| dc.contributor.author | Mohd Ichwan, Nasution | |
| dc.contributor.author | Kamaruddin, Hussin | |
| dc.contributor.author | Shamsul Baharin, Jamaludin | |
| dc.contributor.author | Che Mohd Ruzaidi, Ghazali | |
| dc.contributor.author | Khairel Rafezi, Ahmad | |
| dc.contributor.author | Faizul, Che Pa | |
| dc.contributor.author | Chek Idrus, Omar | |
| dc.date.accessioned | 2017-11-21T00:57:25Z | |
| dc.date.available | 2017-11-21T00:57:25Z | |
| dc.date.issued | 2012 | |
| dc.identifier.citation | Journal of Engineering Research and Education, vol. 6, 2012, pages 81-84 | en_US |
| dc.identifier.issn | 1823-2981 | |
| dc.identifier.uri | http://dspace.unimap.edu.my:80/xmlui/handle/123456789/50494 | |
| dc.description | Link to publisher's homepage at http://jere.unimap.edu.my | en_US |
| dc.description.abstract | Material used for aluminium product usually made of aluminium scrap. Currently, the price of aluminium scrap is increase. It is necessary to minimize the cost of production by reducing the weight of the aluminium product at the same time remain the form or the shape of the product. Fabrication of aluminium matrix composite is one of the method to reduce the weight of aluminium but the modulus improved due the addition of ceramic materials as reinforcement. Acrylonitrine Butadiene Styrene (ABS) was selected because of its low density and low melting temperature. The results indicated that homogenous microstructure and better strengh can be obtained. | en_US |
| dc.language.iso | en | en_US |
| dc.publisher | Universiti Malaysia Perlis (UniMAP) | en_US |
| dc.subject | General metallurgy | en_US |
| dc.subject | Polymer | en_US |
| dc.subject | Foundry metallurgy | en_US |
| dc.title | Aluminium - Polymer abs product | en_US |
| dc.type | Article | en_US |
| dc.identifier.url | http://jere.unimap.edu.my | |
