Now showing items 43-62 of 437

    • Bacteria isolation and bioremedation of heavy metal in sediment of coastal area 

      Arina Azmina, Ahmad Zubir (Universiti Malaysia Perlis (UniMAP)School of Environmental Engineering, 2015-06)
      Coastal area sediments are normally contaminated with heavy metals resulted from the anthropogenic activities that occurs daily such as boat and ferries activities. The types of heavy metals that are identified in the ...
    • Behavior of axially distributed loaded sand brickwall palm oil clinker 

      Muhammad Alffi Fairroz, Wahab (Universiti Malaysia Perlis (UniMAP)School of Environmental Engineering, 2014-06)
      This project is about the research of behavior distributed axial load on the sand Palm Oil Clinker (POC) brick wall. In this study, POC bricks were self-made in the laboratory. There are three samples of the bricks ...
    • The behavior of concrete containing mango seed 

      Nurol Hafizah, Zainal Abidin (Universiti Malaysia Perlis (UniMAP)School of Environmental Engineering, 2013-06)
      Mango seed was used as partial replacement of sand. The replacement is done so that cost in construction reduced. Preparation of the raw material which is mango seed is easy. The mango seed is collected and let to dry. ...
    • Behavior of concrete with saw dust at fresh and hardened states 

      Noor Adlina, Md Daud (Universiti Malaysia Perlis (UniMAP)School of Environmental Engineering, 2013-06)
      Nowadays technology in concrete has been developing in many ways to enhance the quality and properties of concrete. For this project, saw dust is used in the making of concrete. This project is carried out to study the ...
    • Behavior of concrete with saw dust in different curing method 

      Faridatul Anis, Zainuddin (Universiti Malaysia Perlis (UniMAP)School of Environmental Engineering, 2013-06)
      This proposal is intended to study the behavior of concrete with saw dust with different curing method like water tank, plastic, box and wet gunny. The proportioned mixture uses are cement, sand, aggregate, water and saw ...
    • The behavior of rubber tyre as fine aggregate in concrete mix 

      Siti Aza Nurdiana, Tajri (Universiti Malaysia Perlis (UniMAP)School of Environmental Engineering, 2014)
      Rubber tyres are the most waste material that can be found nowadays. Rubber tyre is the resilient materials that was used by people and make it as the waste tyre disposal after the tyre was not function anymore. Therefore, ...
    • Behavioral study of concrete composite with mixture of fly ash and concrete sludge aggregate 

      Mohd Shakirim, Harith (Universiti Malaysia Perlis (UniMAP)School of Environmental Engineering, 2013-06)
      Nowadays, the high demand of cement and aggregate are an indication of development especially for the construction industry. Thus, the alternative to replace partial replacement of cement and aggregate are by using the ...
    • Behavioral study of steel transmission tower toward wind loading using STAAD.Pro V8i 

      Show, Bor Jlunn (Universiti Malaysia Perlis (UniMAP)School of Environmental Engineering, 2012-05)
      With today’s developments of power transmission systems, a huge number of structural steel towers to support in the connection of power cables are being constructed in Malaysia. However, wind is one of the most important ...
    • The behaviour of construction waste as coarse aggregates 

      Norhayati, Hasim (Universiti Malaysia Perlis (UniMAP)School of Environmental Engineering, 2012-05)
      This research is one of the positive methods by recycling construction waste material as the replacement to coarse aggregate in concrete mixture. The purpose of this study is to determine the performance of crushed ...
    • The behaviour of masonry wall constituted by hollow blocks: strength correlation 

      Mohamad Amru, Mustafa (Universiti Malaysia Perlis (UniMAP)School of Environmental Engineering, 2012-05)
      This paper focuses on the development of the compressive strength correlation between the individual block, prism and basic wall panel for load bearing interlocking hollow mortarless blocks. The interlocking blocks used ...
    • Biodegration of biodiesel 

      Noor Anis Azziana, Zulkiple (Universiti Malaysia Perlis (UniMAP)School of Environmental Engineering, 2015-06)
      Local bacteria isolated from oil-contaminated soils from several locations in Perlis were screened for their ability to degrade commercial biodiesel fuel. The enrichment of bacteria culture from the soil samples yielded ...
    • Biosorption removal of Methylene Blue dye from aqueous solution using modified sugarcane bagasse 

      Clara, Wong Xiang Xiang (Universiti Malaysia Perlis (UniMAP)School of Environmental Engineering, 2010-04)
      This research was on the activated carbon produced from sugarcane bagasse, existing wide as waste in Malaysia and other countries producing sugar, for dye removal. Two different activated carbons (AC1 and AC2) were synthesized ...
    • Calculation of axial loads on columns by tributary area method and finite element method 

      Tee, Chin Fang (Universiti Malaysia Perlis (UniMAP)School of Environmental Engineering, 2014-06)
      The basic concept for structural analysis is transfer the service loading to the support that nearby. Axial load are transfer from building structure to the column and at the end transfer to foundation. Base on this ...
    • Carbon accounting of campus dining 

      Mohamad Aminuddin, Ghazali (Universiti Malaysia Perlis (UniMAP)School of Environmental Engineering, 2015-06)
      Production of greenhouse effect gas is made up of six components such as gas carbon dioxide, methane, nitrous oxide, hydrofluorocarbons, perfluorocarbons, and sulfur hexafluoride. The greenhouse effect is related to the ...
    • Carbon dioxide absorption using amine solution 

      Oh, Siew Choo (Universiti Malaysia Perlis (UniMAP)School of Environmental Engineering, 2012-05)
      Carbon dioxide (CO2) which contributes to 80% of greenhouse gaseous can cause global warming. Moreover, CO2 emission may create environmental and public health issues if no further action taken to prevent or reduce it. ...
    • Carbonation of geopolymer concrete at different depth effect 

      Siti Noor Baizura, Sulaiman (Universiti Malaysia Perlis (UniMAP)School of Environmental Engineering, 2014-06)
      Since admixtures for cement are known to enhance the properties of cement and by implication expand the quality of cement.. The Ordinary Portland Cement used as a primary binder in the concrete. Application of concrete ...
    • Case study of facilities management for people with disabilities (OKU) in UniMAP main campus 

      Ahmad Mujahid, Yusof (Universiti Malaysia Perlis (UniMAP)School of Environmental Engineering, 2014-06)
      Nowadays, more and more disabled people are accepted to further their studies at higher learning education. In fact the government are trying to give effort to integrate disabled people into normal environment and efface ...
    • Case study of waste minimization for ethanol manufacturing industry 

      Pow, Pei Suang (Universiti Malaysia Perlis (UniMAP)School of Environmental Engineering, 2012-05)
      Waste minimization is one of the practices of waste management. This study was aimed to determine minimization options for the wastes generated from ethanol manufacturing industry. There are three types of wastes generated, ...
    • A case study on clinical waste management and disposal and value of incineration 

      Nur Azielynie, Annuar (Universiti Malaysia Perlis (UniMAP)School of Environmental Engineering, 2012-05)
      A case study that had involved analysis of clinical waste, separation according by month and survey had done at Hospital Tuanku Fauziah, health clinic (Kangar, Arau and Kuala Perlis), and private clinic (Klinik Faizah, ...
    • A case study on effect of construction activities to environment 

      Raihan, Mohd Zayadi (Universiti Malaysia Perlis (UniMAP)School of Environmental Engineering, 2010-05)
      Currently there are many developments especially in construction’s sectors where a lot of pollutants have been produced and resulted in the degradation of the environment and countries. This pollution phenomenon indirectly ...