Browsing Researchers by Title
Now showing items 1331-1350 of 3514
-
F-Oligosac: a Biofunctional Prebiotic from Recombinant Aspergillus Niger Fermentation of Sago Starch
(C. I. S. Network, 2005)It has become tremendously obvious that current trend of industries, to get engaged in manufacturing biologic based commodities simultaneously making high profit. -
Fabrication and characterisation of powder metallurgy Fe-Cr Matrix composites reinforced with Al2O3
(Trans Tech Publications, 2013)Sintered powder metallurgy Fe based composites with advanced mechanical properties have been proposed as substitutes for more expensive cemented carbide and wrought alloys in many applications, especially as inexpensive ... -
Fabrication and characterization of 50 nm silicon nano-gap structures
(American Scientific Publishers, 2011-04)A simple method for the fabrication of nano-gaps less than 50 nm by using conventional photolithography combined with patterned-size reduction techniques is presented. Silicon material is used to fabricate the nano-gap ... -
Fabrication and characterization of a-Si micro and nano-gap structure for electrochemical sensor
(American Institute of Physics, 2010-12-01)The development and application of micro gap for electrochemical sensors and biomolecule detection are reviewed in this article. The preparation methods for micro- and nano-gaps and their properties are discussed along ... -
Fabrication and characterization of gold nano-gaps for ssDNA immobilization and hybridization detection
(Journal of New Materials for Electrochemical Systems, 2011)We develop a method for fabricating the nano-gaps directly by using just photolithography and wet etching processes without any nano lithography or difficult techniques. It shows that this resolution enhancement allows one ... -
Fabrication and characterization of IDE based sensor through conventional lithography method
(Trans Tech Publications, 2014)This paper mainly illustrate regarding the fabrication process of IDE based sensor for bio-molecular detection process. Material that is utilized in this process is zinc oxide due to bio-compability and elevated electrical ... -
Fabrication and characterization of porous F-75 for potential application in tissue engineering
(Trans Tech Publications, 2013)Porous F-75 (Co-Cr-Mo) was produced by powder metallurgy technique. F-75 powder was mixed with space holder and compacted using different pressures (300 MPa, 350 MPa, 400 MPa, 450 MPa). The green samples were sintered at ... -
Fabrication and characterization of Si quantum dots and SiO2 tunnel barriers grown by a controlled oxidation process
(IOP Publishing Ltd, 2008-01-29)The control of the growth of silicon dioxide (SiO2) and the formation of quantum dots (QDs) play an important role in the fabrication of single-electron transistors (SETs). In this work, SET structures were fabricated using ... -
Fabrication and characterization of ZnO thin films by sol-gel spin coating method for the determination of phosphate buffer saline concentration
(Bentham Science Publishers., 2013)The fabrication, characterization and application of nanostructured zinc oxide (ZnO) thin films on interdigitated silver electrodes were described for the determination of phosphate buffer saline (PBS) concentration. The ... -
Fabrication and investigation of copper rotor bar on 0.5HP induction Motor-A performance and economical study
(Australian Journal of Basic and Applied Sciences, 2011-05)The paper deals with the fabrication of copper rotor bars for 0.5HP induction motor and then comparing it with the existing aluminium rotor bars. From this experiment the rotors are compared in terms of efficiency increment ... -
Fabrication and mechanical properties of composite palm ash mixed with phenolic resins
(International Network for Scientific Information Publication (INSI), 2011-11)Brake pad is one of the important engineering components in automobile and it is fabricated by combination of various materials. Asbestos is one of the components in brake pad that is harmful to the human. In this ... -
Fabrication and properties of Aluminium reinforced calcined dolomite and ferrosilicon by powder metallurgy route
(Universiti Malaysia PerlisSchool of Materials Engineering, 2007) -
Fabrication of 3C-silicon carbide membranes: Towards development of novel microdevices for biomedical applications
(Institute of Electrical and Electronics Engineers (IEEE), 2012-02-27)3C-SiC is currently under intense study as a potential material for implantable low power blood pressure sensing due to its biocompatibility. In this work, we present and discuss the fabrication processes for n-type 3C-SiC ... -
Fabrication of a Hand-held Electronic Nose
(Universiti Malaysia Perlis, 2007)An electronic nose is a device that performs the electronic olfactory to substitute human experts. The development of these devices is growing faster due to higher demand. However, current electronic noses usually are very ... -
Fabrication of Amorphous silicon Microgap Structure for Energy Saving Devices
(Universiti Kebangsaan Malaysia, 2011-11-18)We report here the fabrication of microgaps electrodes on amorphous silicon using low cost techniques such as vacuum deposition and conventional lithography. Amorphous silicon is a low cost material and has desirable ... -
Fabrication of amorphous silicon microgap structure for energy saving devices
(Sains Malaysiana., 2012-06)We report here the fabrication of microgaps electrodes on amorphous silicon using low cost techniques such as vacuum deposition and conventional lithography. Amorphous silicon is a low cost material and has desirable ... -
The fabrication of artificial marble from dolomite (Batu Reput)
(The Mineral, Metals & Materials Society (TMS), 2006-01)Perlis is one of the major producers of "Batu Reput" in Malaysia and majority of the deposits contain of high-purity calcium and magnesium carbonate. The composition of Batu Reput is similar with the ordinary dolomite. ... -
Fabrication of BaTiO3 thin films through ink-jet printing of TiO2 sol and soluble Ba salts
(Elsevier Ltd., 2007)BaTiO3 thin films were prepared by ink-jet printing aqueous solutions of TiO2 sol and soluble Ba salts. Higher pH values (pH > 13) as well as higher than stoichiometric Ba (Ba:Ti = 1.1:1) salt additions were required to ... -
Fabrication of calcium phosphate coating on pure magnesium substrate via simple chemical conversion coating: surface properties and corrosion performance evaluations
(Elsevier, 2018)The main objective of the current work was to fabricate calcium phosphate (CaP) coating on 99.9% purity magnesium, Mg substrate through simple chemical conversion method and evaluated the surface properties and corrosion ... -
A fabrication of intelligent spiral reconfigurable beam forming antenna for 2.35 2.39GHz applications and path loss measurements
(EMW Publishing, 2013)A reconfigurable beam forming antenna prototype using a spiral feed line is proposed in this paper. The presented antenna is integrated with PIN diode switches at a specific location of spiral feed line. It is discovered ...