Browsing School of Materials Engineering (FYP) by Title
Now showing items 217-236 of 256
-
Study on properties of sugarcane bagasse fiber filled Polypropylene composites
(Universiti Malaysia PerlisSchool of Materials Engineering, 2008-05)Bagasse fiber is a residue of a sugarcane milling process. In this research, bagasse fiber has been used as filler in polypropylene (PP) resin to open up further possibilities in waste management. The chemical treatment ... -
Study on static mechanical properties of Linear Low Density Polyethylene (LLDPE) reinforced rice husk (RH)/Sawdust Hybrid composite under various loading rates
(Universiti Malaysia Perlis (UniMAP)School of Materials Engineering, 2016-06)Strain rate effect is a vital factor that seriously affects the mechanical properties of a material under loading conditions. Hence, in this study, static mechanical properties of linear low density polyethylene (LLDPE) ... -
Study on the effect of reinforcement particle size parameter on Aluminum metal matrix composite reinforced with Alumina particles
(Universiti Malaysia PerlisSchool of Materials Engineering, 2008-04)The physical and mechanical properties of different particle sizes of alumina reinforce in aluminum metal matrix composite were investigated. In general, P/M aluminum matrix composites exhibit good levels of mechanical ... -
A study on the effect of temperature on morphology of precipitate dolomite
(Universiti Malaysia Perlis (UniMAP)School of Materials Engineering, 2016-05)The main objective of this project is to study the effect of temperature on morphology of precipitate calcium magnesium carbonate. This examine involves the utility of different temperature for carbonation process as a way ... -
Study on the microstructure and properties of Al-Zn alloy fabricated by sand casting process
(Universiti Malaysia Perlis (UniMAP), 2017-06)In this research, the microstructure and properties of aluminium zinc (Al-Zn) alloy with different weight percentage have been studied. This project were carried out by sand casting process. The as-cast sample were prepared ... -
A study on the purification of Limestone
(Universiti Malaysia Perlis (UniMAP)School of Materials Engineering, 2016-06)This research study focused on the purification of limestone by multiple reprecipitation. This study involves the application of different temperature for carbonation process as to observe the reactiveness of particles ... -
The study on Ultra-fine WC-6 wt.%Co for producing cutting tool inserts
(Universiti Malaysia PerlisSchool of Materials Engineering, 2008-04)WC–Co cutting tools insert can be manufactured by controlling liquid phase migration or liquid redistribution during liquid phase sintering. In this study, the effect of temperature on mechanical properties has been studied. ... -
Study the effect of replacement of fly ashon ordinary portland cement
(Universiti Malaysia Perlis (UniMAP)School of Materials Engineering, 2016-05)The replacement of fly ash in Ordinary Portland cement have been conducted to measure the strength of concrete in different ratio between fly ash and cement. This research is involved three stage like Raw material analysis, ... -
Surface modification of low carbon steel and alloy steel by boriding diffusion coating
(Universiti Malaysia Perlis (UniMAP)School of Materials Engineering, 2016-06)In this study, Inconel 718 and mild steel rods with diameter 20 mm were undergo boriding diffusion coating by using pack cementation method at 900°C for 30, 60 and 90 minutes. This surface modification was conducted to ... -
Synthesis and characterisation of Niobium doped Yttria stabilised Zirconia
(Universiti Malaysia Perlis (UniMAP)School of Materials Engineering, 2016-05)Nb-8YSZ pellets were produced by two different methods – solid state (SS) processing and sol-gel (SG) synthesis, varying the content of Nb for each of them (0 –1.5% Nb). The Nb-8YSZ pellets were sintered at 1550°C, and ... -
Synthesis and characterisation of SiC nanomaterials from reaction of palm kernel shell and silica
(Universiti Malaysia Perlis (UniMAP)School of Materials Engineering, 2016-06)Silicon carbide (SiC) is one of the non-oxide ceramic materials that are widely developed due to its superior properties. Typically, SiC nanomaterials are synthesised by using high purity of silicon react with high purity ... -
Synthesis and characterization of alumina nanoparticles by using a sol gel method
(Universiti Malaysia Perlis (UniMAP), 2017-06)Alumina (Al2O3) nanoparticles were successfully synthesized via sol gel method at different sintering temperature using aluminum nitrate and citric acid with molar ratio 0.5 C/N. The alumina nanoparticles were characterized ... -
Synthesis and characterization of biomimetic of Zinc Oxide
(Universiti Malaysia Perlis (UniMAP), 2017-06)This research explores the preparation and characterization of zinc oxide catalyst prepared by using mint and pine leaves as template respectively and investigation of its catalytic activity for the photoreduction of Fe3+ ... -
Synthesis and characterization of biomimetic titanium dioxide
(Universiti Malaysia Perlis (UniMAP), 2017-06)Synthesis of titanium dioxide has become popular nowadays. Biomimetic method has been demonstrated to be very effective ways for synthesizing the titanium dioxide as it low cost and environmental friendly. In this research, ... -
Synthesis and characterization of Cobalt/Calcium Carbonate catalyst in the production of carbon nanotubes
(Universiti Malaysia Perlis (UniMAP), 2017-06)Since its discovery, carbon nanotubes (CNTs) have been widely researched owing to their large potential in nanotechnological applications. The effects of catalyst calcination behavior (temperature and duration) on the ... -
Synthesis and characterization of Corroded anodized coating of Titanium base alloy, Austenitic steel and Aluminium base alloy commercially used
(Universiti Malaysia PerlisSchool of Materials Engineering, 2008-04)Involving this project, several techniques used to study the morphological structure as well as characterization of corroded anodized coating of titanium base alloy, austenitic steel and aluminium base alloy commercially ... -
Synthesis and characterization of Fe from different source doped 8YSZ for solid electrolyte in solid oxide fuel cell (SOFC)
(Universiti Malaysia Perlis (UniMAP)School of Materials Engineering, 2016-06)The samples from different sources of Fe in oxide form (pure iron oxide powders, Fe₂O₃) and Fe source from salt (iron nitrate, Fe(NO₃)₃) for different compositions (pure YSZ, 1FeYSZ, 2FeYSZ and 3FeYSZ) were prepared and ... -
Synthesis and characterization of Fe-Al alloy with different sintering temperature
(Universiti Malaysia PerlisSchool of Materials Engineering, 2008-04)The iron aluminides Fe3Al and FeAl3 have been among the most widely studied intermetallics because of their low cost, low density, good wear resistance, ease of fabrication and resistance to oxidation and corrosion. A ... -
Synthesis and characterization of glass fiber grade specimen using different source of kaolin
(Universiti Malaysia Perlis (UniMAP), 2017-04)There are many grade of glass that were available in the markets. Different grade of glass can be synthesized by using different sources of raw materials. In this project, glass fiber grade specimen was synthesis using ... -
Synthesis and characterization of lead free SnCu & SnCu/SiC composite solder
(Universiti Malaysia Perlis (UniMAP), 2017-06)The hazardous contain in lead solders have stimulate the current researchers to develop a lead free solders with a same or superior properties. A new approach has been done by introduce a lead free composite solder with ...