Browsing Alida Abdullah, Ts. Dr. by Issue Date

Now showing items 1-20 of 25

    • Preliminary study on the physical properties of palm ash and PCB waste mixed with phenolic resin. 

      Mohd Radzi, Ali; Shamsul Baharin, Jamaludin, Prof. Dr.; Che Mohd. Ruzaidi, Ghazali, Prof. Madya; Nur Hidayah, Ahmad Zaidi; Alida, Abdullah (Universiti Malaysia PerlisSchool of Materials Engineering & School of Environmental Engineering, 2010-06-09)
      Brake pad is widely used in automotive industry and consists of various materials including asbestos which is harmful to the human and its production exceeds 10 or more ingredients. In this work, preliminary investigation ...

    • Development of coconut fiber with the addition of fly ash for cement panel application in construction 

      Alida, Abdullah; Shamsul Baharin, Jamaludin, Prof. Dr.; Mazlee, Mohd Noor (Universiti Malaysia Perlis (UniMAP)Centre for Graduate Studies, 2010-10-16)
      Natural fibers exist in large quantities and have been classified as waste materials. Coconut fiber is one of them and it is used as addition in fabrication of cement panel. Industrial waste materials such fly ash is ...

    • Composite cement reinforced coconut fiber: physical and mechanical properties and fracture behavior 

      Alida, Abdullah; Mazlee, Mohd Noor, Dr.; Shamsul, Baharin Jamaludin, Prof. Dr.; Kamarudin, Hussin, Brig. Jen. Dato' Prof. Dr. (INSInet Publications, 2011)
      This research paper reports the effect of natural fiber content on the physical and mechanical properties as well as fracture behavior of composite cement reinforced with coconut fiber. The mix design was based on 1:1 for ...

    • Assessment of physical and mechanical properties of cement panel influenced by treated and untreated coconut fiber addition 

      Shamsul, Baharin Jamaludin, Prof. Dr.; Mohamed Iylia, Anwar; Mazlee, Mohd Noor, Dr.; Kamarudin, Hussin, Brig. Jen. Dato' Prof. Dr.; Alida, Abdullah (Elsevier BV, 2011)
      This project was conducted to produce a cement panel with the addition of treated and untreated coconut fiber in cement panel. Coconut fiber was added to replace coarse aggregate (sand) in this cement panel. In this project, ...

    • Compressive strength and crack propagation of cement composites reinforced coconut fibre 

      Alida, Abdullah; Shamsul Baharin, Jamaludin, Prof. Dr.; Mazlee, Mohd Noor; Kamarudin, Hussin, Brig. Jen. Dato' Prof. Dr. (Medwell Journals, 2012)
      This study presents the compressive strength and crack propagation of cement composites reinforced coconut fibre. The development of cement composites in this research were done by substituting coconut fibre to the portion ...

    • Mechanical properties and fracture behaviour of coconut fibre-based green composites 

      Alida, Abdullah; Shamsul Baharin, Jamaludin, Prof. Dr.; Mazlee, Mohd Noor; Kamarudin, Hussin, Brig. Jen. Dato' Prof. Dr. (Foundation for Materials Science and Engineering “Serban Solacolu”, 2012)
      This paper presents the influence of natural fibre content on the mechanical properties of coconut fibre based-green composites. The mixture ratio of cement:sand by weight was fixed at 1:1. Coconut fibre was used as ...

    • Inovasi aset baru kecemerlangan pendidikan Melayu: inisiatif Universiti Malaysia Perlis (UniMAP) 

      Kamaruddin, Hussin, Kol, Prof, Dato' Dr,; Mohd Mustafa Al Bakri, Abdullah; Raja Shah Erman, Raja Ariffin; Alida, Abdullah (Universiti Malaysia Perlis (UniMAP), 2012-03-29)
      Kertas pembentangan ini dibuat bagi menerangkan mengenai inovasi aset baru kecemerlangan pendidikan melayu melalui inisiatif yang dilakukan oleh Universiti Malaysia Perlis (UniMAP). Inovasi memainkan peranan penting dalam ...

    • Compaction optimization of Sn-Cu-Si3N4via powder metallurgy route for composite solder fabrication 

      Muhamad Hafiz, Zan @ Hazizi; Mohd Arif Anuar, Mohd Salleh; Zainal Arifin, Ahmad, Prof.; Mohd Mustafa Al-Bakri, Abdullah; Alida, Abdullah; Kamarudin, Hussin, Brig. Jen. Dato' Prof. Dr. (Trans Tech Publications, 2013)
      The aim of this study was to optimize the compaction process of a composite solder fabricated via powder metallurgy route, before details study were conducted in the next stage. Powder of Sn, Cu and Si3N4 were carefully ...

    • Study on the properties of oil palm trunk fiber (OPTF) in cement composite 

      Alida, Abdullah; Mohd Mustafa Al-Bakri, Abdullah; Kamarudin, Hussin, Brig. Jen. Dato' Prof. Dr.; Che Mohd Ruzaidi, Ghazali, Prof. Madya; Mohd Arif Anuar, Mohd Salleh; Phang, Kam Sang; Muhammad Faheem, Mohd Tahir (Trans Tech Publications, 2013)
      Properties of oil palm trunk fiber reinforced cement composite were investigated in this study. Oil palm trunk fiber was used to improve the properties of cement composite. It was found that increasing in oil palm trunk ...

    • Characterization of porous aluminum fabricated via sintering- dissolution process (SDP) 

      Shamsul Baharin,  Jamaludin, Prof. Dr.; Nik Mohd Fikry, Mohd Rushdi; Alida, Abdullah; Kamarudin, Hussin, Brig. Jen. Dato' Prof. Dr. (Trans Tech Publications, 2013)
      Porous metals that have open pores structure with low density and light weight properties are suitable to be used in many engineering applications. In this work, the porous aluminum was fabricated via sintering dissolution ...

    • Mechanical properties of ZTA composite using cold isostatic pressing and uniaxial pressing 

      Mohd Mustafa Al-Bakri, Abdullah; Ahmad Fauzi, Mohd Noor, Prof. Dr; Kamarudin, Hussin, Brig. Jen. Dato' Prof. Dr.; Norazian, Mohamed Noor; Mohd Arif Anuar, Mohd Salleh; Alida, Abdullah (Trans Tech Publications, 2013)
      Alumina-zirconia composite is an engineering material with a great potential to be develop for application as high temperature resistance structural material. In this research, zirconia toughness alumina (ZTA) was produced ...

    • Effect of space holder and compaction pressure on the porosity of sintered copper 

      Shamsul Baharin, Jamaludin, Prof. Dr.; Chong, Xin Yi; Alida, Abdullah; Kamarudin, Hussin, Brig. Jen. Dato' Prof. Dr. (Trans Tech Publications, 2013)
      The effect of space-holder content on the porosity of sintered copper that was fabricated by powder metallurgy technique has been investigated. Carbamide was used as space-holder and the content selected was 10 wt. %, 20 ...

    • The effects of fly ash and polystyrene bead additions on compressive strength of foamed cement composites 

      Mazlee, Mohd Noor, Dr.; Key, Tan Pei; Shamsul Baharin,  Jamaludin, Prof. Dr.; Roshasmawi, Abdul Wahab; Nur Izzati, Muhd Nadzri; Alida, Abdullah (Trans Tech Publications, 2013)
      The effects of both additions of fly ash and polystyrene (PS) beads were studied on compressive strength of foamed cement composites. The increasing amount of fly ash addition up to 6 wt. % has been found to increase the ...

    • Development of pilot plant for novel geopolymer brick making machine 

      Che Mohd Ruzaidi, Ghazali, Assoc. Prof.; Kamarudin, Hussin, Brig. Jen. Dato' Prof. Dr.; Mohd Mustafa Al Bakri, Abdullah; Muhammad Faheem, Mohd Tahir; Shamsul, Baharin Jamaludin, Prof. Dr.; Mohammad Tamizi, Selimin; Muhd Izzat, Ahmad; Alida, Abdullah (American-Eurasian Network for Scientific Information, 2013)
      With rapid growing country's development and rose in construction activity, rising demand of building materials and increased construction wastes have encouraged the development of new building materials. Geopolymer based ...

    • Microstructure studies on the effect of the alkaline activators of fly ash-based geopolymer at elevated heat treatment temperature 

      Mohd Mustafa Al-Bakri, Abdullah; Omar A., Abdulkareem; Kamarudin, Hussin, Brig. Jen. Dato' Prof. Dr.; Khairul Nizar, Ismail, Assoc. Prof. Dr.; Rafiza, Abdul Razak; Zarina, Yahya; Alida, Abdullah (Trans Tech Publications, 2013)
      Fly ash-based geopolymers are new binding materials produced to replace the ordinary Portland cement (OPC) used in concrete. In this research, the effect of alkaline activators on the compressive strength and the microstructure ...

    • Study on Ferum (Fe) and Zinc (Zn) removal by using rice bran at Sungai Pelepah, Kota Tinggi, Johor 

      Aeslina, Abdul Kadir, Dr.; Alida, Abdullah; Lee, Kah Wai (AENSI Publisher All rights reserved., 2013-10)
      Water pollution due to heavy metals is currently occurring at Sungai Pelepah, Kota Tinggi. Adsorption method is one of the most low cost effective methods to overcome this pollution problem compared to the other available ...

    • Study on properties and morphology of kaolin based geopolymer coating on clay substrates 

      Che Mohd Ruzaidi, Ghazali, Prof. Madya; Mohd Mustafa Al Bakri, Abdullah; Mohamed, Bnhussain, Prof. Dr.; Siti Salwa, M.S.; Alida, Abdullah; Muhammad Faheem, Mohd Tahir; Azlin, S.S. (Trans Tech Publications, 2013-12)
      The application of geopolymer as a coating was not widely explored by other researchers and therefore the study of kaolin based geopolymer coating applied on different types of clay substrate (unsintered and sintered) was ...

    • Study on physical and chemical properties of fly ash from different area in Malaysia 

      Khairul Nizar, Ismail, Assoc. Prof. Dr.; Mohd Mustafa Al-Bakri, Abdullah; Rafiza, Abdul Razak; Kamarudin, Hussin, Brig. Jen. Dato' Prof. Dr.; Alida, Abdullah; Zarina, Yahya (Trans Tech Publications, 2013-12)
      Fly ash is residue from the combustion of coal which widely available in worldwide and lead to waste management proposal. Moreover, the use of fly ash is more environmental friendly and save cost compared to OPC. Fly ash ...

    • On the structure of shape memory alloys 

      Cristian Acitei, Dragos; Victor Sandu, Andrei; Mohd Mustafa Al Bakri, Abdullah; Petrica, Vizureanu; Alida, Abdullah (Trans Tech Publications, 2013-12)
      The paper presents the obtaining of shape memory alloys, base copper and a diffractometer and microscopic study on some samples. The study was made on CuZnAl samples, obtained by classic casting and educated. The shape ...

    • Compressive strength of fly ash based geopolymer / glass fiber composite via filament winding 

      Che Mohd Ruzaidi, Ghazali, Prof. Madya; Alida, Abdullah; Mohd Mustafa Al Bakri, Abdullah; Kamarudin, Hussin, Brig. Jen. Dato' Prof. Dr.; Anis Nadhirah, Ismail (Trans Tech Publications, 2014)
      In general, filament winding technique is used to fabricate the composite pipes using continuous fiber and matrix resin. In this study, fly ash based geopolymer resin composites reinforced by continuous glass fiber were ...