Show simple item record

dc.contributor.authorMohd. Nasir, Mat Saad
dc.contributor.authorNorshah Afizi, Shuaib
dc.contributor.authorShayfull Zamree, Abd. Rahim
dc.contributor.authorMohd. Fathullah, Ghazli @ Ghazali
dc.contributor.authorNooraizedfiza, Zainon
dc.date.accessioned2013-08-15T04:26:47Z
dc.date.available2013-08-15T04:26:47Z
dc.date.issued2012-03
dc.identifier.citationInternational Review of Mechanical Engineering, vol. 6(3), 2012, pages 372-378en_US
dc.identifier.issn1970-8734
dc.identifier.urihttp://www.praiseworthyprize.com/IREME-latest/IREME_vol_6_n_3.html
dc.identifier.urihttp://dspace.unimap.edu.my/123456789/27449
dc.descriptionLink to publisher's homepage at http://www.praiseworthyprize.comen_US
dc.description.abstractThe parameters setting of process conditions in injection molding process is very importance to ensure the quality of molded components is controlled by minimizing of any defects such as warpage. Various injection parameters were examined and the best setting for different materials such as Polypropylene (PP), Acrylonitrile Butadiene Styrene (ABS) and Acrylonitrile Butadiene Styrene + Polycarbonate (ABS+PC) is identified which collectively affect the warpage on ultra thin plate plastic component using Taguchi and ANOVA methods. For this purpose, Autodesk Moldflow Insight (AMI) software was used to analyze the process parameters based L9 Orthogonal Array designed by Taguchi. The four parameters consist of Mold Temperature, Melt Temperature, Packing Pressure and Packing Time. The Signal to Noise (S/N) ratio method was applied in identifying the best parameter settings and to find the influence of these parameters on warpage issue. In this study, packing pressure was found to be the most significant parameter, regardless of types of material used.en_US
dc.language.isoenen_US
dc.publisherPraise Worthy Prize S.r.l.en_US
dc.subjectANOVAen_US
dc.subjectInjection moldingen_US
dc.subjectTaguchi methoden_US
dc.subjectUltra thin plateen_US
dc.subjectWarpageen_US
dc.titleWarpage optimization on ultra thin plate in three plate mold for PP, ABS & ABS+PC materials by using Taguchi methoden_US
dc.typeArticleen_US
dc.contributor.urlnasirsaad@unimap.edu.myen_US
dc.contributor.urlnorshahafizi@unimap.edu.myen_US
dc.contributor.urlshayfull@unimap.edu.myen_US
dc.contributor.urlfathullah@unimap.edu.myen_US
dc.contributor.urlnooraizedfiza@unimap.edu.myen_US


Files in this item

Thumbnail

This item appears in the following Collection(s)

Show simple item record