Browsing School of Materials Engineering (FYP) by Title
Now showing items 131-150 of 256
-
Influence of temperature on reduction behaviour of iron ore-coal composite pellets
(Universiti Malaysia Perlis (UniMAP)School of Materials Engineering, 2016-06)This present study investigated about influence of temperature on reduction behaviour in iron ore and coal composite pellet. The objectives about this research were to analyse the reduction behaviour between iron ore and ... -
The influence of welding parameters and corrosive environment on the joint strength of resistance spot-welded mild steel sheets
(Universiti Malaysia PerlisSchool of Materials Engineering, 2008-04)In the present work, mild steel sheets consisting two batches were welded by resistance spot welding at different welding parameters and exposed under different environments. The 5% sodium chloride brine was used in the ... -
Influences of Phosphoric acid (H3PO4) solution on formation of Porous Anodic Aluminum Oxide (AAO) thin film
(Universiti Malaysia PerlisSchool of Materials Engineering, 2008-04)The main objective of this study is to analyze the effect of anodizing parameter focusing on anodizing voltage and phosphoric acid (H3PO4) concentration on the formation of porous anodic aluminum oxide (AAO) film. The ... -
Investigation of reaction temperature on the synthesis of graphene
(Universiti Malaysia Perlis (UniMAP)School of Materials Engineering, 2016-06)Graphene, two-dimensional sheet of carbon atoms has recently gained attention as some of its properties are promising for many applications. To bring graphene to the production level, synthesis methods are needed for its ... -
Investigation on thermal-mechanical degradation, rheological and mechanical properties of polypropylene-ethylene/silica composites
(Universiti Malaysia Perlis (UniMAP)School of Materials Engineering, 2016-06)The thermal-mechanical degradation resulting from heated two roll mill of silica filled polypropylene-ethylene (PPE) composites was investigated. The influence of processing temperature and silica loading was studied and ... -
Lattice Imperfections in Intermetallic Ti-Al alloys: an X-Ray Diffraction study of the microstructure by the Rietveld method
(Universiti Malaysia PerlisSchool of Materials Engineering, 2008-03)Microstructure in intermetallic Ti-Al alloys with compositions of Al= 45, 50, 55, and 60% in the homogenized bulk states has been extensively studied using Rietveld whole X-ray profile fitting technique, adopting the ... -
Lightweight material based on fly ash geopolymer
(Universiti Malaysia Perlis (UniMAP), 2016-05)The utilization of fly ash in geopolymer concrete as an alternative to Ordinary Portland Cement partial replacement of cement gaining immerse importance today, mainly account of improvement in long term durability of ... -
Magnetic properties of Perovskite Oxide, Nd₁-ₓCeₓCoO₃ with different percents of composition where X =0%, 0.25%, 0.50%, and 0.75%
(Universiti Malaysia Perlis (UniMAP)School of Materials Engineering, 2016-05)A Rare-earth cobalt oxide has been widely studied due their interesting electrical properties and magnetic. The mechanism of electrical conduction and insulation of the observed transition metals has been reported for ... -
Mango seed peel for zinc removal
(Universiti Malaysia Perlis (UniMAP)School of Materials Engineering, 2016-05)Zinc is a major element, which is discharged from many industries to the environment. A mango seed peel is the major waste produced from agricultural and processing industries. The purpose of this study is to investigate ... -
Mechanical and thermal performance of fly ash (FA) geopolymer
(Universiti Malaysia Perlis (UniMAP)School of Materials Engineering, 2016-05)This research is carried out to study the mechanical and thermal performance of fly ash geopolymer exposed to high temperature. Fly ash (FA) is the waste product that can be the raw material to make geopolymers. The fly ... -
Mechanical and thermal performance of lightweight geopolymers foamed using aluminium powder
(Universiti Malaysia Perlis (UniMAP), 2017-06) -
Mechanical properties of Copper Ferrite CuFe₂O₄‐ polymer composite fabricated using 3D printer
(Universiti Malaysia Perlis (UniMAP)School of Materials Engineering, 2016)The effect of speed of powder dispenser on the mechanical properties of ABS-CuFe₂O₄ composites was studied. The samples in the experiment were printed by 3D printer which produce three dimensional objects from the digital ... -
Mechanical properties of kenaf and calcium carbonate with unsaturated polyester composites
(Universiti Malaysia Perlis (UniMAP)School of Materials Engineering, 2016-06)Kenaf/unsaturated polyester composites were prepared with different kenaf fiber loading (1, 2 and 3 layer) and calcium carbonate loading (1 % and 2 %) by using hand lay – up method. The kenaf fiber used was in a fiber mat ... -
Mechanical properties of polyurethane composite foams filled with kenaf fiber and recycle tyre rubber
(Universiti Malaysia Perlis (UniMAP)School of Materials Engineering, 2015-05)This research is mainly focused on mechanical properties of polyurethane foam filled with kenaf fiber and tyre rubber particles with addition of different amount kenaf loading (2%, 4%, 6% and 8%) and size of tyre rubber ... -
Mechanical studie of chitosan filled recycled low density polyethylene biocomposites
(Universiti Malaysia Perlis (UniMAP)School of Materials Engineering, 2016-06)The chitosan filled recycled low density polyethylene (rLDPE) biocomposites were prepared by Z-blade mixer at the temperature 180 °C. The effects of chitosan loading on mechanical properties of the rLDPE/chitosan ... -
Mechanical study on concrete with different percentage of steel slag
(Universiti Malaysia Perlis (UniMAP)School of Materials Engineering, 2016-06)Concrete has its adaptability in its usage and play as an essential role in the field of construction. Steel slag gained from industry of steel manufacturing as by product. The use of these by-product to replace the portion ... -
Microstructure and mechanical propeties of new leadfree SAC and activated carbon composite solder
(Universiti Malaysia Perlis (UniMAP)School of Material Engineering, 2016-06)Recently, composite solder gain researcher attention in providing reinforcement candidate for lead solder. In this research, SAC and activated carbon synthesized to develop a new composite solder candidate. Four parameter ... -
Microstructure of development Al-Mg-Si-Cu powder metallurgy under different addition of Sn
(Universiti Malaysia PerlisSchool of Materials Engineering, 2008-04)This project involve 3 sample types that had labeled as Premix A (1%Sn addition), Premix B (1.5%Sn addition) and Premix C (2.0%Sn), each types have five samples. After compaction process measured the weight, thickness, ... -
Modified waste eggshell for the adsorption of Fe²⁺ from aqueous solution
(Universiti Malaysia Perlis (UniMAP)Scholl of Materials Engineering, 2016-06)In this research, modified waste eggshell was used as adsorbent for Fe (II) removal. Modified and adsorbed eggshell was characterized by Scanning Electron Microscopy (SEM), X-ray Fluorescence (XRF), and Brunauer, Emmet, ... -
Natural rubber toughened epoxy/graphene conductive materials
(Universiti Malaysia Perlis (UniMAP)School of Materials Engineering, 2016-06)In this research, graphene incorporated with epoxy composite was prepared using mechanical mixing technique with the density, flexural, fracture toughness, electrical conductivity, thermal stability and SEM morphology ...