Browsing School of Materials Engineering (FYP) by Title

Now showing items 171-190 of 256

    • The process of electroplating in presence of Nickel Salts 

      Mohd Saiful Khairuddin Azahar (Universiti Malaysia PerlisSchool of Materials Engineering, 2008-04)
      Electroplating process has been carried out by utilising the Watt’s Bath without brighteners. Plots of weight change of electrodes versus current density shows that weight loss of anodes and weight of deposits on cathodes ...

    • The processing of pegmatite feldspar and extraction of feldspar and silica 

      Nor'Ain, Yusah (Universiti Malaysia Perlis (UniMAP)School of Materials Engineering, 2016-05)
      The task given is to process the pegmatite ore and to extract the minerals from the ore independently that is taken from Bukit Mor, Muar, Johor. The first step is to crush the pegmatite ore using jaw and cone crusher ...

    • Production and characterization of epoxy syntactic foam filled epoxy sphere 

      Munzier, Sahari (Universiti Malaysia Perlis (UniMAP)School of Materials Engineering, 2016-05)
      The primary aim of this research is to identify the properties of the epoxy syntactic foam (ESF) and the physical factor that will alter their properties. The Epoxy Syntactic Foam (ESF) that were used in this study was ESF ...

    • The production of fly ash aggregates 

      Nur Amalina Ahmad (Universiti Malaysia PerlisSchool of Materials Engineering, 2008-03)
      This aim of study is to characterize the physical properties manufactured aggregates that produces from waste, which is fly ash. In this study an attempt has been made to find the suitability of the fly ash waste and ...

    • The production of paper from sugarcane bagasse 

      Ahmad Nurhilmi, Abdul Gani (Universiti Malaysia PerlisSchool of Materials Engineering, 2008-04)
      The paper industry worldwide always faced a problem on lack of raw material due to deforestation. The agriculture waste material can be an alternative raw material to produce paper. For this study, sugarcane bagasse was ...

    • Production of particle board from banana leaves 

      Wan Suhardi Wan Md. Sukri (Universiti Malaysia PerlisSchool of Materials Engineering, 2008-06)
      The method of agricultural waste disposal involving open burning which often to be used by the banana plantations entrepreneur is unpractical where it is contribute to air pollution. Base on the situation above, this study ...

    • Production of particle board from sugarcane bagasse 

      Mohd Zamri Abdullah (Universiti Malaysia PerlisSchool of Materials Engineering, 2008-04)
      Particle board has been used widely in the furniture industry nowadays. In this study, the production of particle board from sugarcane bagasse is to reduce the waste of bagasse and air pollution. This study produced by ...

    • Properties and characterization of cerber mangas (sea mango) filled poly (vinyl alcohol) biocomposite films 

      Siti Saodah, Ismi Hissan (Universiti Malaysia Perlis (UniMAP)School of Materials Engineering, 2016-06)
      This research was focused on the effect of sea mango fiber (SMF) content and chemical modification on tensile and thermal properties, morphology and moisture content of poly(vinyl alcohol) (PVA)/sea mango fiber (SMF) ...

    • The properties and photocatalytic behaviour of TiO₂ and ZnO particles after modification with PVP and Ag nanoparticles 

      Mohd Faidhiradhi, Mohd Fazuki (Universiti Malaysia Perlis (UniMAP)School of Materials Engineering, 2016-05)
      The commercialized zinc oxide (ZnO) and titania (TiO₂) powders are modified with polyvinylpyrrolidone (PVP) and silver (Ag) nanoparticles. The modification process is done via a simple wet chemistry method. The effect of ...

    • Properties of carbon nanotubes and calcium carbonate filled polymer composites 

      Noor Azwa, Mohd Noor (Universiti Malaysia Perlis (UniMAP)Scholl of Materials Engineering, 2016-05)
      This project was focused on the fabrication and characterization of CNTs-CaCO3 filled epoxy composites. The polymer composites were prepared with different ratio of filler loading by using a mechanical stirrer with speed ...

    • Properties of Chitosan/Halloysite nanotubes composites films 

      Syahira Adila, Mat Sulaiman (Universiti Malaysia Perlis (UniMAP)School of Materials Engineering, 2016-06)

    • Properties of CNTs/Calcium Carbonate filled polymer composites 

      Siti Maisarah, Suhaimi (Universiti Malaysia Perlis (UniMAP), 2017-06)
      In the present work, the properties of the synthesized hybrid carbon nanotube-calcium carbonate (CNTs-CaCO3), prepared via chemical vapor deposition and a physically mixed CNTs-CaCO3 filled epoxy composites, at various ...

    • Properties of oil palm flour filled Polypropylene composites 

      Mazlinda Moin (Universiti Malaysia PerlisSchool of Materials Engineering, 2008-05)
      Composites of thermoplastic blend of polypropylene (PP) filled with oil palm flour (OPF) was prepared by Z-Blade Mixer at 180 ºC and rotor speed 50 rpm. In general, increased of oil palm flour loading have increasing Young’s ...

    • Properties of pulp fiber filled high density Polyethylene 

      Azmel Hakim, Zainol Abidin (Universiti Malaysia PerlisSchool of Materials Engineering, 2008-04)
      In this study, attempt has been made to combine the advantages of fiber and polymer. Composites based on high density polyethylene (HDPE) and pulp fiber was made through melt blending and compression molding. HDPE/pulp ...

    • The protection coverage of external galvanic cell in series and parallel connection on a buried structure 

      Rubhakumaran, Ramachandran (Universiti Malaysia Perlis (UniMAP)School of Materials Engineering, 2016-05)
      Corrosion is an electrochemical process where surface of a material is being destroyed via its interaction with the environment. Buried structure like pipelines or undergroundtank experiences corrosion when the surface ...

    • Reactions between Iron Oxide and gangue minerals at 1273 K under Ar atmosphere 

      Nadia Syafiqah, Zainal Ariffin (Universiti Malaysia Perlis (UniMAP), 2017-06)
      CO2 discharged from iron and steelmaking companies is an example of the biggest issues for the protection of global environment and sustainable growth of steelmaking industry. One of the ideas to decrease CO2 emission and ...

    • Recovery of Copper (Cu) from printed circuit board (PCB) using LAKOS separator 

      Syed Aqil Syed Nadzir (Universiti Malaysia PerlisSchool of Materials Engineering, 2008-04)
      Printed Circuit Board (PCB) scrap has a metal content of nearly 28%, including an abundance of nonferrous metals such as copper, lead and tin. The purity of precious metals in PCBs is more than 10 times that of content-rich ...

    • Recovery of iron from sludge using solid phase materials 

      Mohd Qasmal Mohd Noor (Universiti Malaysia PerlisSchool of Materials Engineering, 2008-06)
      The application of metals extraction by polymer inclusion membrane (PIMs) was carried out by using solid phase materials. The ion carrier Cyanex 272 was incorporated into solid phase materials composed of cellulose ...

    • Recycled natural rubber toughened epoxy conductive materials 

      Lee, Lye Kee (Universiti Malaysia Perlis (UniMAP)School of Materials Engineering, 2016-06)
      Graphene based epoxy composite was prepared by using mechanical mixing and was tested with variety of testings and characterization. Firstly, the effect of graphene content on properties of epoxy/graphene composite was ...

    • Rheology behaviour of low density polyethylene / clay composites 

      Rokiah Rahamad (Universiti Malaysia PerlisSchool of Materials Engineering, 2008-05)
      Low density polyethylene (LDPE) composite are prepared by incorporating clay at different loading into LDPE matrix using a Z-Blade Mixer at temperature 1800C and a rotor speed of 50 rpm for 12 minutes. A compatibilizer, ...