About Ts Dr. Alida Abdullah

Ts Dr. Alida Abdullah is currently a Senior Lecturer at Faculty of Mechanical Engineering Technology, Universiti Malaysia Perlis

She was formerly from School of Material Engineering

ORCID ID: https://orcid.org/0000-0002-8274-0365

Scopus Author ID: 54979598300

Email: Alida Abdullah


Research Interests

Material characterization

Construction Engineering

Materials Characteristics

Materials


Recent Submissions

  • The effects of various concentrations of NaOH on the inter-particle gelation of a fly ash geopolymer aggregate 

    Alida, Abdullah; Kamarudin, Hussin; Mohd Mustafa Al Bakri, Abdullah; Zarina, Yahya; Sochacki, Wojciech; Rafiza, Abd Razak; Błoch, Katarzyna; Hamzah, Fansuri (MDPI AG, 2021-02)
    Aggregates can be categorized into natural and artificial aggregates. Preserving natural resources is crucial to ensuring the constant supply of natural aggregates. In order to preserve these natural resources, the production ...
  • Development of pilot plant for novel geopolymer brick making machine 

    Che Mohd Ruzaidi, Ghazali, Assoc. Prof.; Kamarudin, Hussin, Brig. Jen. Dato' Prof. Dr.; Mohd Mustafa Al Bakri, Abdullah; Muhammad Faheem, Mohd Tahir; Shamsul, Baharin Jamaludin, Prof. Dr.; Mohammad Tamizi, Selimin; Muhd Izzat, Ahmad; Alida, Abdullah (American-Eurasian Network for Scientific Information, 2013)
    With rapid growing country's development and rose in construction activity, rising demand of building materials and increased construction wastes have encouraged the development of new building materials. Geopolymer based ...
  • Microstructure studies on the effect of the alkaline activators of fly ash-based geopolymer at elevated heat treatment temperature 

    Mohd Mustafa Al-Bakri, Abdullah; Omar A., Abdulkareem; Kamarudin, Hussin, Brig. Jen. Dato' Prof. Dr.; Khairul Nizar, Ismail, Assoc. Prof. Dr.; Rafiza, Abdul Razak; Zarina, Yahya; Alida, Abdullah (Trans Tech Publications, 2013)
    Fly ash-based geopolymers are new binding materials produced to replace the ordinary Portland cement (OPC) used in concrete. In this research, the effect of alkaline activators on the compressive strength and the microstructure ...
  • Composite cement reinforced coconut fiber: physical and mechanical properties and fracture behavior 

    Alida, Abdullah; Mazlee, Mohd Noor, Dr.; Shamsul, Baharin Jamaludin, Prof. Dr.; Kamarudin, Hussin, Brig. Jen. Dato' Prof. Dr. (INSInet Publications, 2011)
    This research paper reports the effect of natural fiber content on the physical and mechanical properties as well as fracture behavior of composite cement reinforced with coconut fiber. The mix design was based on 1:1 for ...
  • Assessment of physical and mechanical properties of cement panel influenced by treated and untreated coconut fiber addition 

    Shamsul, Baharin Jamaludin, Prof. Dr.; Mohamed Iylia, Anwar; Mazlee, Mohd Noor, Dr.; Kamarudin, Hussin, Brig. Jen. Dato' Prof. Dr.; Alida, Abdullah (Elsevier BV, 2011)
    This project was conducted to produce a cement panel with the addition of treated and untreated coconut fiber in cement panel. Coconut fiber was added to replace coarse aggregate (sand) in this cement panel. In this project, ...
  • Compressive strength of fly ash based geopolymer / glass fiber composite via filament winding 

    Che Mohd Ruzaidi, Ghazali, Prof. Madya; Alida, Abdullah; Mohd Mustafa Al Bakri, Abdullah; Kamarudin, Hussin, Brig. Jen. Dato' Prof. Dr.; Anis Nadhirah, Ismail (Trans Tech Publications, 2014)
    In general, filament winding technique is used to fabricate the composite pipes using continuous fiber and matrix resin. In this study, fly ash based geopolymer resin composites reinforced by continuous glass fiber were ...
  • Effect on strength and hardness of clay ceramic substrate after treatment using koalin based geopolymer glaze 

    Mohd Mustafa Al Bakri, Abdullah; Liyana, Jamaludin; Muhammad Faheem, Mohd Tahir; Kamarudin, Hussin, Brig. Jen. Dato' Prof. Dr.; Rafiza, Abdul Razak; Zarina, Yahya; Alida, Abdullah (Trans Tech Publications, 2014)
    Geopolymerization is an alternative for ceramic industry by using clay based material such as kaolin or calcined kaolin geopolymer. Geopolymer paste is initially produced by alkaline activation of calcined kaolin with NaOH ...
  • The effects of fly ash and polystyrene bead additions on compressive strength of foamed cement composites 

    Mazlee, Mohd Noor, Dr.; Key, Tan Pei; Shamsul Baharin,  Jamaludin, Prof. Dr.; Roshasmawi, Abdul Wahab; Nur Izzati, Muhd Nadzri; Alida, Abdullah (Trans Tech Publications, 2013)
    The effects of both additions of fly ash and polystyrene (PS) beads were studied on compressive strength of foamed cement composites. The increasing amount of fly ash addition up to 6 wt. % has been found to increase the ...
  • The need to intensify research efforts in the alternative to lead shot 

    Baba Gowon; Kahtan S., Mohammed, Dr.; Shamsul Baharin, Jamaludin, Prof. Dr.; Alida, Abdullah (Trans Tech Publications, 2014)
    The problem of lead poisoning resulting from the use of lead shot in hunting waterbirds and shooting sports has led to the partial ban, voluntary restriction and complete ban of lead shot in some countries. The ban resulted ...
  • Compressive strength and morphology of fly ash based geopolymer as artificial aggregate with different curing temperature 

    Alida, Abdullah; Mohd Mustafa Al Bakri, Abdullah; Kamarudin, Hussin, Brig. Jen. Dato' Prof. Dr.; Che Mohd Ruzaidi, Ghazali, Prof. Madya; Zarina, Yahya; Mohd Arif Anuar, Mohd Salleh; Nurhamidah, Zakaria; Muhammad Faheem, Mohd Tahir (Trans Tech Publications, 2014)
    This paper presented the compressive strength of geopolymer paste with different NaOH concentration and morphology analysis for sintered artificial aggregate. This artificial aggregate was produce based on mix design with ...
  • On the structure of shape memory alloys 

    Cristian Acitei, Dragos; Victor Sandu, Andrei; Mohd Mustafa Al Bakri, Abdullah; Petrica, Vizureanu; Alida, Abdullah (Trans Tech Publications, 2013-12)
    The paper presents the obtaining of shape memory alloys, base copper and a diffractometer and microscopic study on some samples. The study was made on CuZnAl samples, obtained by classic casting and educated. The shape ...
  • Effect of space holder and compaction pressure on the porosity of sintered copper 

    Shamsul Baharin, Jamaludin, Prof. Dr.; Chong, Xin Yi; Alida, Abdullah; Kamarudin, Hussin, Brig. Jen. Dato' Prof. Dr. (Trans Tech Publications, 2013)
    The effect of space-holder content on the porosity of sintered copper that was fabricated by powder metallurgy technique has been investigated. Carbamide was used as space-holder and the content selected was 10 wt. %, 20 ...
  • Characterization of porous aluminum fabricated via sintering- dissolution process (SDP) 

    Shamsul Baharin,  Jamaludin, Prof. Dr.; Nik Mohd Fikry, Mohd Rushdi; Alida, Abdullah; Kamarudin, Hussin, Brig. Jen. Dato' Prof. Dr. (Trans Tech Publications, 2013)
    Porous metals that have open pores structure with low density and light weight properties are suitable to be used in many engineering applications. In this work, the porous aluminum was fabricated via sintering dissolution ...
  • Study on properties and morphology of kaolin based geopolymer coating on clay substrates 

    Che Mohd Ruzaidi, Ghazali, Prof. Madya; Mohd Mustafa Al Bakri, Abdullah; Mohamed, Bnhussain, Prof. Dr.; Siti Salwa, M.S.; Alida, Abdullah; Muhammad Faheem, Mohd Tahir; Azlin, S.S. (Trans Tech Publications, 2013-12)
    The application of geopolymer as a coating was not widely explored by other researchers and therefore the study of kaolin based geopolymer coating applied on different types of clay substrate (unsintered and sintered) was ...
  • Study on physical and chemical properties of fly ash from different area in Malaysia 

    Khairul Nizar, Ismail, Assoc. Prof. Dr.; Mohd Mustafa Al-Bakri, Abdullah; Rafiza, Abdul Razak; Kamarudin, Hussin, Brig. Jen. Dato' Prof. Dr.; Alida, Abdullah; Zarina, Yahya (Trans Tech Publications, 2013-12)
    Fly ash is residue from the combustion of coal which widely available in worldwide and lead to waste management proposal. Moreover, the use of fly ash is more environmental friendly and save cost compared to OPC. Fly ash ...
  • Compaction optimization of Sn-Cu-Si3N4via powder metallurgy route for composite solder fabrication 

    Muhamad Hafiz, Zan @ Hazizi; Mohd Arif Anuar, Mohd Salleh; Zainal Arifin, Ahmad, Prof.; Mohd Mustafa Al-Bakri, Abdullah; Alida, Abdullah; Kamarudin, Hussin, Brig. Jen. Dato' Prof. Dr. (Trans Tech Publications, 2013)
    The aim of this study was to optimize the compaction process of a composite solder fabricated via powder metallurgy route, before details study were conducted in the next stage. Powder of Sn, Cu and Si3N4 were carefully ...
  • New processing method of kaolin-based geopolymer brick by using geopolymer brick machine 

    Muhammad Faheem, Mohd Tahir; Mohd Mustafa Al Bakri, Abdullah; Che Mohd Ruzaidi, Ghazali, Prof. Madya; Kamarudin, Hussin, Brig. Jen. Dato' Prof. Dr.; Mohd Izzat, Ahmad; Alida, Abdullah (Trans Tech Publications, 2014-01)
    With increased activity in construction, deficiency of building materials and construction waste improvements have encouraged the development of new building materials. Conventional construction bricks are usually made ...
  • Mechanical properties of ZTA composite using cold isostatic pressing and uniaxial pressing 

    Mohd Mustafa Al-Bakri, Abdullah; Ahmad Fauzi, Mohd Noor, Prof. Dr; Kamarudin, Hussin, Brig. Jen. Dato' Prof. Dr.; Norazian, Mohamed Noor; Mohd Arif Anuar, Mohd Salleh; Alida, Abdullah (Trans Tech Publications, 2013)
    Alumina-zirconia composite is an engineering material with a great potential to be develop for application as high temperature resistance structural material. In this research, zirconia toughness alumina (ZTA) was produced ...
  • Study on the properties of oil palm trunk fiber (OPTF) in cement composite 

    Alida, Abdullah; Mohd Mustafa Al-Bakri, Abdullah; Kamarudin, Hussin, Brig. Jen. Dato' Prof. Dr.; Che Mohd Ruzaidi, Ghazali, Prof. Madya; Mohd Arif Anuar, Mohd Salleh; Phang, Kam Sang; Muhammad Faheem, Mohd Tahir (Trans Tech Publications, 2013)
    Properties of oil palm trunk fiber reinforced cement composite were investigated in this study. Oil palm trunk fiber was used to improve the properties of cement composite. It was found that increasing in oil palm trunk ...
  • Study on Ferum (Fe) and Zinc (Zn) removal by using rice bran at Sungai Pelepah, Kota Tinggi, Johor 

    Aeslina, Abdul Kadir, Dr.; Alida, Abdullah; Lee, Kah Wai (AENSI Publisher All rights reserved., 2013-10)
    Water pollution due to heavy metals is currently occurring at Sungai Pelepah, Kota Tinggi. Adsorption method is one of the most low cost effective methods to overcome this pollution problem compared to the other available ...

View more