School of Materials Engineering (FYP): Recent submissions
Now showing items 161-180 of 256
-
Aging effect of Sn-Ag-Cu lead free solder
(Universiti Malaysia PerlisSchool of Materials Engineering, 2008-03)Many issue related to the performance of lead free solder alloys have arisen. So, it should be take concern on it and one of the method is by studying the microstructure of those solder alloys. This because their mechanical ... -
Influences of Phosphoric acid (H3PO4) solution on formation of Porous Anodic Aluminum Oxide (AAO) thin film
(Universiti Malaysia PerlisSchool of Materials Engineering, 2008-04)The main objective of this study is to analyze the effect of anodizing parameter focusing on anodizing voltage and phosphoric acid (H3PO4) concentration on the formation of porous anodic aluminum oxide (AAO) film. The ... -
Fabrication of graded Porous Hydroxyapatite by using coconut fibre
(Universiti Malaysia PerlisSchool of Materials Engineering, 2008-04)This study was carried out to develop sample hydorxyapatite (HA) cylindrical with have porous in particular part for example his external layers has solid part while on the inside it exist porous. Further it can make as ... -
Characterization of casting alloy Al 319 (Al-12Si-4Cu-0.1Mg), PROTON cylinder head
(Universiti Malaysia PerlisSchool of Materials Engineering, 2008-04)The present study was undertaken to investigate the effect of metallurgical parameters on the hardness, microstructural characterization and porosity of heat-treated 319 alloys, with the aim of adjusting these parameters ... -
A study of microstructure and mechanical properties of copper filled Polypropylene and copper filled Epoxy
(Universiti Malaysia PerlisSchool of Materials Engineering, 2008-04)In this project, metal filled polymer composite had been produced by using powder metallurgy concept and cold pressing method. The processing method had influenced the properties of composite system and to establish the ... -
Agricultural residues as Precursors for activated carbon production (coconut waste)
(Universiti Malaysia PerlisSchool of Materials Engineering, 2008-05)Coconut meal and coconut shell were characterized to know the suitability to become the activated carbon precursors. Besides the low cost and decrease the market waste, this attempt was made to produce an alternative ... -
Agricultural residues as Precursors for activated carbon production (rice husk)
(Universiti Malaysia PerlisSchool of Materials Engineering, 2008-04)Rice husk because of low cost raw material and it activated form can be used as carbon precursor as a solution to reduce the agricultural waste. An effort was made to produce an activated carbon precursor from the rice ... -
A study of using grass (Malaysian foxtail) fiber in paper making
(Universiti Malaysia PerlisSchool of Materials Engineering, 2008-04)A various types of grasses can be found in Malaysia. A few of grass can be used for animal food and as a covering the earth only. More than that, grasses always abandoned or fired. Foxtail grass, also known as ‘rumput bulu’ ... -
Production of particle board from banana leaves
(Universiti Malaysia PerlisSchool of Materials Engineering, 2008-06)The method of agricultural waste disposal involving open burning which often to be used by the banana plantations entrepreneur is unpractical where it is contribute to air pollution. Base on the situation above, this study ... -
The production of fly ash aggregates
(Universiti Malaysia PerlisSchool of Materials Engineering, 2008-03)This aim of study is to characterize the physical properties manufactured aggregates that produces from waste, which is fly ash. In this study an attempt has been made to find the suitability of the fly ash waste and ... -
Effects of T6 treatment on the microstructural changes, hardness and thermal analysis of As-Cast Al-Si-Mg alloys
(Universiti Malaysia PerlisSchool of Materials Engineering, 2008-05)Aluminium-silicon-magnesium is usually applied in automotive industry such as in block engine. The main objective of this project is to study the changes in microstructure, hardness and the thermal analysis curve after ... -
Analysis of binary aluminium tin products with varying compositions and optimum flowability, tensile strength and hardness
(Universiti Malaysia PerlisSchool of Materials Engineering, 2008-04)Aluminium tin forms have applications in automobiles and electronic industries. The demand for these materials has been growing at a fast pace from several decades. It is therefore desirable that these materials are produced ... -
Dynamic vulcanization of waste paper filled of low density polyethylene (LDPE)/ ethylene propylene diene terpolymer (EPDM) composites
(Universiti Malaysia PerlisSchool of Materials Engineering, 2008-04)The effect of filler loading and dynamic vulcanization of paper sludge (PS) filled LDPE/EPDM was investigated. Blends with different filler loading ranging from 0 to 60 wt % were prepared in Z-blade mixer at 180 °C and a ... -
Study of erosion corrosion in oil and gas industry
(Universiti Malaysia PerlisSchool of Materials Engineering, 2008-05)This project is about study of the erosion corrosion in oil and gas industries based on the samples from Petronas Gas Processing Plant. The microstructure and hardness analysis was done to the sample ASTM A 105 Carbon ... -
Preliminary study on bagasse fiber with Polystyrene as polymer composites
(Universiti Malaysia PerlisSchool of Materials Engineering, 2008-03)The interest in long term sustainability of material resources has make advancements in bio-composites or else name as polymer composite materials which made from natural fibers and resins. Natural fibers reinforced with ... -
Preparation of high purity SiO2 from Rice Husk
(Universiti Malaysia PerlisSchool of Materials Engineering, 2008-04)A high purity silicon dioxide (97.08%) was obtained by atmosphere thermal decomposition of the acetic acid leached rice husk at 800°C for 15 minutes. Leaching process parameters such as pH of the acid solution, leaching ... -
Corrosion properties of Stainless steel
(Universiti Malaysia PerlisSchool of Materials Engineering, 2008-04)Chromium content in austenitic stainless steel 304 and 316L can increase the resistance to pitting corrosion through the formation of passive layer on the surface of metal. The corrosion properties of these stainless ... -
Preparation of anti rust paint with waste expanded Polystyrene
(Universiti Malaysia PerlisSchool of Materials Engineering, 2008-04)A formula for making paint using waste expanded polystyrene foam (EPS) as a binder in place of alkyd resin in most of the commercial paint was developed. Through the experiment the formula follows: the base material (EPS) ... -
The study on Ultra-fine WC-6 wt.%Co for producing cutting tool inserts
(Universiti Malaysia PerlisSchool of Materials Engineering, 2008-04)WC–Co cutting tools insert can be manufactured by controlling liquid phase migration or liquid redistribution during liquid phase sintering. In this study, the effect of temperature on mechanical properties has been studied. ... -
Preparation of rice straw-waste tire dust composite board
(Universiti Malaysia PerlisSchool of Materials Engineering, 2008-04)In this study agricultural lignocelluloses fiber (rice straw) and waste tire dust composite board were prepared using the method use in the wood-based panel industry. The manufacturing parameters were density (0.66g/cm3, ...