School of Materials Engineering (FYP): Recent submissions
Now showing items 181-200 of 256
-
Conductive coating strategy for Magnesium alloy as a surface protection and reliability
(Universiti Malaysia PerlisSchool of Materials Engineering, 2008)The methods and technologies in various coatings for magnesium alloys are studied. The magnesium alloy used in this final year project is AZ91D, which is still in very early using stages in semiconductor industry. This ... -
Study on differentiation of tensile and Ultrasonic modulus of Highway Guardrail
(Universiti Malaysia PerlisSchool of Materials Engineering, 2008-03)The aim of this study is to determine the differentiation of Young’s modulus between conventional tensile technique and ultrasonic technique. Highway guardrail used as a sample in this study was courtesy by highway concession. ... -
A study of hardcoat anodizing on PM Al-Mg composite
(University Malaysia PerlisSchool of Materials Engineering, 2008-05)This research is being conducted to investigate an effect occurring on anodizing process on powder metallurgy Aluminium-Magnesium (PM Al-Mg) composite. Composite materials are fabricated by using powder metallurgy method ... -
The effect of Thermo-oxidative aging on the mechanical properties and FTIR analysis of sugarcane fibre filled Polypropylene composite
(Universiti Malaysia PerlisSchool of Materials Engineering, 2008-05)The effect of thermo-oxidative aging for PP/Sugarcane composite with COCA or MAPP coupling agent and without coupling agent were investigated. The results indicated that the presence of coupling agent MAPP increased the ... -
Preparation of Solid Phase material containing Cyanex 302 for extraction of antimony
(Universiti Malaysia PerlisSchool of Materials Engineering, 2008-05)This project aim to study the characteristic of novel solid phase material which developed using Polymer Inclusion Membrane (PIM) preparation technique and the effect of ariables such as temperature, weight of solid phase ... -
The effect of Barium Oxide to the properties of natural Hidroxyapatite
(Universiti Malaysia PerlisSchool of Materials Engineering, 2008-04)This project reports the mechanical properties and the microstructure of composite materials made of hydroxyapatite, obtained from natural cow bone, and BaO (1,2 and 5 wt.%), which were sintered at different temperatures ... -
Effect of solution treatment period on Magnesium anode in soil environment
(Universiti Malaysia PerlisSchool of Materials Engineering, 2008-03)The aim of this study is to determine the effect of heat treatment on the corrosion rate using immersion test in soil and backfill environment. Samples were heat treated at 300°C for 3, 6 and 9 hours in high temperature ... -
Fabrication and characterization of Ceramic Porcelain tiles
(Universiti Malaysia PerlisSchool of Materials Engineering, 2008-04)Fabrication of ceramic tiles requires detailed attention on the processing parameters such as raw material size and weight percentage, forming and drying process, and sintering temperature. The scope of the project is to ... -
Impedance study on Mg Sacrificial anode for soil corrosion protection
(Universiti Malaysia PerlisSchools of Materials Engineering, 2008-05)Sacrificial anode is one of the methods that usually applied in soil corrosion protection especially magnesium (Mg) based anode. This study is focuses on high-potential Mg anode and pure Mg anode. The value of open-circuit ... -
Properties of oil palm flour filled Polypropylene composites
(Universiti Malaysia PerlisSchool of Materials Engineering, 2008-05)Composites of thermoplastic blend of polypropylene (PP) filled with oil palm flour (OPF) was prepared by Z-Blade Mixer at 180 ºC and rotor speed 50 rpm. In general, increased of oil palm flour loading have increasing Young’s ... -
Corrosion study on welded mild steel in soil environment
(Universiti Malaysia PerlisSchool of Materials Engineering, 2008-03)This study was carried out to determine the corrosion behavior of welded mild steel in soil environment. The welding process was done by arc welding method at 70, 80, 90, 100 and 110 ampere. The corrosion behavior of welded ... -
Lattice Imperfections in Intermetallic Ti-Al alloys: an X-Ray Diffraction study of the microstructure by the Rietveld method
(Universiti Malaysia PerlisSchool of Materials Engineering, 2008-03)Microstructure in intermetallic Ti-Al alloys with compositions of Al= 45, 50, 55, and 60% in the homogenized bulk states has been extensively studied using Rietveld whole X-ray profile fitting technique, adopting the ... -
Characterization of Dolomite and its suitability as a raw material for soap production
(Universiti Malaysia PerlisSchool of Materials Engineering, 2008-04)This study is about characterization and soap production by using dolomite as a raw material. Calcium hydroxide and magnesium hydroxide also have been used in this study as a raw material. Soap are made from fats and oil ... -
The production of paper from sugarcane bagasse
(Universiti Malaysia PerlisSchool of Materials Engineering, 2008-04)The paper industry worldwide always faced a problem on lack of raw material due to deforestation. The agriculture waste material can be an alternative raw material to produce paper. For this study, sugarcane bagasse was ... -
Sintering behavior and microstructural characterization of Aluminium copper powder compacts (Al- 4.4 Cu-0.8 Si-0.5 Mg Wt% ) alloy prepared by powder metallurgy
(Universiti Malaysia PerlisSchool of Materials Engineering, 2008-05)Powder Metallurgy (P/M) is a near net shape metal forming techniques used to manufacture part to close tolerance. In this research, aluminium copper alloy (Al-4.4%Cu- 0.8% Si-0.5%Mg) is prepared by using P/M method. In ... -
Study on different sintering temperature on the composite ferum and cobalt reinforced with silicon carbide
(Universiti Malaysia PerlisSchool of Materials Engineering, 2008-04)Particulate-reinforced metal matrix composites (MMCs) have become more attractive to researches because of the problem of anisotropy and high cost of fibre reinforced MMCs. This study involves the fabrication of MMCs with ... -
Synthesis and characterization of Corroded anodized coating of Titanium base alloy, Austenitic steel and Aluminium base alloy commercially used
(Universiti Malaysia PerlisSchool of Materials Engineering, 2008-04)Involving this project, several techniques used to study the morphological structure as well as characterization of corroded anodized coating of titanium base alloy, austenitic steel and aluminium base alloy commercially ... -
Effect of Ethylene Diamine-co-Acrylic acid (EDAA) on properties of Acrylonitrile Butadiene styrene/Waste tyre dust composites (ABS/WTD)
(Universiti Malaysia PerlisSchool of Materials Engineering, 2008-04)Effect of coupling agent of ethylene diamine -co- and acrylic acid (EDAA) on properties of waste tyre dust ( WTD ) filled acrylonitrile butadiene stryene has been investigated. The investigation are including on the tensile ... -
The effect of sintering temperature on mechanical properties of natural and synthetic Hydroxyapatite with Alumina (1%) as an additive
(Universiti Malaysia PerlisSchool of Materials Engineering, 2008-05)A multi sintering temperature of hydroxyapatite (HA) will give an affect not only for the shape, composition and arrangement of the microstructure, but also to a high impact on mechanical properties of those samples. Natural ... -
The effect of cooling condition on the microstructure and properties of Al-4.4Cu-0.8Si-0.5Mg powder compacts
(Universiti Malaysia PerlisSchool of Materials Engineering, 2008-04)The aim of this research is to study the effect of cooling condition on microstructure and properties of Al alloy. Powder compacts from a premixed commercial aluminium powder Al-4.4Cu-0.8Si-0.5Mg (wt %) grade have been ...