Browsing School of Manufacturing Engineering (Articles) by Title
Now showing items 23-42 of 125
-
Design and analysis of magnetic flux leakage capsule
(International Frequency Sensor Association (IFSA), 2013-08)Magnetic flux leakage (MFL) is among the current in-line non-invasive popular technique applied in pipeline condition control and monitoring. This paper discussed on the design and development of magnetic flux leakage ... -
Design and anaysis of thermoacoustic air conditioning system as environmental friendly device
(Trans Tech Publications, 2012-02)Thermoacoustic air conditioning system is a new technology design of cooling system which offers the possibility for simple and efficient energy conversion devices. This research is looking an alternative for CFC-contained ... -
Design and fabrication of a die for molding test press.
(Praise Worthy Prize S.r.l., 2012)This project aims to design and fabricate an die for molding test press. Mold Test Press Machine uses the concept of Compression Molding/Hot Press Molding. This project will be handled from the beginning of the design until ... -
Design of fuzzy logic model for the prediction of tool performance during machining of composite materials
(Elsevier, 2012)Complexity of the machining process, the nonlinear relationship between parameters, and the random variations of material properties make the prediction of tool life during machining of composite material a challenge. ... -
Development of gas turbine spray test rig for biofuel
(Praise Worthy Prize S.r.l., 2011-01)The design of the fuel supply system to be used for biofuel is one of the systems that are complicated to design. As this system involves a lot of components, all the components in this design play an important role to ... -
Development of improved bottleneck-based heuristic for re-entrant flow shop with dominant machine at M1 and M4
(Praise Worthy Prize S.r.l., 2012-03)This project investigates the possibility of developing scheduling heuristic using bottleneck approach for a four machine permutation re-entrant flow shop with the process routing of M1,M2,M3,M4,M3,M4 where M1 and M4 have ... -
Development of palm oil based bio-product industrial wax and its application performance study
(David Publishing, 2010-06)Machining is a mechanical process where excess material from a work is removed to produce a product. At the moment different ferrous, non-ferrous materials and industrial blue wax have been used for prototype models. ... -
Effect of drill point angle on surface integrity when drilling titanium alloy
(Trans Tech Publications, 2014)Surface integrity of machined component is of major importance for the reliability and safety requirements during in service especially for the aerospace applications. This paper presents an investigation on the effect of ... -
Effect of heat treatment on microstructure and corrosion behavior of Az91d magnesium alloy
(Trans Tech Publications, 2013)An AZ91D ingot in the as-cast condition was homogenized by heat treatment process. Then, the microstructures produced and corrosion behaviour after heat treatment was studied in detail. As-cast AZ91D was recrystallize by ... -
The effect of inoculation on properties of modified ductile Ni-resist alloy
(Trans Tech Publications, 2014)In this study, ductile Ni-resist alloy with a minimum 18 wt. % nickel composition was modified. Up to 12 wt. % manganese was added together with 10 wt. % nickel before undergoing the inoculation process at various percentages ... -
Effect of mixing temperature on characteristics of thermoplastic potato starch film
(IOP Publishing Ltd, 2018-06)This study present the preparation of potato starch film with glycerol as a plasticizer through a solution casting technique. The effect of mixing temperature (80°C, 85°C, 90°C and 95°C) on the tensile and microstructure ... -
Effect of NaVO3 concentration on corrosion resistance of conversion coating on AZ91D magnesium alloy
(Trans Tech Publications, 2012)Anticorrosive oxide films were successfully prepared on AZ91D magnesium alloy by chemical conversion coating in La (NO3)3 electrolytes with and without NaVO3. The morphologies and chemical composition were characterized ... -
The effect of radial swirl generator on reducing emissions from bio-fuel burner system
(Canadian Center of Science and Education, 2009-06)A liquid bio-fuel burner system with various radial air swirlers attached to combustion chamber of 280 mm inside diameter and 1000 mm length has been investigated. All tests were conducted using crude palm oil as fuel. A ... -
The effect of shear rate and temperature on rheology properties of magnesium metal injection molding feedstock
(Praise Worthy Prize S.r.l., 2013-11)Metal injection molding (MIM) becomes a well-established and promising technology for small and mass production. Feedstock characterization is one of the most important roles in ensuring the properties of the MIM products. ... -
The effect of sintering duration on mechanical properties of Al/SiC composites
(Praise Worthy Prize S.r.l., 2013-11)Metal matrix composites (MMCs) have become attractive in a variety of applications due to its advantage of having intermediate properties between metal and ceramic. This paper presents the investigation of the effect of ... -
The effect of sintering temperature on mechanical properties of Al/SiC composites
(Praise Worthy Prize S.r.l., 2013)This paper presents the investigation of the effect of sintering temperature on mechanical properties of Al/SiC composites. The composites were produced via conventional powder metallurgy processing. The particle size of ... -
Effect of velocity variation at high swirl on axial flow development inside a can combustor
(Penerbit UTM Press, 2014)The main purpose of this paper is to study the internal flow effect of varying the inlet velocities inside a combustor. The flow field inside the combustor is controlled by the liner shape and size, wall side holes shape, ... -
Effects of backpack’s weight on school children – a review
(Universiti Malaysia Perlis (UniMAP), 2009-12-01)A review of literature was conducted to search what are the past studies approach and observation related to the effects of school backpack carrying on primary school children below 12 years old and solutions in reducing ... -
Ergonomic design of material handling tasks with buffer stock in production system for effective operations
(Universiti Malaysia Perlis (UniMAP), 2009-12-01)The use of ergonomics study is to improve the workers safety and health, increase job satisfaction and enhances performance. Lack of ergonomics criteria in workspace and workstation design can cause physical and biological ... -
Ergonomic exposure assessments of workplace layout and working postures of sitting and standing workers
(Universiti Malaysia Perlis (UniMAP), 2009-12-01)Ergonomics can be defined as the study of interface (an interaction) between the humans and the objects they used and the environments they function in. This definition seems to describe the most important components: ...