Search
Now showing items 1-10 of 16
Compaction optimization of Sn-Cu-Si3N4via powder metallurgy route for composite solder fabrication
(Trans Tech Publications, 2013)
The aim of this study was to optimize the compaction process of a composite solder fabricated via powder metallurgy route, before details study were conducted in the next stage. Powder of Sn, Cu and Si3N4 were carefully ...
Study on the properties of oil palm trunk fiber (OPTF) in cement composite
(Trans Tech Publications, 2013)
Properties of oil palm trunk fiber reinforced cement composite were investigated in this study. Oil palm trunk fiber was used to improve the properties of cement composite. It was found that increasing in oil palm trunk ...
Characterization of porous aluminum fabricated via sintering- dissolution process (SDP)
(Trans Tech Publications, 2013)
Porous metals that have open pores structure with low density and light weight properties are suitable to be used in many engineering applications. In this work, the porous aluminum was fabricated via sintering dissolution ...
Study on physical and chemical properties of fly ash from different area in Malaysia
(Trans Tech Publications, 2013-12)
Fly ash is residue from the combustion of coal which widely available in worldwide and lead to waste management proposal. Moreover, the use of fly ash is more environmental friendly and save cost compared to OPC. Fly ash ...
Compressive strength and crack propagation of cement composites reinforced coconut fibre
(Medwell Journals, 2012)
This study presents the compressive strength and crack propagation of cement composites reinforced coconut fibre. The development of cement composites in this research were done by substituting coconut fibre to the portion ...
Mechanical properties and fracture behaviour of coconut fibre-based green composites
(Foundation for Materials Science and Engineering “Serban Solacolu”, 2012)
This paper presents the influence of natural fibre content on the mechanical properties of coconut fibre based-green composites. The mixture ratio of cement:sand by weight was fixed at 1:1. Coconut fibre was used as ...
Mechanical properties of ZTA composite using cold isostatic pressing and uniaxial pressing
(Trans Tech Publications, 2013)
Alumina-zirconia composite is an engineering material with a great potential to be develop for application as high temperature resistance structural material. In this research, zirconia toughness alumina (ZTA) was produced ...
Composite cement reinforced coconut fiber: physical and mechanical properties and fracture behavior
(INSInet Publications, 2011)
This research paper reports the effect of natural fiber content on the physical and mechanical properties as well as fracture behavior of composite cement reinforced with coconut fiber. The mix design was based on 1:1 for ...
Compressive strength of fly ash based geopolymer / glass fiber composite via filament winding
(Trans Tech Publications, 2014)
In general, filament winding technique is used to fabricate the composite pipes using continuous fiber and matrix resin. In this study, fly ash based geopolymer resin composites reinforced by continuous glass fiber were ...
Effect of space holder and compaction pressure on the porosity of sintered copper
(Trans Tech Publications, 2013)
The effect of space-holder content on the porosity of sintered copper that was fabricated by powder metallurgy technique has been investigated. Carbamide was used as space-holder and the content selected was 10 wt. %, 20 ...