Now showing items 55-74 of 437

    • Calculation of axial loads on columns by tributary area method and finite element method 

      Tee, Chin Fang (Universiti Malaysia Perlis (UniMAP)School of Environmental Engineering, 2014-06)
      The basic concept for structural analysis is transfer the service loading to the support that nearby. Axial load are transfer from building structure to the column and at the end transfer to foundation. Base on this ...
    • Carbon accounting of campus dining 

      Mohamad Aminuddin, Ghazali (Universiti Malaysia Perlis (UniMAP)School of Environmental Engineering, 2015-06)
      Production of greenhouse effect gas is made up of six components such as gas carbon dioxide, methane, nitrous oxide, hydrofluorocarbons, perfluorocarbons, and sulfur hexafluoride. The greenhouse effect is related to the ...
    • Carbon dioxide absorption using amine solution 

      Oh, Siew Choo (Universiti Malaysia Perlis (UniMAP)School of Environmental Engineering, 2012-05)
      Carbon dioxide (CO2) which contributes to 80% of greenhouse gaseous can cause global warming. Moreover, CO2 emission may create environmental and public health issues if no further action taken to prevent or reduce it. ...
    • Carbonation of geopolymer concrete at different depth effect 

      Siti Noor Baizura, Sulaiman (Universiti Malaysia Perlis (UniMAP)School of Environmental Engineering, 2014-06)
      Since admixtures for cement are known to enhance the properties of cement and by implication expand the quality of cement.. The Ordinary Portland Cement used as a primary binder in the concrete. Application of concrete ...
    • Case study of facilities management for people with disabilities (OKU) in UniMAP main campus 

      Ahmad Mujahid, Yusof (Universiti Malaysia Perlis (UniMAP)School of Environmental Engineering, 2014-06)
      Nowadays, more and more disabled people are accepted to further their studies at higher learning education. In fact the government are trying to give effort to integrate disabled people into normal environment and efface ...
    • Case study of waste minimization for ethanol manufacturing industry 

      Pow, Pei Suang (Universiti Malaysia Perlis (UniMAP)School of Environmental Engineering, 2012-05)
      Waste minimization is one of the practices of waste management. This study was aimed to determine minimization options for the wastes generated from ethanol manufacturing industry. There are three types of wastes generated, ...
    • A case study on clinical waste management and disposal and value of incineration 

      Nur Azielynie, Annuar (Universiti Malaysia Perlis (UniMAP)School of Environmental Engineering, 2012-05)
      A case study that had involved analysis of clinical waste, separation according by month and survey had done at Hospital Tuanku Fauziah, health clinic (Kangar, Arau and Kuala Perlis), and private clinic (Klinik Faizah, ...
    • A case study on effect of construction activities to environment 

      Raihan, Mohd Zayadi (Universiti Malaysia Perlis (UniMAP)School of Environmental Engineering, 2010-05)
      Currently there are many developments especially in construction’s sectors where a lot of pollutants have been produced and resulted in the degradation of the environment and countries. This pollution phenomenon indirectly ...
    • Catalytic ozonation for sludge disintegration 

      Fatin Nuraini, Juhari (Universiti Malaysia Perlis (UniMAP), 2014-06)
      Processing and disposal of excess sludge is one of the most serious problem encountered in wastewater treatment in terms of environment, finance and technology. This project research studied the catalytic ozonation for ...
    • Catalytic pyrolysis of agricultural waste by waste eggs shell 

      Nurul Asmidar, Mahadi (Universiti Malaysia Perlis (UniMAP), 2014-06)
      Nowdays, Malaysia is the major producer of palm oil. Demanding for palm oil has increased from industry for the production of oil products. Palm shell is one of the products from the palm oil plantation that can give adverse ...
    • Characteristic of gross pollutants and evaluation of gross pollutant traps (GPTs) in Perlis 

      Gressi, Rigum (Universiti Malaysia Perlis (UniMAP)School of Environmental Engineering, 2011-04)
      Gross pollutant traps (GPTs) is a structural controlled device used as an early pretreatment for water especially in open channel. GPTs detained rubbish such as leaf, plastics, polystyrene, paper and sediment to reduce ...
    • Characteristic of light weight aggregate (Palm oil clinker) 

      Norazrin, Ramli (Universiti Malaysia Perlis (UniMAP)School of Environmental Engineering, 2010-04)
      Lightweight aggregate (LWA) is a lightweight inert material, such as foamed slag, vermiculite, clinker, and perlite. The palm oil clinker (POC) is one of the agricultural waste, produced in abundance has the potential to ...
    • Characteristic of particulate emission (PM10) at residential area 

      Nur Adilah, Elias (Universiti Malaysia Perlis (UniMAP)School of Environmental Engineering, 2012-05)
      The objective of this study is to monitor the particulate matter (PM 10) around selected residential area at six locations around Perlis. The particulate matter (PM10) was collected by using Tas Minivolume E- Sampler on ...
    • Characterization and geotechnical properties of coal ash mixtures modified polyvinyl alcohol 

      Lew, Ee Von (Universiti Malaysia Perlis (UniMAP)School of Environmental Engineering, 2014-05)
      Coal is used to generate electricity. This study is to reduce the disposal problems of coal ash having nowadays and focuses on some properties of coal ash mixtures modified polyvinyl alcohol (PVA) which are fly ash (FA) ...
    • Characterization and geotechnical properties of coal ash mixtures modified sodium lauryl sulphate 

      Hong, Puan Yee (Universiti Malaysia Perlis (UniMAP)School of Environmental Engineering, 2014-06)
      Most of coal-burning power plant produced residue by-products after burning process such as fly ash and bottom ash with approximate production ratio of 90% fly ash and 20% bottom ash. Previously most of the coal burning ...
    • Characterization and properties of HDPE/NBR/PPF composite with/without ᵞ - APS coupilng agent 

      Nabila Najwa, Norizan (Universiti Malaysia Perlis (UniMAP)School of Environmental Engineering, 2015-06)
      The effect of γ-Aminopropyltriethoxy Silane (APS) as coupling agent on the properties of High Density Polyethylene (HDPE)/ Acrylonitrile-Butadiene Rubber (NBR)/ Palm Pressed Fibre (PPF) composite were studied. The High ...
    • Characterization and properties of HDPE/NBR/RHP composites with NAOH treatment 

      Yean, Pan Yu (Universiti Malaysia Perlis (UniMAP)School of Environmental Engineering, 2015-06)
      The increasing of rice husk production has become an issue when open burning is strictly banned due to environmental reasons. Besides, poor interfacial adhesion between natural reinforcing fillers and polymer matrix is ...
    • Characterization and properties of low linear density polyethylene (LLDPE)/ acrylonitrile butadiene rubber (NBR)/ palm press fiber (PPF) composite with and without ϒ-APS coupling agent 

      Nur Athirah, Zakaria (Universiti Malaysia Perlis (UniMAP)School of Environmental Engineering, 2015-06)
      The abundant of fibrous palm press fibre (PPF) agriculture by-product can create major environmental probles when simply left on the plantation fields. About 10% of this fibrous waste material are utilize as boiler ...
    • Characterization and properties of polypropylene (PP) / acrylonitrile butadiene rubber (NBR) / palm kernel shell (PKS) composites with PPMAH compatibilizer 

      Siti Noraishah, Zulbakri (Universiti Malaysia Perlis (UniMAP)School of Environmental Engineering, 2015-06)
      The effects of polypropylene maleic anhydride (PPMAH) as a compatibilizer on the properties of polypropylene (PP) / Acrylonitrile Butadiene Rubber (NBR) and Palm Kernel Shell (PKS) has been studied. Six different composites ...
    • Characterization and properties of PP/NBR/EFB composites with PPMAH compatibilizer 

      Khalid Mohamed, Abdillahi (Universiti Malaysia Perlis (UniMAP)School of Environmental Engineering, 2015-06)
      The Empty fruit bunch (EFB) has become the solid waste problem in Malaysia’s agricultural sector abundantly. Besides, poor interfacial adhesion between natural reinforcing filler and polymer mater is the most vital issue ...