Search
Now showing items 91-100 of 330
The design and analysis of two antennas for mobile phone
(Universiti Malaysia Malaysia, 2008-04)
In recent years, the demand for compact handheld communication devices has grown significantly. Devices having internal antennas have appeared to fill this need. Antenna size is a major factor that limits device miniaturization. ...
Simulation flux distribution and loss calculation of three phase transformer core 100kVA using FEM
(Universiti Malaysia Perlis, 2008-04)
This theses describes result of simulation flux distribution and loss calculation on
three phase transformer core 100kVA using FEM. From these theses, best material and best T-Joint configuration can be found. It’s important ...
Aging effect of Sn-Ag-Cu lead free solder
(Universiti Malaysia Perlis, 2008-03)
Many issue related to the performance of lead free solder alloys have arisen. So, it
should be take concern on it and one of the method is by studying the microstructure of
those solder alloys. This because their mechanical ...
Sintering behavior and microstructural characterization of Aluminium copper powder compacts (Al- 4.4 Cu-0.8 Si-0.5 Mg Wt% ) alloy prepared by powder metallurgy
(Universiti Malaysia Perlis, 2008-05)
Powder Metallurgy (P/M) is a near net shape metal forming techniques used to manufacture part to close tolerance. In this research, aluminium copper alloy (Al-4.4%Cu-
0.8% Si-0.5%Mg) is prepared by using P/M method. In ...
Design and fabrication of novel Articulated Robot Arm with mobile movement
(Universiti Malaysia Perlis, 2008-05)
This project had examined the Design and Fabrication of Novel Articulated Robot
Arm with Mobile Movement and Articulated Robot Arm that can perform for Pick and Place function. The project presents the processes undertaken ...
Process improvement towards the seeding process of Crystallization for refined sugar production in Chuping, Perlis
(Universiti Malaysia Perlis, 2008)
Sugar technology is an infinity improvement technology which it always needed improvement for future growth. That have a lot of inconsistent factors or noises influence its manufacturing process and the productivity of ...
Experimental design of Crystallization processes using classical method
(Universiti Malaysia Perlis, 2008-05)
Crystallization has become one of the most important unit operations in the sugar cane processing. The need to reduce the time from product discovery to market introduction is an inherent concern. In order to achieve the ...
Design and development Centrifugal Atomization machine for metal powder production – part 1
(Universiti Malaysia Perlis, 2008-05)
Atomization is one of the processes for making the powder metal for powder metallurgy process. Atomization actually is the process where the molten metal was disintegrated into small droplets and rapidly solidified before ...
Expressways electronic fares payment system by using RFID technology
(Universiti Malaysia Perlis, 2008-04)
This project is about to develop an expressways electronic fares payment system by using Radio Frequency Identification (RFID) application. The beneficial values for this project are to create an easy going payment system ...
A study case of dissimilar welding between mild steel ( Low Carbon Steel ) and stainless steel on hardness vickers and tensile shear test for gas tungsten arc welding ( GTAW )
(Universiti Malaysia Perlis, 2008-04)
This report is about the experimental study on the effects of the dissimilar weld joint design, edge preparation and joint dimension on the weldability of Gas Tungsten Arc Welding ( GTAW ) between mild steel and stainless ...