Browsing School of Materials Engineering (FYP) by Title
Now showing items 48-67 of 256
-
The effect of alloying elements in sintered-recycle steel compaction
(Universiti Malaysia PerlisSchool of Materials Engineering, 2008-04)Effects of alloying elements in the sintered-recycle steel compaction were studied using powder metallurgy technique. High-energy milling technique was used to crush and mill the waste steel chip in the form of spiral ... -
Effect of annealing temperatures of immobilized PANI/TIO₂ system
(Universiti Malaysia Perlis (UniMAP)School of Materials Engineering, 2016-05)In this study, PANI and TiO₂ were prepared by using simple mixing of soluble PANI and TiO₂ powder and being coated onto glass plate. Some of binders such as polyvinylchloride were used. From the different loading study, ... -
Effect of ball to powder ratio and media density on fine grinding and mechanical activation of hematite ores in planetary mill
(Universiti Malaysia Perlis (UniMAP), 2017-06)Raw hematite ore from Kulim, Kedah was mechanically activated using physical technique of powder ball milling. Operational parameter during fine grinding of the hematite ore are ball to powder ratio (3:1, 5:1, 7:1), milling ... -
The effect of Barium Oxide to the properties of natural Hidroxyapatite
(Universiti Malaysia PerlisSchool of Materials Engineering, 2008-04)This project reports the mechanical properties and the microstructure of composite materials made of hydroxyapatite, obtained from natural cow bone, and BaO (1,2 and 5 wt.%), which were sintered at different temperatures ... -
Effect of Citric acid on properties of Cassava starch foam
(Universiti Malaysia Perlis (UniMAP), 2017-06)The effects of citric acid towards the properties of cassava starch foam was studied in this thesis. The influences of crosslinking on cassava starch was described fundamentally. This include the formation of cell sizes, ... -
The effect of cooling condition on the microstructure and properties of Al-4.4Cu-0.8Si-0.5Mg powder compacts
(Universiti Malaysia PerlisSchool of Materials Engineering, 2008-04)The aim of this research is to study the effect of cooling condition on microstructure and properties of Al alloy. Powder compacts from a premixed commercial aluminium powder Al-4.4Cu-0.8Si-0.5Mg (wt %) grade have been ... -
The effect of corrosion in acidic solution to the phase and microstructure of SAC305 solder
(Universiti Malaysia Perlis (UniMAP)School of Materials Engineering, 2016-06)The effect of corrosion to the phase and microstructure of solder Sn-3.0Ag-0.5Cu (SAC305) in 1.0 M HCl were investigated under polarized condition. The potentiodynamic polarization analysis was fixed at a scan rate of 2.5 ... -
Effect of corrosion in acidic solution to the phase and microstructure of SN-CU solder
(Universiti Malaysia Perlis (UniMAP)School of Materials Engineering, 2016-06)The effect of corrosion to the phase and microstructure for solder Sn-Cu solder in 1.0 MHCl was studied. The corrosion tests were carried out by potentiodynamic polarization method meanwhile the scan rate used was fixed ... -
Effect of current stressing on intermetallic formation and mechanical properties of lead free SAC solder and SAC/activated carbon composite solder joint
(Universiti Malaysia Perlis (UniMAP)School of Materials Engineering, 2016-06)This study will investigate the effects of current stressing on intermetallic compound growth and the mechanical properties of lead free SAC and SAC/Activated carbon solder composite solder joint for certain current ... -
The effect of different particle size of steel slag as filler in concrete
(Universiti Malaysia Perlis (UniMAP)School of Materials Engineering, 2016-06)Manufacturing of Ordinary Portland Cement(OPC) will produces high consumption of energy and carbon dioxide emission. This study is to produce a concrete that uses steel slag as cement replacement. 20% of steel slag and 80% ... -
Effect of different treatment of sugarcane fiber on mechanical properties, morphology and swelling behavior of Low density Polyethylene (LDPE) composites
(Universiti Malaysia PerlisSchool of Materials Engineering, 2008-04)The sugarcane bagasse is a residue widely generated in high proportions in the agroindustry. In this research, the bagasse fiber has been used as reinforcing component for polyethylene. The chemical treatments using sodium ... -
Effect of different types of polymeric binder towards photocatalytic activity of immobilized PANI/TiO₂ system
(Universiti Malaysia Perlis (UniMAP)School of Materials Engineering, 2016-05)This thesis report studies about the effect of different type of binder towards photocatalytic activity of PANI/TiO₂ photocatalyst immobilized system. Different binder and parameter of binders which is 3g, 4g, 5g and 6g ... -
Effect of different vulcanization system and filler loading on structure and mechanical properties of natural rubber foam
(Universiti Malaysia Perlis (UniMAP)School of Materials Engineering, 2016-06)This study was conducted to identify the effect of different vulcanization system and tyre dust loading on structure and mechanical properties of natural rubber foam. The natural rubber foam was prepared by mixing the ... -
Effect of Ethylene Diamine-co-Acrylic acid (EDAA) on properties of Acrylonitrile Butadiene styrene/Waste tyre dust composites (ABS/WTD)
(Universiti Malaysia PerlisSchool of Materials Engineering, 2008-04)Effect of coupling agent of ethylene diamine -co- and acrylic acid (EDAA) on properties of waste tyre dust ( WTD ) filled acrylonitrile butadiene stryene has been investigated. The investigation are including on the tensile ... -
Effect of exfoliated graphite on electrical properties of Chitosan/Polyvinyl alcohol films towards toluene
(Universiti Malaysia Perlis (UniMAP)School of Materials Engineering, 2016-06)In this study, chitosan/polyvinyl alcohol/exfoliated graphite matrix films were prepared to observe the effect of exfoliated graphite concentration on microstructure, electrical conductivity, band gap energy and sensing ... -
Effect of filler loading of waste tire dust filled Acrylonitrile Butadiene Styrene composites
(Universiti Malaysia PerlisSchool of Materials Engineering, 2008-04)Waste tire dust is an organic material which can be used as filler in polymer composites. Effects of filler loading of the waste tire dust filled acrylonitrile butadiene styrene composites were studied. The blend ratios ... -
Effect of Geopolymer coating on mild steel
(Universiti Malaysia Perlis (UniMAP)School of Materials Engineering, 2016)Geopolymer paste is synthesized of fly ash and alkaline activators which is sodium hydroxide solution and sodium silicate solution. Geopolymer paste are good in strength, durability and corrosion resistance. The strength ... -
The Effect of Granulated Blast Furnace Slag (GBFS) Composition on Geopolymer Paste Properties
(Universiti Malaysia Perlis (UniMAP), 2017)For the research study, I will perform the effect of Granulated Blast Furnace Slag (GBFS) composition on geopolymer paste properties. For my final year project, I will use raw materials of slag and fly ash that was provided ... -
Effect of grinding media size and shape on the iron mill scale particle and properties
(Universiti Malaysia PerlisSchool of Materials Engineering, 2008-05)A study was undertaken to determine how the effect of grinding media size and shape on the iron mill scale particle size and properties. Comparative tests were conducted using the two types of grinding media which are ... -
The effect of HAP addition on the physical and mechanical properties of co-cr-mo/HAP composites for biomedical apllications
(Universiti Malaysia Perlis (UniMAP)School of Materials Engineering, 2015-11)This paper reports on the effect of HAP addition on the physical and mechanical properties of Co-Cr-Mo/HAP composites fabricates by powder metallurgy. Co-Cr-Mo is used in orthopedic because of its excellent biocompatibility ...