School of Materials Engineering (FYP): Recent submissions
Now showing items 201-220 of 256
-
Effect of particle size and milling process on the microstructure and thermal properties of Copper Silicon Carbide (CuSiC) composites for electronic packing application
(Universiti Malaysia PerlisSchool of Materials Engineering, 2008-03)Shrinking size and increasing functionality of IC device has induced serious thermal problem. Good thermal dissipation, light weight and easy-to-process material, such as CuSiC, is a highly potential heat spreader material ... -
Developing a mold technology module for freescale – study on effects of materials (compound properties) and molding process parameters on package moldability for QFP
(Universiti Malaysia PerlisSchool of Materials Engineering, 2008-05)In integrated circuit (IC) Packaging, there are several processes involved. The main processes for leaded package are wafer mount, wafer saw, die attach, wire bonding, molding, plating, singulation, trim and form. Molding ... -
Effect of new coupling agent based on Coconut oil on mechanical properties, swelling behavior and morphology of Silica filled Polypropylene composites
(Universiti Malaysia PerlisSchool of Materials Engineering, 2008-04)The suitability of using coconut oil coupling agent (COCA) as a new coupling agent in polypropylene (PP) composites was studied. As compariosn, maleic anhydride polypropylene (MAPP) was used in silica filled PP composites. ... -
Influence of Nitric acid and RE-OA-H3PO4 acid solution on formation of porous anodic aluminium oxide (AAO) thin film
(Universiti Malaysia PerlisSchool of Materials Engineering, 2008-04)Anodizing is very suitable process in formation of porous AAO thin film. By controlling the anodizing parameters such as voltage, time, temperature and acid solution during the anodizing process, a layer of AAO thin film ... -
The influence of welding parameters and corrosive environment on the joint strength of resistance spot-welded mild steel sheets
(Universiti Malaysia PerlisSchool of Materials Engineering, 2008-04)In the present work, mild steel sheets consisting two batches were welded by resistance spot welding at different welding parameters and exposed under different environments. The 5% sodium chloride brine was used in the ... -
Characterization and chemical oxidation of Nanoclay filled low density Polyethylene (LDPE) composites: the effect of Poly (acrylic acid)
(Universiti Malaysia PerlisSchool of Materials Engineering, 2008-04)The effects of poly(acrylic acid) (PAA) on the characterization and chemical oxidation of low density polyethylene (LDPE) and nanoclay were studied with a Differential scanning calorimetriy (DSC), Thermalgravimetry analysis ... -
Effect of Poly(Acrylic acid) on mechanical, morphology properties, X-Ray diffraction and water absorption of Nanoclay filled low density Polyethylene composites
(Universiti Malaysia PerlisSchool of Materials Engineering, 2008-04)Effects of poly(acrylic acid) (PAA) of nanoclay filled low density polyethylene (LDPE) composite on mechanical and characterization were studied using Universal Testing Machine (UTM), X-ray diffraction (XRD), Scanning ... -
Effect of milling speed on the iron mill scale particle size
(Universiti Malaysia PerlisSchool of Materials Engineering, 2008-04)Iron mill scale is a waste of steel processing and physically is flakes in shape. Milling is a process to reduce iron mill scale into a fine powder. The purpose of this study is to find the best milling speed to produce ... -
Analyze the quality of Tin-Aluminium binary alloy products concerning of its flowability, tensile strength, and hardness using various types of moulds
(Universiti Malaysia PerlisSchool of Materials Engineering, 2008-04)Tin-aluminium binary alloy is a type of alloy that improve the strength properties of tin. As we know, tin is a type of metal that randomly used in constructive application. So, combined with aluminium, a new type of alloy ... -
Analyze the quality Magnesium – aluminium binary alloy concerning its flowability, tensile strength and hardness with various types of moulds
(Universiti Malaysia PerlisSchool of Materials Engineering, 2008-03)This final year project is based on analyze the quality of magnesium – aluminium alloy products concerning of its flowability, tensile strength and hardness with various types of moulds. The mentioned method of molds is ... -
Effect of different treatment of sugarcane fiber on mechanical properties, morphology and swelling behavior of Low density Polyethylene (LDPE) composites
(Universiti Malaysia PerlisSchool of Materials Engineering, 2008-04)The sugarcane bagasse is a residue widely generated in high proportions in the agroindustry. In this research, the bagasse fiber has been used as reinforcing component for polyethylene. The chemical treatments using sodium ... -
Effect of Hygrothermal ageing on mechanical properties, swelling behavior and morphology of wood powder filled Low-density Polyethylene (LDPE)
(Universiti Malaysia PerlisSchool of Materials Engineering, 2008-05)Effect of hygrothermal ageing on mechanical properties, swelling behavior and morphology of wood powder filled LDPE with different filler loading and addition of coupling agent was investigated and compared with each other. ... -
Effect of filler loading of waste tire dust filled Acrylonitrile Butadiene Styrene composites
(Universiti Malaysia PerlisSchool of Materials Engineering, 2008-04)Waste tire dust is an organic material which can be used as filler in polymer composites. Effects of filler loading of the waste tire dust filled acrylonitrile butadiene styrene composites were studied. The blend ratios ... -
Preparation of Photoresponse n-TiO2 for hydrogen and oxygen evolution reactions in an electrochemical cell
(Universiti Malaysia PerlisSchool of Materials Engineering, 2008-03)Today, energy crisis triggered by depletion and pollution aspect of fossil fuels, has urged the need to search of clean and renewable energy, which can effectively substitute petroleum. The use of hydrogen as an environmentally ... -
Effect of grinding media size and shape on the iron mill scale particle and properties
(Universiti Malaysia PerlisSchool of Materials Engineering, 2008-05)A study was undertaken to determine how the effect of grinding media size and shape on the iron mill scale particle size and properties. Comparative tests were conducted using the two types of grinding media which are ... -
The effect of varied welding currents and cycles on thin sheet mild steel with heat treatment process for resistance spot weld
(Universiti Malaysia PerlisSchool of Materials Engineering, 2008-04)This report is about the experimental study on the effects of welding current and cycles on the weldability of resistance spot welded low carbon steel with heat treatment process. The heat treatment processes that been ... -
Studies on non-halogen flame retardant with low density polyethylene (LDPE) composites
(Universiti Malaysia PerlisSchool of Materials Engineering, 2008-04)Low density polyethylene (LDPE) was prepared with added non-halogen flame retardant and synergy. Blends with separate by four recipe in loading ranging from 0 to 60 wt % were prepared in Z blade mixer at 200°C and a motor ... -
A preliminary study on lightweight concrete made from Polystyrene waste
(Universiti Malaysia PerlisSchool of Materials Engineering, 2008-04)Increasing importance of environmental awareness around the world has drawn a great attention on polymer recycling. The recycling processes are commonly meant to reproduce other polymeric material for domestic use or energy ... -
Development and testing of new anode efficiency system for sacrificial anode
(Universiti Malaysia PerlisSchool of Materials Engineering, 2008-04)Magnesium based alloy is the most suitable material as sacrificial anodes for corrosion control in underground environment. Performance of control corrosion by anode was depend on efficiency to protect cathode from ... -
Basic study on oxidation treatment of rice husk
(Universiti Malaysia PerlisSchool of Materials Engineering, 2008-04)White husk ash suitable for use as reinforcement material for metal matrix composites. This rice husk based reinforcement material are material are prepared by first removing volatile constituent by heating the husks to a ...