Browsing School of Materials Engineering (FYP) by Title
Now showing items 74-93 of 256
-
The effect of mechanical properties of sylanized durian husk filled rHDPE biocomposites
(Universiti Malaysia Perlis (UniMAP)School of Materials Engineering, 2016-05)This study focused on the utilization of Durian husk (DH) as natural filler in recycled high density polyethylene (rHDPE) composites. The preparation of both untreated and treated rHDPE/DH biocomposites at different filler ... -
Effect of milling speed on the iron mill scale particle size
(Universiti Malaysia PerlisSchool of Materials Engineering, 2008-04)Iron mill scale is a waste of steel processing and physically is flakes in shape. Milling is a process to reduce iron mill scale into a fine powder. The purpose of this study is to find the best milling speed to produce ... -
Effect of mixing parameter on epoxy composites: mechanical and microscopy analysis
(Universiti Malaysia Perlis (UniMAP), 2017-06)Effect of mixing speed and mixing time on epoxy/nanoclay composites’ mechanical and morphology properties has been studied in this paper. Fixed amount of nanoclay (3phr) was used to mix by 250 rpm and 500 rpm for 1, 2, 2.5 ... -
The effect of modified Jackfruit (Artocarpus Heterophyllus Lam.) seed starch on the properties of poly (Lactic acid) blends
(Universiti Malaysia Perlis (UniMAP)School of Materials Engineering, 2016-06)The effect of the modified jackfruit seed starch on the properties of PLA were investigated. The blend systems were prepared by melt blending method and compression molding. There are total of three blend system studied; ... -
Effect of new coupling agent based on Coconut oil on mechanical properties, swelling behavior and morphology of Silica filled Polypropylene composites
(Universiti Malaysia PerlisSchool of Materials Engineering, 2008-04)The suitability of using coconut oil coupling agent (COCA) as a new coupling agent in polypropylene (PP) composites was studied. As compariosn, maleic anhydride polypropylene (MAPP) was used in silica filled PP composites. ... -
The effect of Nickel addition for glass formability of Cu-Ti-Ni amorphous alloy
(Universiti Malaysia Perlis (UniMAP), 2017-05)The Cu50-Ti50 powders were prepared in this project in terms of glass formability and kinetic behaviour with the addition of Ni on different percentages (X= 5%, 10%) by mechanical alloying using planetary ball mill. Before ... -
Effect of particle size and milling process on the microstructure and thermal properties of Copper Silicon Carbide (CuSiC) composites for electronic packing application
(Universiti Malaysia PerlisSchool of Materials Engineering, 2008-03)Shrinking size and increasing functionality of IC device has induced serious thermal problem. Good thermal dissipation, light weight and easy-to-process material, such as CuSiC, is a highly potential heat spreader material ... -
Effect of particle size on rate sensitivity properties of sawdust reinforced Polyproplene (PP) composites under wide range of strain rates
(Universiti Malaysia Perlis (UniMAP)School of Materials Engineering, 2016-06)Particle size of natural fillers and strain rate can affect the mechanical properties of composite materials. However, there is limited research was done regarding on sawdust reinforced thermoplastic polymer under wide ... -
Effect of polarization scan rate on the corrosion properties of SAC305 in acidic solution
(Universiti Malaysia Perlis (UniMAP)School of Materials Engineering, 2016-06)The corrosion behaviour of the Sn-3.0Ag-0.5Cu (SAC305) solder to the corrosion properties of alloys in an acidic solution were investigated under polarized conditions. The corrosion parameters including the current ... -
Effect of Poly(Acrylic acid) on mechanical, morphology properties, X-Ray diffraction and water absorption of Nanoclay filled low density Polyethylene composites
(Universiti Malaysia PerlisSchool of Materials Engineering, 2008-04)Effects of poly(acrylic acid) (PAA) of nanoclay filled low density polyethylene (LDPE) composite on mechanical and characterization were studied using Universal Testing Machine (UTM), X-ray diffraction (XRD), Scanning ... -
Effect of Polyethylene glycol to Hydroxyapatite water filter
(Universiti Malaysia PerlisSchool of Materials Engineering, 2008-04)The effect of different percentage of binder (PEG) on the microstructure of hydroxyapatite (HA) and its density was examined. In this study, HA samples was prepared by wet mixing methods and samples was prepared using slip ... -
The effect of Polyol and Isocyanate ratio to thermal properties of Polyurethane foam
(Universiti Malaysia Perlis (UniMAP)School of Materials Engineering, 2016-05)The effet of polyol and isocyanate ratio to thermal properties of polyurethane foam as thermal analysis were investigated. In this study, the polyol were used is palm oil based polyol type and there a nine ratio were ... -
Effect of pyrolysis parameter on properties on polyacrylonitrile (PAN) carbon fibers
(Universiti Malaysia Perlis (UniMAP)School of Materials Engineering, 2016-05)In this study, electrospun fibers were fabricated from polyacrylonitrile (PAN) and Dimethylformamide (DMF) as solvent by using an electrospinning method. The effect of pyrolysis parameters on properties of electrospun ... -
Effect of ratio of ethylene glycol to water and concentration of ammonium fluoride on synthesis of Cu2O nanostructures
(Universiti Malaysia Perlis (UniMAP)School of Materials Engineering, 2015-11)Cuprous oxide (Cu₂O) nanostructures have been synthesized via anodizing process in ethylene glycol electrolyte with different water content and concentration ofNH4F. The effects water content in ethylene glycol electrolyte ... -
Effect of sintering condition on the properties of Silicate ceramic materials
(Universiti Malaysia PerlisSchool of Materials Engineering, 2008-04)This study addresses the effects of fabrication techniques on the development of mechanical properties of sintered clay ceramics. The influence of thermal treatment, soaking time and firing temperature, were investigated ... -
The effect of sintering temperature on mechanical properties of natural and synthetic Hydroxyapatite with Alumina (1%) as an additive
(Universiti Malaysia PerlisSchool of Materials Engineering, 2008-05)A multi sintering temperature of hydroxyapatite (HA) will give an affect not only for the shape, composition and arrangement of the microstructure, but also to a high impact on mechanical properties of those samples. Natural ... -
Effect of solution treatment and aging period on Magnesium sacrificial anode in backfill and soil environment
(Universiti Malaysia PerlisSchool of Materials Engineering, 2008-05)Magnesium anode is one of the materials that applied as sacrificial anode. In this study, high potential magnesium anode (HPMA) was used as a test sample. The main objective of this project was to evaluate the effect of ... -
Effect of solution treatment on magnesium sacrificial anode
(Universiti Malaysia PerlisSchool of Materials Engineering, 2008-04)The main objective of this study is to determine the effect of solution treatment period on the corrosion behavior of magnesium anode. Commercial high potential magnesium anode was heat-treated at 3000C for 3, 6 and 9 hours ... -
Effect of solution treatment period on Magnesium anode in soil environment
(Universiti Malaysia PerlisSchool of Materials Engineering, 2008-03)The aim of this study is to determine the effect of heat treatment on the corrosion rate using immersion test in soil and backfill environment. Samples were heat treated at 300°C for 3, 6 and 9 hours in high temperature ... -
Effect of solution treatment temperature on the microstructure of Fe-40Ni-24Cr alloy
(Universiti Malaysia Perlis (UniMAP)School of Materials Engineering, 2016-06)The research study describes the effect of solution treatment temperature on the microstructure of Fe-40Ni-24Cr alloy. The working process is divided into three (3) working phases which are solution treatment process, ...