Now showing items 1-20 of 32

    • Characterization of LUSI mud volcano as geopolymer raw material 

      Mohd Mustafa Al Bakri, Abdullah; Rafiza, Abdul Razak; Djwantoro, Hardjito, Dr.; Kamarudin, Hussin, Brig. Jen. Dato' Prof. Dr.; Khairul Nizar, Ismail, Assoc. Prof. Dr. (Trans Tech Publications, 2012)
      The mud of mud volcano samples were collected from an eruption site named 'LUSI' (Lumpur "mud" -Sidoarjo), East Java, Indonesia for characterization. Analysis showed that, the major constituents of mud are SiO 2 and Al 2O ...
    • Characterization of LUSI mud volcano as geopolymer raw material: A review 

      Rafiza, Abdul Razak; Mohd Mustafa Al-Bakri, Abdullah; Kamarudin, Hussin, Brig. Jen. Dato' Prof. Dr.; Djwantoro, Hardjito, Dr. Ir.; Khairul Nizar, Ismail, Assoc. Prof. Dr. (Universiti Malaysia Perlis (UniMAP), 2012-06-18)
      This paper summarizes the current knowledge about the potential of LUSI mud volcano, East Java, Indonesia as a raw material in geopolymer. Previous experimental study shows that the LUSI mud has a good performance when 5% ...
    • Chemical and physical characterization of boiler ash from palm oil industry waste for geopolymer composite 

      Zarina, Yahya; Mohd Mustafa, Al Bakri Abdullah; Kamarudin, Hussin; Khairul Nizar, Ismail; Andrei Victor, Sandu; Petricǎ, Vizureanu; Rafiza, Abdul Razak (Syscom 18 SRL/ SC BIBLIOTECA CHIMIEI SA, 2013-12)
      The characterizations of boiler ash waste from waste of palm oil industry were performed. The boiler ash was obtained from the boiler in the palm oil processing factory. The chemical and physical characterization has been ...
    • Chemical reactions in the geopolymerisation process using fly ash-based geopolymer: A review 

      Mohd Mustafa Al Bakri, Abdullah; Kamarudin, Hussin; Mohammed Amjad, Hussain; Khairul Nizar, Ismail; Rafiza, Abdul Razak; Mohd Izzat, Ahmad (American-Eurasian Network for Scientific Information (AENSI Publisher), 2011-07)
      The development of our world, demanding the power supply which is produced by combustion of coal. Unfortunately, the million of tons of fly ash and related-products have been generated. To overcome these problems, fly ash ...
    • Comparison of geopolymer fly ash and ordinary Portland cement to the strength of concrete 

      Mohd Mustafa Al Bakri, Abdullah; Kamarudin, Hussin, Brig. Jen. Dato' Prof. Dr.; Mohamed, Bnhussain, Prof. Dr.; Khairul Nizar, Ismail, Assoc. Prof. Dr.; Rafiza, Abdul Razak; Zarina, Yahya (American Scientific Publishers, 2013-12)
      The aim of this study is to evaluate the effect of various fly ash: aggregate ratios by using fly ash (FA) based geopolymer compared to ordinary Portland cement (OPC) on the compressive strength of concrete. The different ...
    • Comparison of original and sintered LUSI mud from East Java, Indonesia as raw material for making a geopolymer 

      Rafiza, Abdul Razak; Mohd Mustafa Al Bakri, Abdullah; Kamarudin, Hussin, Brig. Jen. Dato' Prof. Dr.; Djwantoro, Hardjito, Dr.; Khairul Nizar, Ismail, Assoc. Prof. Dr. (American Scientific Publishers, 2013-01)
      This paper presents the characterization of LUSI mud from East Java, Indonesia, as a potential raw material for making a geopolymer. Two types of LUSI mud were analyzed, i.e., original LUSI mud and LUSI mud that had been ...
    • Correlation between Na 2SiO 3/NaOH ratio and fly ash/alkaline activator ratio to the strength of geopolymer 

      Mohd Mustafa Al Bakri, Abdullah; Kamarudin, Hussin, Brig. Jen. Dato' Prof. Dr.; Khairul Nizar, Ismail, Assoc. Prof. Dr.; Mohamed, Bnhussain, Prof. Dr.; Zarina, Yahya; Rafiza, Abdul Razak (Trans Tech Publications, 2012)
      Geopolymer requires an alkaline activator to induce it pozzolanic property and to accelerate the geopolymerisation process. The geopolymerisation process occurs due to the mixing of fly ash, sodium silicate and sodium ...
    • Design, processing and characterization of fly ash-based geopolymers for lightweight concrete application 

      Mohd Mustafa Al-Bakri, Abdullah; Kamarudin, Hussin, Brig. Jen. Dato' Prof. Dr.; Khairul Nizar, Ismail, Assoc. Prof. Dr.; Sandu, Andrei Victor; Mohamed, Bnhussain, Prof. Dr.; Zarina, Yahya; Rafiza, Abdul Razak (Institute for Scientific Information (ISI), 2013-04)
      The mix design of geopolymers plays important role in obtaining desirable compressive strength. Optimum mix design of geopolymers can be applied for application, such as lightweight concrete. In order to determine the ...
    • The effect of curing temperature on physical and chemical properties of geopolymers 

      Mohd Mustafa, Al Bakri Abdullah; Kamarudin, Hussin; Mohammed Amjad, Hussain; Khairul Nizar, Ismail; Zarina, Yahya; Rafiza, Abdul Razak (Elsevier BV, 2011)
      Fly ash-based geopolymers required heat to increase the geopolymerization process in order to obtain higher compressive strength. As such, geopolymer samples were prepared using different curing temperatures (room temperature, ...
    • Effect of palm slag filler size on the mechanical and wear properties of brake pad composites 

      Che Mohd Ruzaidi, Ghazali, Assoc. Prof.; Kamarudin, Hussin, Brig. Jen. Dato' Prof. Dr.; Shamsul Baharin, Jamaludin, Prof. Dr.; Mohd Mustafa Al Bakri, Abdullah; Rafiza, Abdul Razak (American Scientific Publishers, 2013-01)
      Particle size of filler and other material that involved in brake pad composites are expected to be able to strongly influence the wear properties and performance. Palm slag as a filler in brake pad was investigated in ...
    • The effect of various waste materials' contents on the attenuation level of anti-radiation shielding concrete 

      Ali Basheer, Azeez; Kahtan Sadiq, Muhammed, Dr.; Mohd Mustafa Al-Bakri, Abdullah; Kamarudin, Hussin, Brig. Jen. Dato' Prof. Dr.; Sandu, Andrei Victor; Rafiza, Abdul Razak (MDPI, Basel, Switzerland, 2013)
      Samples of concrete contain various waste materials, such as iron particulates, steel balls of used ball bearings and slags from steel industry were assessed for their anti-radiation attenuation coefficient properties. The ...
    • Effect on strength and hardness of clay ceramic substrate after treatment using koalin based geopolymer glaze 

      Mohd Mustafa Al Bakri, Abdullah; Liyana, Jamaludin; Muhammad Faheem, Mohd Tahir; Kamarudin, Hussin, Brig. Jen. Dato' Prof. Dr.; Rafiza, Abdul Razak; Zarina, Yahya; Alida, Abdullah (Trans Tech Publications, 2014)
      Geopolymerization is an alternative for ceramic industry by using clay based material such as kaolin or calcined kaolin geopolymer. Geopolymer paste is initially produced by alkaline activation of calcined kaolin with NaOH ...
    • Feasibility of producing wood fibre-reinforced geopolymer composites (WFRGC) 

      Mohd Mustafa Al Bakri, Abdullah; Mohd Izzat, Ahmad; Muhammad Faheem, Mohd Tahir; Kamarudin, Hussin, Brig. Jen. Dato' Prof. Dr.; Khairul Nizar, Ismail, Assoc. Prof. Dr.; Mohamed, Bnhussain, Prof. Dr.; Rafiza, Abdul Razak; Zarina, Yahya; Liyana, Jamaludin (Trans Tech Publications, 2013)
      Wood fibres have long been known as a fibre reinforcement for concrete. Due to its availability and low production cost, this natural fibre has been used in less developed country where conventional construction materials ...
    • Fly ash-based geopolymer lightweight concrete using foaming agent 

      Mohd Mustafa Al Bakri, Abdullah; Kamarudin, Hussin, Brig. Jen. Dato' Prof. Dr.; Mohamed, Bnhussain; Khairul Nizar, Ismail, Prof. Madya Dr.; Zarina, Yahya; Rafiza, Abdul Razak (MDPI, Basel, Switzerland., 2012-06)
      In this paper, we report the results of our investigation on the possibility of producing foam concrete by using a geopolymer system. Class C fly ash was mixed with an alkaline activator solution (a mixture of sodium ...
    • Influence of dolomite on the mechanical properties of boiler ash geopolymer paste 

      Zarina, Yahya; Kamarudin, Hussin, Brig. Jen. Dato' Prof. Dr.; Mohd Mustafa Al-Bakri, Abdullah; Khairul Nizar, Ismail, Assoc. Prof. Dr.; Rafiza, Abdul Razak (Trans Tech Publications, 2014)
      The waste material from palm oil industry has been increasing since Malaysia was the world largest exported of palm oil mill. The waste such as palm fibers, nut shells, palm kernel and empty fruit bunches are the solid ...
    • Malaysian Foxtail grass - A potential source of natural/agro fibre for polymer composite panel 

      Che Mohd Ruzaidi, Ghazali, Prof. Madya; Mohd Mustafa Al Bakri, Abdullah; Kamarudin, Hussin, Brig. Jen. Dato' Prof. Dr.; Norazian, Mohamed Noor; Rafiza, Abdul Razak; Zarina, Yahya (Trans Tech Publications, 2013)
      Foxtail grass, also known as 'rumput bulu' by the local people, is one of the fast growing grasses abundantly available all over Malaysia. A full grown Foxtail grass attains a height of about 0.5 - 1.5 meters. The fibres ...
    • Mechanical properties and wear behavior of brake pads produced from palm slag 

      Che Mohd Ruzaidi, Ghazali; Kamarudin, Hussin, Brig. Jen. Dato' Prof. Dr.; Shamsul Baharin, Jamaludin, Prof. Dr.; Mohd Mustafa Al Bakri, Abdullah; Rafiza, Abdul Razak (Trans Tech Publications, 2012)
      Brake pads are important safety devices in vehicles. An effort to avoid the use of asbestos in brake pads has led to the development of asbestos-free brake pads that incorporate various organic and inorganic fillers. Palm ...
    • Microstructure studies on the effect of the alkaline activators of fly ash-based geopolymer at elevated heat treatment temperature 

      Mohd Mustafa Al-Bakri, Abdullah; Omar A., Abdulkareem; Kamarudin, Hussin, Brig. Jen. Dato' Prof. Dr.; Khairul Nizar, Ismail, Assoc. Prof. Dr.; Rafiza, Abdul Razak; Zarina, Yahya; Alida, Abdullah (Trans Tech Publications, 2013)
      Fly ash-based geopolymers are new binding materials produced to replace the ordinary Portland cement (OPC) used in concrete. In this research, the effect of alkaline activators on the compressive strength and the microstructure ...
    • Microstructure study on optimization of high strength fly ash based geopolymer 

      Mohd Mustafa Al Bakri, Abdullah; Kamarudin, Hussin, Brig. Jen. Dato' Prof. Dr.; Mohamed, Bnhussain, Prof. Dr.; Khairul Nizar, Ismail, Assoc. Prof. Dr.; Rafiza, Abdul Razak; Zarina, Yahya (Trans Tech Publications, 2012)
      The compressive strength and microstructural characteristics of fly ash based geopolymer with alkaline activator solution were investigated. The sodium hydroxide and sodium silicate were mixed together to form an alkaline ...
    • Microstructure study on volcano ash geopolymer aggregate at different sintering temperature 

      Rafiza, Abdul Razak; Mohd Mustafa Al Bakri, Abdullah; Kamarudin, Hussin, Brig. Jen. Dato' Prof. Dr.; Khairul Nizar, Ismail, Assoc. Prof. Dr.; Djwantoro, Hardjito, Dr.; Wan Hamidon Wan Badaruzzaman, Ir. Dr.; Zarina, Yahya (Trans Tech Publications, 2014)
      Recent research shows that the by-product materials such as fly ash can be used as raw material in producing aggregates and lightweight aggregates. The usage of this material can improve the quality of the aggregates ...