Browsing School of Materials Engineering (Articles) by Author "sbaharin@unimap.edu.my"

Now showing items 1-20 of 29

    • A brief review of layered rock salt cathode materials for lithium ion batteries 

      Tan, Tze Qing; Soo, Soon Peng; Azmi, Rahmat, Prof.; Shamsul Baharin,  Jamaludin, Prof. Dr.; Rozana Aina, Maulat Osman, Dr. ; Zul Azhar, Zahid Jamal, Dato Prof. Dr.; Mohd Sobri, Idris, Dr. (Trans Tech Publications, 2013)
      Nowadays, many researchers have been studying on the layered rock salt-type structure as cathode materials for the lithium ion batteries. LiCoO2 is the most commonly used cathode material but Co is costly and toxic. Thus, ...

    • Characterization of Co-Cr-Mo (F-75) alloy produced by solid state sintering 

      Zuraidawani, Che Daud; Shamsul Baharin, Jamaludin, Prof. Dr.; Md. Fazlul, Bari, Dr. (Trans Tech Publications, Switzerland, 2011)
      This research was carried out to fabricate and characterize Co-Cr-Mo (F-75) alloy. The samples have been prepared via solid state sintering. The lab work comprises the mixing of F-75 alloy powder with 2 wt. % of binder. ...

    • Characterization of porous aluminum fabricated via sintering- dissolution process (SDP) 

      Shamsul Baharin,  Jamaludin, Prof. Dr.; Nik Mohd Fikry, Mohd Rushdi; Alida, Abdullah; Kamarudin, Hussin, Brig. Jen. Dato' Prof. Dr. (Trans Tech Publications, 2013)
      Porous metals that have open pores structure with low density and light weight properties are suitable to be used in many engineering applications. In this work, the porous aluminum was fabricated via sintering dissolution ...

    • Comparative study on thermal, compressive, and wear properties of palm slag brake pad composite with other fillers 

      Che Mohd Ruzaidi, Ghazali, Assoc. Prof.; Kamarudin, Hussin, Brig. Jen. Dato' Prof. Dr.; Shamsul, Baharin Jamaludin, Prof. Dr.; Mohd Mustafa Al Bakri, Abdullah (Trans Tech Publications, 2011)
      The attractive performance-to-cost ratio associated with the incorporation of waste material in composite formulations used to produce brake pads has stimulated the idea of exploring the possible incorporation of additional ...

    • Compressive and wear resistance of alumina reinforced fe-cr matrix composites 

      Saidatulakmar, Shamsuddin; Shamsul Baharin, Jamaludin, Prof. Dr.; Zuhailawati, Hussain; Zainal Arifin, Ahmad (Scientific.Net, 2012-12)
      Fe-Cr matrix composite reinforced with alumina with mean powder sizes of 13, 23, 24 and 64 μm was successfully obtained through powder metallurgy method. The powder mixture were blended at a rotating speed of 250 rpm for ...

    • The corrosion studies of powder metallurgy Co-Cr-Mo (F-75) alloy 

      Zuraidawani, Che Daud; Shamsul Baharin, Jamaludin, Prof. Dr.; Mohd Nazree, Derman, Dr.; Juyana, A Wahab          (AENSI Publisher All rights reserved, 2013-10)
      Co-Cr-Mo (F-75) alloy was investigated for biomedical application due to its mechanical properties and good corrosion resistance. This study has been focusing on the corrosion behavior of PM Co-Cr-Mo alloy. The Co-Cr-Mo ...

    • Development of dense hydroxyapatite-ni by modified electroless deposition technique. 

      Sri Asliza, Md Amin; Mohd Zaheruddin, Kasmuin; Azmi, Rahmat, Dr.; Shamsul Baharin, Jamaludin, Prof. Dr.; Khairel Rafezi, Ahmad, Dr. (Trans Tech Publications, 2014)
      Ni deposited on HA powder was prepared by electroless plating process without sensitization and activation treatment. The deposited powder obtained was characterized by energy dispersive spectroscopy (EDX) and x-ray ...

    • Effect of beta tricalcium phosphate (β-TCP) on properties of Mg-Zn composites 

      Siti Aisyah, Buyong; Shamsul Baharin, Jamaludin, Prof. Dr.; Rohaya, Abdul Malek (Trans Tech Publications, 2014)
      In this work, Mg and Zn powder were used to prepare the Mg-Zn/β-TCP composites with different β-TCP composition by using powder metallurgy technique. The composite were mixed using ball mill and compacted at 500 MPa. The ...

    • Effect of different nickel content on the mechanical properties of hydroxyapatite-ni composites from coated powders 

      Sri Asliza, Md Amin; Mohd Zaheruddin, Kasmuin; Azmi, Rahmat, Dr.; Shamsul Baharin, Jamaludin, Prof. Dr.; Khairel Rafezi, Ahmad, Dr. (Trans Tech Publications, 2014)
      HA-Ni composites were fabricated by uniaxial pressing from coated powders, in which HA particles were successfully coated with nickel precursor by the electroless deposition method. The compacted powders sintered at ...

    • Effect of sintering on the physical and mechanical properties of Co-Cr-Mo (F-75)/HAP composites 

      Nur Maizatul Shima, Adzali, Dr.; Shamsul Baharin, Jamaludin, Prof. Dr.; Mohd. Nazree, Derman, Dr. (Universiti Kebangsaan Malaysia, 2013-12)
      This paper reports on the effects of HAP addition and sintering temperature on the microstructure and properties of the F-75/HAP composites fabricated by powder metallurgy. Co-Cr-Mo (F-75) is used in orthopedics because ...

    • The effect of sintering on the properties of powder metallurgy (PM) F-75 alloy 

      Zuraidawani, Che Daud; Shamsul Baharin,  Jamaludin, Prof. Dr. (Trans Tech Publications, 2013)
      F-75 (Co-Cr-Mo) alloy are widely used in the production of medical implants because of their excellent strength properties, hardness and also one of the biocompatible materials that very suitable in human body environment. ...

    • Effect of space holder and compaction pressure on the porosity of sintered copper 

      Shamsul Baharin, Jamaludin, Prof. Dr.; Chong, Xin Yi; Alida, Abdullah; Kamarudin, Hussin, Brig. Jen. Dato' Prof. Dr. (Trans Tech Publications, 2013)
      The effect of space-holder content on the porosity of sintered copper that was fabricated by powder metallurgy technique has been investigated. Carbamide was used as space-holder and the content selected was 10 wt. %, 20 ...

    • Effect of spot welding current and cycles on the mechanical properties of welded galvanized steel sheets 

      Shamsul Baharin,  Jamaludin, Prof. Dr.; Mazlee, Mohd Noor, Dr.; Muhammad Rifki, Ismail; Khairel Rafezi, Ahmad, Dr.; Kamarudin, Hussin, Brig. Jen. Dato' Prof. Dr. (Trans Tech Publications, 2013)
      Studies on the effects of welding current and cycles were carried on the galvanized steel sheets using spot welding. The welding currents used were 3 kA, 5 kA 6 kA and the welding cycles were 4, 6 and 8. Tensile shear and ...

    • The effects of fly ash and polystyrene bead additions on compressive strength of foamed cement composites 

      Mazlee, Mohd Noor, Dr.; Key, Tan Pei; Shamsul Baharin,  Jamaludin, Prof. Dr.; Roshasmawi, Abdul Wahab; Nur Izzati, Muhd Nadzri; Alida, Abdullah (Trans Tech Publications, 2013)
      The effects of both additions of fly ash and polystyrene (PS) beads were studied on compressive strength of foamed cement composites. The increasing amount of fly ash addition up to 6 wt. % has been found to increase the ...

    • The effects of superheating treatment on distribution of eutectic silicon particles in A357-continuous stainless steel composite 

      Mazlee, Mohd Noor; Shamsul Baharin, Jamaludin, Prof. Dr. (Trans Tech Publications, 2013)
      In the present study, superheating treatment has been applied on A357 reinforced with 0.5 wt.% (Composite 1) and 1.0 wt.% (Composite 2) continuous stainless steel composite. In Composite 1, the microstructure displayed ...

    • Fabrication and characterization of porous F-75 for potential application in tissue engineering 

      Shamsul Baharin,  Jamaludin, Prof. Dr.; Tan, Wei Leng; Nur Hidayah, Ahmad Zaidi; Zuraidawani, Che Daud; Mazlee, Mohd Noor, Dr. (Trans Tech Publications, 2013)
      Porous F-75 (Co-Cr-Mo) was produced by powder metallurgy technique. F-75 powder was mixed with space holder and compacted using different pressures (300 MPa, 350 MPa, 400 MPa, 450 MPa). The green samples were sintered at ...

    • Fabrication and mechanical properties of composite palm ash mixed with phenolic resins 

      Mohd Radzi, Ali; Shamsul Baharin, Jamaludin, Prof. Dr.; Nur Hidayah, Ahmad Zaidi; Che Mohd Ruzaidi, Ghazali, Prof. Madya (International Network for Scientific Information Publication (INSI), 2011-11)
      Brake pad is one of the important engineering components in automobile and it is fabricated by combination of various materials. Asbestos is one of the components in brake pad that is harmful to the human. In this ...

    • Innovative Metal injection molding (MIM) method for producing CoCrMo alloy metallic prosthesis for orthopedic applications 

      Mohd Afian, Omar; Shamsul Baharin, Jamaludin, Prof. Dr.; Nurazilah, Mohd Zainon; Norazlan, Roslani; Mohd Nizam, Abd Jalil; Mohd Bakri, Mohd Hijazi; Ahmad Zahid, Omar; Noorsyakirah, Abdulah (Trans Tech Publications, 2014-01)
      Powder injection molding (PIM) is a powder metallurgy process currently used for the production of complicated and near net shape parts of high performance materials [. This technique basically combines the advantages of ...

    • Mechanical properties and wear behavior of brake pads produced from palm slag 

      Che Mohd Ruzaidi, Ghazali; Kamarudin, Hussin, Brig. Jen. Dato' Prof. Dr.; Shamsul Baharin, Jamaludin, Prof. Dr.; Mohd Mustafa Al Bakri, Abdullah; Rafiza, Abdul Razak (Trans Tech Publications, 2012)
      Brake pads are important safety devices in vehicles. An effort to avoid the use of asbestos in brake pads has led to the development of asbestos-free brake pads that incorporate various organic and inorganic fillers. Palm ...

    • Mechanical properties of dissimilar welds between stainless steel and mild steel 

      Shamsul Baharin,  Jamaludin, Prof. Dr.; Mazlee, Mohd Noor, Dr.; Shahzan Kamarul, A. Kadir; Khairel Rafezi, Ahmad, Dr. (Trans Tech Publications, 2013)
      Joining of stainless steel type 304 to mild steel was carried out using a gas tungsten arc welding (GTAW). Samples were welded using stainless steel welding electrode: (AWS: E308l-16) and mild steel welding electrode: (AWS: ...