designers. Especially, the focus is on leakage power
reduction. In this project, a novel circuit structure ...
Coherent effect on LOCOS and STI technique for 0.18 µm CMOS technology using Taurus Workbench
(Universiti Malaysia Perlis, 2008-04)
LOCOS (Local Oxidation of Silicon) and STI (Shallow Trench Isolation) are two isolation techniques used in integrated circuit fabrication. Further device scaling using
LOCOS technique is no longer practical for technology ...
Design a current mirror using body driven technique
(Universiti Malaysia Perlis, 2008-04)
Current mirror or current source is a one of the key elements in analog circuit design. For high performance analog circuit applications, the accuracy and output impedance are the most important parameters to determine the ...
Design and analysis of Floating Point multiplier
(Universiti Malaysia Perlis, 2008-04)
The most important floating-point representation is defined in IEEE Standard 754, adopted in 1985. This standard was developed to facilitate the portability of programs from one processor to another and to encourage the ...
Study of aspect ratio performance on Silicon Oxide wet etching by using Profilometer, AFM and SEM
(Universiti Malaysia Perlis, 2008-03)
A study of aspect ratio performance on silicon oxide is developing to predict the
oxide profile on surface of wafer. The main focus of this project is to perform and
produce a high profile of silicon oxide under profiler ...
Single Crystal SiC Capacitive pressure sensor design and analysis using MEMS Pro L-Edit and Samcef Field & Oofelie software
(Universiti Malaysia Perlis, 2008-03)
Single crystal 3C-SiC capacitive pressure sensors are proposed for high-temperature sensing applications. SiC is an attractive material for harsh environment micromachined transducers due to its outstanding electrical, ...
Study of the effect of different Gases parameter in Dry Etching process on Etch Rate profile
(Universiti Malaysia Perlis, 2008-04)
The principal focus of this project is dry etching technique by using the Inductively
Couple Plasma-Reactive Ion Etching (ICP-RIE). An (ICP) system was chosen because of
its high plasma density and low cost relative to ...
Line follower robot
(Universiti Malaysia Perlis, 2008-04)
This project is to create a robot that will follow a black line on white surface with microcontroller PIC16F877A to control the robot movements. This project is divided into two parts that electronic system and software. ...