Browsing School of Materials Engineering (FYP) by Title
Now showing items 94-113 of 256
-
Effect of solvent on mechanical properties of Poly(Methyl Methacrylate)/Palm Kernel Shell composites
(Universiti Malaysia Perlis (UniMAP), 2017-06)This project is focused on the effect of solvent on the properties of Poly (Methyl Methacrylate) (PMMA) composites filled with palm kernel shell (PKS). The PMMA/PKS composites with different filler loading were prepared ... -
Effect of temperature of electrolyte and anodizing voltage on the synthesis of CU₂O nanostructures by anodizing
(Universiti Malaysia Perlis (UniMAP)School of Materials Engineering, 2016-06)Nanostructured cuprous oxide were grown by the process of anodization of copper plate in the electrolyte of ethylene glycol mixed 0.15M KOH + 0.1M NH4F + 3% H₂O for 300 second under varying the conditions including anodizing ... -
The effect of temperature on the nitriding of Aluminium
(Universiti Malaysia Perlis (UniMAP), 2017-06)In this thesis writing, aluminium undergoes nitriding at three different temperatures which is 600°C, 625°C and 650°C. The surface also have been grind and polish with 800, 320 grinder paper and the other variable is rough ... -
Effect of the stabilizers on properties of natural rubber latex
(Universiti Malaysia Perlis (UniMAP)School of Materials Engineering, 2015-11)The effect of the stabilizers on properties of natural rubber latex was investigated. Different stabilizer with different amount of the concentration was used to investigate the colloidal stability of the natural rubber ... -
The effect of Thermo-oxidative aging on the mechanical properties and FTIR analysis of sugarcane fibre filled Polypropylene composite
(Universiti Malaysia PerlisSchool of Materials Engineering, 2008-05)The effect of thermo-oxidative aging for PP/Sugarcane composite with COCA or MAPP coupling agent and without coupling agent were investigated. The results indicated that the presence of coupling agent MAPP increased the ... -
The effect of treated and untreated Citronella filler loading on curing characteristic and mechanical properties of NR/SBR blends
(Universiti Malaysia Perlis (UniMAP), 2017-04)In this research, the effect of treated and untreated of Citronella filler loading from 10 phr until 50 phr on curing characteristic and mechanical properties of NR/SBR blends were studied. The Citronella leaves were ... -
The effect of varied welding currents and cycles on thin sheet mild steel with heat treatment process for resistance spot weld
(Universiti Malaysia PerlisSchool of Materials Engineering, 2008-04)This report is about the experimental study on the effects of welding current and cycles on the weldability of resistance spot welded low carbon steel with heat treatment process. The heat treatment processes that been ... -
The effect of various WT% of polypropylene on the hardness and anti-friction behavior of Al-filled polypropylene
(Universiti Malaysia Perlis (UniMAP)School of Materials Engineering, 2016-05)This project is the study of hardness and anti-friction behavior of Al-filled polypropylene. Sample preparation involves sand casting and double screw extrusion to get finer size of polypropylene. The castings were done ... -
The effect of vulcanization in Natural Rubber (NR) on the properties of Epoxy/NR/Graphene conductive composite
(Universiti Malaysia Perlis (UniMAP)School of Materials Engineering, 2016-06)Natural rubber (NR) was added as secondary matrix and toughening agent into epoxy/GNP composites to improve properties of the composite. Density, mechanical, morphology, electrical conductivity and thermal stability test ... -
The effect of welding current on mechanical properties of Galvanized steel sheets in resistance spot welding (RSW)
(Universiti Malaysia PerlisSchool of Materials Engineering, 2008-04)This study about the effect of welding current and the cycles on the quality of weld joint on galvanized steel sheets using resistance spot welding. Examinations involve tensile shear and tensile peel strength (T-peel test) ... -
Effect of winding angles on the epoxy/kenaf/glass fiber hybrid composite by filament winding process
(Universiti Malaysia Perlis (UniMAP), 2017-06)The study on the effect of winding angle on the mechanical properties of the kenaf/glass fiber epoxy hybrid composite was successfully conducted. In this paper, epoxy matrix, kenaf and glass fiber were selected as the raw ... -
Effect of Zinc additions on Sn-0.7Cu-0.05Ni lead free solder alloy
(Universiti Malaysia Perlis (UniMAP), 2017-06)This project is focusing on the effect of zinc additions on Sn-0.7Cu-0.05Ni lead free solder alloy. The additional of micro-alloying have been developed by using casting technique with different percentage of zinc which ... -
The effects of coconut husk fiber versus coconut shell powder in thermoplastic polyurethane (TPU) composites
(Universiti Malaysia Perlis (UniMAP)School of Materials Engineering, 2016-06)Thermoplastic polyurethane (TPU) is one of the thermoplastic where can be enhanced the characteristics by adding filler. TPU have been used in a wide variety of industries fields. This research describes the effect of ... -
Effects of dynamic vulcanization on properties of polypropylene/natural rubber/thermoplastic starch blends
(Universiti Malaysia Perlis (UniMAP)School of Materials Engineering, 2016-05)The effects of thermoplastic starch (TPS) loading on polypropylene (PP)/natural rubber (NR) blend vulcanized with N, N’-m-phenylene bismaleimide (HVA-2) were investigated. Thermoplastic starch ratios was varied at ... -
Effects of recycled HDPE/PET blend compositions and compatibilizer employment on the mechanical and thermal
(Universiti Malaysia Perlis (UniMAP), 2017-04)This study is focused on the improvement of mechanical properties of recycles high density polyethylene (rHDPE) and recycles polyethylene terephthalate (rPET) and investigates their thermal properties. The rHDPE/rPET with ... -
Effects of T6 treatment on the microstructural changes, hardness and thermal analysis of As-Cast Al-Si-Mg alloys
(Universiti Malaysia PerlisSchool of Materials Engineering, 2008-05)Aluminium-silicon-magnesium is usually applied in automotive industry such as in block engine. The main objective of this project is to study the changes in microstructure, hardness and the thermal analysis curve after ... -
Effects of ultrasonication-assisted homogenization on morphology and properties of thermoplastic starch/cellulose biocomposites
(Universiti Malaysia Perlis (UniMAP), 2017)The thermoplastic starch/cellulose biocomposites were manufactured as green biocomposite films. TPS was produced through plasticization which the mixture of granule starch, water and glycerine went through the heating ... -
Electroplating copper on aluminium alloy
(Universiti Malaysia Perlis (UniMAP)School of Materials Engineering, 2016-06)Electroplating of copper on aluminium alloy surface by using copper sulphate solution as an electrolyte solution. This study was done to analyse the influence of voltage (5V-25V) on electroplating of copper on aluminium ... -
Establishment of material selection and design consideration for bulletproof vest
(Universiti Malaysia Perlis (UniMAP)School of Materials Engineering, 2015-11)A bulletproof vest is a protective clothing that is worn on the body of the wearer. Basically a bulletproof vest is used to absorb or disperse the impact and reduce or prevent the penetration of projectiles and shrapnel ... -
Ethylene Vinyl Acetate (EVA) nanocomposites incorporation hybrid nanofillers for Biomedical applications
(Universiti Malaysia Perlis (UniMAP)School of Materials Engineering, 2016-06)Ethyl vinyl acetate (EVA) copolymers possess exceptional mechanical properties, barrier properties and biocompatibility, thus they are potentially to become as materials for biomedical applications. In this research, ...