Browsing School of Materials Engineering (FYP) by Title
Now showing items 83-102 of 256
-
Effect of Poly(Acrylic acid) on mechanical, morphology properties, X-Ray diffraction and water absorption of Nanoclay filled low density Polyethylene composites
(Universiti Malaysia PerlisSchool of Materials Engineering, 2008-04)Effects of poly(acrylic acid) (PAA) of nanoclay filled low density polyethylene (LDPE) composite on mechanical and characterization were studied using Universal Testing Machine (UTM), X-ray diffraction (XRD), Scanning ... -
Effect of Polyethylene glycol to Hydroxyapatite water filter
(Universiti Malaysia PerlisSchool of Materials Engineering, 2008-04)The effect of different percentage of binder (PEG) on the microstructure of hydroxyapatite (HA) and its density was examined. In this study, HA samples was prepared by wet mixing methods and samples was prepared using slip ... -
The effect of Polyol and Isocyanate ratio to thermal properties of Polyurethane foam
(Universiti Malaysia Perlis (UniMAP)School of Materials Engineering, 2016-05)The effet of polyol and isocyanate ratio to thermal properties of polyurethane foam as thermal analysis were investigated. In this study, the polyol were used is palm oil based polyol type and there a nine ratio were ... -
Effect of pyrolysis parameter on properties on polyacrylonitrile (PAN) carbon fibers
(Universiti Malaysia Perlis (UniMAP)School of Materials Engineering, 2016-05)In this study, electrospun fibers were fabricated from polyacrylonitrile (PAN) and Dimethylformamide (DMF) as solvent by using an electrospinning method. The effect of pyrolysis parameters on properties of electrospun ... -
Effect of ratio of ethylene glycol to water and concentration of ammonium fluoride on synthesis of Cu2O nanostructures
(Universiti Malaysia Perlis (UniMAP)School of Materials Engineering, 2015-11)Cuprous oxide (Cu₂O) nanostructures have been synthesized via anodizing process in ethylene glycol electrolyte with different water content and concentration ofNH4F. The effects water content in ethylene glycol electrolyte ... -
Effect of sintering condition on the properties of Silicate ceramic materials
(Universiti Malaysia PerlisSchool of Materials Engineering, 2008-04)This study addresses the effects of fabrication techniques on the development of mechanical properties of sintered clay ceramics. The influence of thermal treatment, soaking time and firing temperature, were investigated ... -
The effect of sintering temperature on mechanical properties of natural and synthetic Hydroxyapatite with Alumina (1%) as an additive
(Universiti Malaysia PerlisSchool of Materials Engineering, 2008-05)A multi sintering temperature of hydroxyapatite (HA) will give an affect not only for the shape, composition and arrangement of the microstructure, but also to a high impact on mechanical properties of those samples. Natural ... -
Effect of solution treatment and aging period on Magnesium sacrificial anode in backfill and soil environment
(Universiti Malaysia PerlisSchool of Materials Engineering, 2008-05)Magnesium anode is one of the materials that applied as sacrificial anode. In this study, high potential magnesium anode (HPMA) was used as a test sample. The main objective of this project was to evaluate the effect of ... -
Effect of solution treatment on magnesium sacrificial anode
(Universiti Malaysia PerlisSchool of Materials Engineering, 2008-04)The main objective of this study is to determine the effect of solution treatment period on the corrosion behavior of magnesium anode. Commercial high potential magnesium anode was heat-treated at 3000C for 3, 6 and 9 hours ... -
Effect of solution treatment period on Magnesium anode in soil environment
(Universiti Malaysia PerlisSchool of Materials Engineering, 2008-03)The aim of this study is to determine the effect of heat treatment on the corrosion rate using immersion test in soil and backfill environment. Samples were heat treated at 300°C for 3, 6 and 9 hours in high temperature ... -
Effect of solution treatment temperature on the microstructure of Fe-40Ni-24Cr alloy
(Universiti Malaysia Perlis (UniMAP)School of Materials Engineering, 2016-06)The research study describes the effect of solution treatment temperature on the microstructure of Fe-40Ni-24Cr alloy. The working process is divided into three (3) working phases which are solution treatment process, ... -
Effect of solvent on mechanical properties of Poly(Methyl Methacrylate)/Palm Kernel Shell composites
(Universiti Malaysia Perlis (UniMAP), 2017-06)This project is focused on the effect of solvent on the properties of Poly (Methyl Methacrylate) (PMMA) composites filled with palm kernel shell (PKS). The PMMA/PKS composites with different filler loading were prepared ... -
Effect of temperature of electrolyte and anodizing voltage on the synthesis of CU₂O nanostructures by anodizing
(Universiti Malaysia Perlis (UniMAP)School of Materials Engineering, 2016-06)Nanostructured cuprous oxide were grown by the process of anodization of copper plate in the electrolyte of ethylene glycol mixed 0.15M KOH + 0.1M NH4F + 3% H₂O for 300 second under varying the conditions including anodizing ... -
The effect of temperature on the nitriding of Aluminium
(Universiti Malaysia Perlis (UniMAP), 2017-06)In this thesis writing, aluminium undergoes nitriding at three different temperatures which is 600°C, 625°C and 650°C. The surface also have been grind and polish with 800, 320 grinder paper and the other variable is rough ... -
Effect of the stabilizers on properties of natural rubber latex
(Universiti Malaysia Perlis (UniMAP)School of Materials Engineering, 2015-11)The effect of the stabilizers on properties of natural rubber latex was investigated. Different stabilizer with different amount of the concentration was used to investigate the colloidal stability of the natural rubber ... -
The effect of Thermo-oxidative aging on the mechanical properties and FTIR analysis of sugarcane fibre filled Polypropylene composite
(Universiti Malaysia PerlisSchool of Materials Engineering, 2008-05)The effect of thermo-oxidative aging for PP/Sugarcane composite with COCA or MAPP coupling agent and without coupling agent were investigated. The results indicated that the presence of coupling agent MAPP increased the ... -
The effect of treated and untreated Citronella filler loading on curing characteristic and mechanical properties of NR/SBR blends
(Universiti Malaysia Perlis (UniMAP), 2017-04)In this research, the effect of treated and untreated of Citronella filler loading from 10 phr until 50 phr on curing characteristic and mechanical properties of NR/SBR blends were studied. The Citronella leaves were ... -
The effect of varied welding currents and cycles on thin sheet mild steel with heat treatment process for resistance spot weld
(Universiti Malaysia PerlisSchool of Materials Engineering, 2008-04)This report is about the experimental study on the effects of welding current and cycles on the weldability of resistance spot welded low carbon steel with heat treatment process. The heat treatment processes that been ... -
The effect of various WT% of polypropylene on the hardness and anti-friction behavior of Al-filled polypropylene
(Universiti Malaysia Perlis (UniMAP)School of Materials Engineering, 2016-05)This project is the study of hardness and anti-friction behavior of Al-filled polypropylene. Sample preparation involves sand casting and double screw extrusion to get finer size of polypropylene. The castings were done ... -
The effect of vulcanization in Natural Rubber (NR) on the properties of Epoxy/NR/Graphene conductive composite
(Universiti Malaysia Perlis (UniMAP)School of Materials Engineering, 2016-06)Natural rubber (NR) was added as secondary matrix and toughening agent into epoxy/GNP composites to improve properties of the composite. Density, mechanical, morphology, electrical conductivity and thermal stability test ...