Browsing School of Environmental Engineering (FYP) by Title
Now showing items 228-247 of 437
-
Mechanical behaviour of concrete made with coarse recycle concrete of aggregates
(Universiti Malaysia Perlis (UniMAP)School of Environmental Engineering, 2012-05)This research was attempt to use demolition waste replacement of coarse aggregate to produce concrete. An experiment was carry out to determine the strength of concrete with demolition waste aggregate to compare with the ... -
Mechanical properties of steel fiber reinforced concrete with recycled coarse aggregate
(Universiti Malaysia Perlis (UniMAP)School of Environmental Engineering, 2014-06)Steel is one of fibres used in fiber reinforced concrete technology. Steel fibres in concrete are help to improves flexural strength and crack resistance. . Today, there are critical shortages of natural resources in ... -
Mechanism of ozo dye degardation by ozonation
(Universiti Malaysia Perlis (UniMAP)School of Environmental Engineering, 2012-05)This study evaluates the efficiency of ozonation for dye removal, Chemical Oxygen Demand (COD) and Total Organic Carbon (TOC) reduction and identified operational parameters such as contact time, pH and concentration of ... -
Meteorological and geological considerations for ground sink heat pump application
(Universiti Malaysia Perlis (UniMAP)School of Environmental Engineering, 2012-05)In venture to introduce a technology where giving a security, environmental sustainability, and economic well-being of the nation, a buildings where present one of the best opportunities to economically reduce energy ... -
Modelling of PM10 concentration in industrialized area in Malaysia: A case study in Nilai & Shah Alam
(Universiti Malaysia Perlis (UniMAP)School of Environmental Engineering, 2010-04)In Malaysia, the predominant air pollutants are suspended particulate matter (SPM) and nitrogen dioxide (NO2). This research is on PM10 as they may trigger harm to human health as well as environment. Six distributions, ... -
Modified sand brick with partial cement replacement using rice husk ash (RHA)
(Universiti Malaysia Perlis (UniMAP)School of Environmental Engineering, 2014-06)The increasing demand of cement in construction industries makes many researchers find other alternatives to reduce the cost and uses of cement. The material that can be replaced by cement must a pozzolanic material as it ... -
Monitoring flood area at a river catchment
(Universiti Malaysia Perlis (UniMAP)School of Environmental Engineering, 2012-05)For the past 10 years, flood had happened in Perlis many times. The area that involves with flood are Kangar, Chuping, Arau and Padang Besar. The title of this study is monitoring flood potential area at a river catchment. ... -
Multi Criteria Decision Analysis Criteria (MCDA) to deal with landfill site selection
(Universiti Malaysia Perlis (UniMAP), 2014-06)The increase in population, tourism sector and rapid industrialization is a one factor of increase in solid waste in Malaysia. Perlis is one of the states experiencing increases in solid waste production to rate the increased ... -
Multi-stage ozonation and biological treatment for the removal of azo dye industrial effluent
(Universiti Malaysia Perlis (UniMAP)School of Environmental Engineering, 2010-04)The presence of dyes in various industrial effluents is a major problem due to their adverse effect to many forms of life. Wastewater containing dyes presents a serious environmental problem due to its high toxicity which ... -
Municipal solid waste management in Perlis: Status, problem and challenge
(Universiti Malaysia Perlis (UniMAP)School of Environmental Engineering, 2011-04)Current solid waste management was a major problem in most developing countries. Interview and questionnaires survey on SWM has been done to identify the current status, problems and challenges in Perlis. From the research ... -
Natural resource as carbon absorbent in industrial activities
(Universiti Malaysia Perlis (UniMAP)School of Environmental Engineering, 2011-05)Carbon dioxide (CO2) emissions have increased in recent years in the cities of developing countries, due to heavy traffic and low quality fuel. Concentrations in the atmosphere have exceeded the safe limits of 350 ppm since ... -
New brick: Integration between clay and paper sludge
(Universiti Malaysia Perlis (UniMAP)School of Environmental Engineering, 2010-04)Brick is one of the most widely used construction materials in the world. Many modifications and development have been made to place industrial waste such as paper sludge on building construction. Utilization of waste ... -
Nutrients and heavy metal removal from landfill leachate by sub-surface flow (SSF) constructed wetlands planted with Limnocharis flava and Scirpus atrovirens
(Universiti Malaysia Perlis (UniMAP)School of Environmental Engineering, 2011-03)Landfill leachate classified as problematic wastewaters and represents a dangerous source of pollution for the environment due to its fertilizing and toxic effects. Thus, leachate must be treated at the leachate treatment ... -
Nutrients and heavy metal removal from landfill leachate by sub-surface flow (SSF) constructed wetlands planted with Limnocharis Flava and Scirpus Atrovirens
(Universiti Malaysia Perlis (UniMAP)School of Environmental Engineering, 2011-03)Landfill leachate classified as problematic wastewaters and represents a dangerous source of pollution for the environment due to its fertilizing and toxic effects. Thus, leachate must be treated at the leachate treatment ... -
Nutrients removal from landfill leachate using free water surface and subsurface flow in constructed wetland
(Universiti Malaysia Perlis (UniMAP)School of Environmental Engineering, 2012-05)Leachate is one of the major problems in landfill since it contained high levels of organic and inorganic matters. As it was highly contaminated, leachate could not be discharged directly into the surface water bodies. ... -
Optimization of biogas as renewable energy from closed anaerobic digestion biomass for palm oil mill effluent at mesophilic temperature
(Universiti Malaysia Perlis (UniMAP)School of Environmental Engineering, 2010-04)Palm oil mill effluent (POME) is a highly polluting wastewater that pollutes the environment if discharged directly due to its high chemical oxygen demand (COD) and biochemical oxygen demand (BOD) concentration. In ... -
Optimization of Moringa Oleifera extraction method for water and wastewater treatment application
(Universiti Malaysia Perlis (UniMAP)School of Environmental Engineering, 2012-05)Coagulation of water involves the use of coagulating agents to bring the suspended matter in the water together for the next treatment process easier which are settling and the filtration process. A lot of previous studies ... -
Optimum mix ratio of concrete brick using rice husk ash
(Universiti Malaysia Perlis (UniMAP)School of Environmental Engineering, 2014-06)In the era of globalization, the demand for the use of construction materials is greatly increased when looking at the wide usage in construction and rising demand will pose a problem for some of the construction industry. ... -
Overstrength factor for low-rise RC building
(Universiti Malaysia Perlis (UniMAP)School of Environmental Engineering, 2012-05)This research focuses on the application of these sets of new design codes (Eurocode) in the form of spreadsheets from Microsoft Excel for the purpose of analyzing and designing of reinforced concrete elements, mainly beams ... -
O₃/H₂O₂ oxidation of reactive green 19 dye wastewater: performance and decolourization kinetics
(Universiti Malaysia Perlis (UniMAP)School of Environmental Engineering, 2015-06)Dye is a colorant which can be used to dye textile fibres, which means that it has an affinity to the material to which it is applied. Dyes are widely used in the textile industries due to favourable characteristics, ...