Search
Now showing items 71-80 of 330
Properties of oil palm flour filled Polypropylene composites
(Universiti Malaysia Perlis, 2008-05)
Composites of thermoplastic blend of polypropylene (PP) filled with oil palm flour (OPF) was prepared by Z-Blade Mixer at 180 ºC and rotor speed 50 rpm. In general, increased of oil palm flour loading have increasing Young’s ...
Study on mechanical characterization plastics waste as coarse aggregate (PWCA) for concrete
(Universiti Malaysia Perlis, 2008-05)
Quantities of plastics waste have been increased these recent years due to the boost
in industrialization and the rapid improvement in the standard of living. In Malaysia, most of plastics waste is abandoned and not ...
Properties of pulp fiber filled high density Polyethylene
(Universiti Malaysia Perlis, 2008-04)
In this study, attempt has been made to combine the advantages of fiber and polymer. Composites based on high density polyethylene (HDPE) and pulp fiber was made
through melt blending and compression molding. HDPE/pulp ...
Lighting control system using Photoresistor
(Universiti Malaysia Perlis, 2008-03)
Energy saving from the use of daylighting in commercial buildings is realized through
implementation of photoelectric lighting controls that turns on and off electric lights when sufficient daylight is available to provide ...
Simulation, fabrication and electrical characterization of p-Si capacitor design structure
(Universiti Malaysia Perlis, 2008-03)
Technology CAD (TCAD) refers to the use of computer simulation to model semiconductor processing and device operation. TCAD has two major functions which are process simulation and device simulation. It performs the ...
The influence of the accelerating voltages on the growth of the square structure during Electron Beam Induced Deposition (EBID) method
(Universiti Malaysia Perlis, 2008-04)
Electron beam induced deposition (EBID) is a method for high-resolution direct material deposition from the gas phase in the Scanning Electron Microscopy (SEM) onto
a substrate. In this project, EBID method has been used ...
Design and simulation of PZT Piezoelectric Microphone
(Universiti Malaysia Perlis, 2008-04)
Microphone is one of the most challenging and developing areas and markets in the field of micro sensor technology. Piezoelectric is one of sensing and actuation methods in Micro Electro Mechanical System or MEMS. This ...
Analysis of Binary Aluminium-Magnesium products with varying composition and optimum flowability, tensile strength and hardness
(Universiti Malaysia Perlis, 2008-04)
Casting is a process that can produce a complex and complicated component. This
final year project is to investigate how far the influence on mechanical properties and
microstructure of varying aluminium-magnesium alloy ...
Study on diffusivity of Gallium dopant in Silicon using Spin On Dopant (SOD) technique
(Universiti Malaysia Perlis, 2008-03)
Diffusion and ion implantation are two major processes by which chemical species or dopant are introduced into a semiconductor such as silicon to form the electronic
structure. The diffusion process is a method to control ...
Analysis & design low power multiplier using TSMC 0.18µm CMOS technology
(Universiti Malaysia Perlis, 2008-04)
As the advance of VLSI technology, low power design has become an important topic in
VLSI design. This project is to design a low power multiplier implemented in mentor
graphic tools. Low power multipliers are developed ...