School of Materials Engineering (FYP): Recent submissions
Now showing items 221-240 of 256
-
The effect of heat treatment on Fe-Ni/SiC composite
(Universiti Malaysia PerlisSchool of Materials Engineering, 2008-04)The mechanical properties of Fe-Ni/SiC composite on five different soaking time were studied. The Fe-Ni/SiC composite consist of 78% Fe, 20% SiC and 2% Ni. The Fe-Ni/SiC composite was fabricated using powder metallurgy ... -
Effect of solution treatment and aging period on Magnesium sacrificial anode in backfill and soil environment
(Universiti Malaysia PerlisSchool of Materials Engineering, 2008-05)Magnesium anode is one of the materials that applied as sacrificial anode. In this study, high potential magnesium anode (HPMA) was used as a test sample. The main objective of this project was to evaluate the effect of ... -
Recovery of iron from sludge using solid phase materials
(Universiti Malaysia PerlisSchool of Materials Engineering, 2008-06)The application of metals extraction by polymer inclusion membrane (PIMs) was carried out by using solid phase materials. The ion carrier Cyanex 272 was incorporated into solid phase materials composed of cellulose ... -
Study of fabrication Al-Tin slag composite by powder metallurgy method
(Universiti Malaysia PerlisSchool of Materials Engineering, 2008-05)In the present investigation, Aluminum-tin slag composite have been produced by powder metallurgy (P/M) route. Aluminum (Al) and tin slag were undergo milling and sieving process where particle size <75 µm and <63 µm for ... -
The study of ultrasonic wave propagation in welded austenitic stainless steel
(Universiti Malaysia PerlisSchool of Materials Engineering, 2008-04)The propagation of ultrasonic waves in welded austenitic stainless steel (304 SS) is examined. Significant variations of welded samples have been observed for different wave propagation directions. The welded samples for ... -
Study on properties of sugarcane bagasse fiber filled Polypropylene composites
(Universiti Malaysia PerlisSchool of Materials Engineering, 2008-05)Bagasse fiber is a residue of a sugarcane milling process. In this research, bagasse fiber has been used as filler in polypropylene (PP) resin to open up further possibilities in waste management. The chemical treatment ... -
Chemical modification of wood fiber on the properties of Polypropylene/Wood fiber composites
(Universiti Malaysia PerlisSchool of Materials Engineering, 2008-05)The surface of wood fiber used as reinforcement in polypropylene/wood fiber composites was modified by acrylic acid. The effect of filler loading and acrylic acid as compatibilizer on mechanical properties, water absorption ... -
Influence of chemical treatment on surface morphology of natural fiber
(Universiti Malaysia PerlisSchools of Materials Engineering, 2008-04)The interest in using natural fibers in composites has increased in recent years due their lightweight, non-abrasive, combustible, non-toxic, low cost and biodegradable properties. However, lack of good interfacial adhesion, ... -
Microstructure of development Al-Mg-Si-Cu powder metallurgy under different addition of Sn
(Universiti Malaysia PerlisSchool of Materials Engineering, 2008-04)This project involve 3 sample types that had labeled as Premix A (1%Sn addition), Premix B (1.5%Sn addition) and Premix C (2.0%Sn), each types have five samples. After compaction process measured the weight, thickness, ... -
The effect of welding current on mechanical properties of Galvanized steel sheets in resistance spot welding (RSW)
(Universiti Malaysia PerlisSchool of Materials Engineering, 2008-04)This study about the effect of welding current and the cycles on the quality of weld joint on galvanized steel sheets using resistance spot welding. Examinations involve tensile shear and tensile peel strength (T-peel test) ... -
A study case of dissimilar welding between mild steel ( Low Carbon Steel ) and stainless steel on hardness vickers and tensile shear test for gas tungsten arc welding ( GTAW )
(Universiti Malaysia PerlisSchool of Materials Engineering, 2008-04)This report is about the experimental study on the effects of the dissimilar weld joint design, edge preparation and joint dimension on the weldability of Gas Tungsten Arc Welding ( GTAW ) between mild steel and stainless ... -
Application of response surface methodology for Copper extraction using solid phase immobilized with Cyanex 301
(Universiti Malaysia PerlisSchool of Materials Engineering, 2008-04)A solid phase containing Cyanex 301 was developed by using phase inversion procedure. The extraction of copper ion through this solid phase with the function of pH, weight of the solid phase and temperature were investigated ... -
Characterization of starch degradation during thermo-enzymatic hydrolysis
(Universiti Malaysia PerlisSchool of Materials Engineering, 2008-05)The behaviour of the enzyme (α-amylase and amyloglucosidase) during thermoenzymatic hydrolysis of starch is very important from an industrial point of view. The thermoenzymatic hydrolysis of these enzymes on starch depends ... -
Production of particle board from sugarcane bagasse
(Universiti Malaysia PerlisSchool of Materials Engineering, 2008-04)Particle board has been used widely in the furniture industry nowadays. In this study, the production of particle board from sugarcane bagasse is to reduce the waste of bagasse and air pollution. This study produced by ... -
Influence of H2C204 solution on formation of Porous AAO thin film
(Universiti Malaysia PerlisSchool of Material Engineering, 2008-04)The anodizing of aluminium has been investigated with the aim to realize nano-porous structures and nano-porous oxides for use as nano-templates. Before undergoing electrochemical oxidation, aluminium samples were cleaned ... -
Extraction of Copper from Aqueous Sulfate medium using microcapsule coated with Cyanex 301
(Universiti Malaysia PerlisSchool of Materials Engineering, 2008-03)The copper extraction with the microcapsules containing Cyanex 301 which prepared by solvent evaporation method was study. Gum arabic as dispersion stabilizer and dichloromethane as solvent are used in microcapsules ... -
The study of flame retardant non-halogen in High Density Polyethylene (HDPE)
(Universiti Malaysia PerlisSchool of Materials Engineering, 2008-04)The main objective of this study to investigate the effects of non-halogen flame retardant in high density polyethylene (HDPE) and observe their ignition properties. High density polyethylene (HDPE) was prepared with added ... -
Effect of Polyethylene glycol to Hydroxyapatite water filter
(Universiti Malaysia PerlisSchool of Materials Engineering, 2008-04)The effect of different percentage of binder (PEG) on the microstructure of hydroxyapatite (HA) and its density was examined. In this study, HA samples was prepared by wet mixing methods and samples was prepared using slip ... -
Synthesis and characterization of Fe-Al alloy with different sintering temperature
(Universiti Malaysia PerlisSchool of Materials Engineering, 2008-04)The iron aluminides Fe3Al and FeAl3 have been among the most widely studied intermetallics because of their low cost, low density, good wear resistance, ease of fabrication and resistance to oxidation and corrosion. A ... -
Sintering atmosphere effect on Al-0.2Mg alloy
(Universiti Malaysia PerlisSchool of Materials Engineering, 2008-04)The effect of sintering atmosphere on mechanical properties and microstructure of Al-0.2Mg alloy were investigated. In this study, one type of parameter were used that was; different sintering atmosphere. Al and Mg were ...