Browsing Researchers by Title

Now showing items 1836-1855 of 3514

    • J-integral analysis of surface cracks in round bars under bending moments 

      A.E., Ismail; Ahmad Kamal, Ariffin; Shahrum, Abdullah; Mariyam Jameelah, Ghazali; Ruslizam, Daud, Dr. (Trans Tech Publications, 2011-04)

    • J-integral analysis of surface cracks in round bars under combined loadings 

      A. Emran, Ismail; Ahmad Kamal, Ariffin; Shahrum, Abdullah; Mariyam Jameelah, Ghazali; Ruslizam, Daud, Dr. (Trans Tech Publications, 2011-02)
      This paper presents a non-linear numerical investigation of surface cracks in round bars under combined bending and torsion loadings by using ANSYS finite element analysis (FEA). Due to the non-symmetrical analysis, a full ...

    • J-integral analysis of surface cracks in round bars under tension loadings 

      A. Emran, Ismail; Ahmad Kamal, Ariffin; Shahrum, Abdullah; Mariyam Jameelah, Ghazali; Ruslizam, Daud, Dr.; M. Abdul, Razzaq; A., Zulkifli (Trans Tech Publications, 2011-04)
      This paper presents a non-linear numerical investigation of surface cracks in round bars under tension stresses by using ANSYS finite element analysis (FEA). Due to the symmetrical analysis, only quarter finite element ...

    • J-integral evaluation in two dimensional interacting cracks 

      Ruslizam, Daud; Ahmad Kamal, Ariffin; Shahrum, Abdullah; A. Emran, Ismail (Trans Tech Publications, 2011)
      This paper investigates crack interaction of multiple edge cracks in elastic solid finite body under pure Mode I loading. The cracks are located in parallel to another in 2D plate model. The stress intensity factors (SIFs) ...

    • J-integral evaluation in two dimensional interacting cracks 

      Ruslizam, Daud; Ahmad Kamal, Ariffin; Shahrum, Abdullah; A. Emran, Ismail (International Association of Computer Science and Information Technology (IACSIT), 2011-03-25)
      This paper investigates crack interaction of multiple edge cracks in elastic solid finite body under pure Mode I loading. The cracks are located in parallel to another in 2D plate model. The stress intensity factors (SIFs) ...

    • Japanese face emotions classification using lip features 

      Mohamad Rizon, Mohamed Juhari; Muthukaruppan, Karthigayan; Sazali, Yaacob; Nagarajan, R. (Institute of Electrical and Electronics Engineering (IEEE), 2007)
      In this paper, lip features are applied to classify the human emotion using a set of irregular ellipse fitting equations using Genetic algorithm. As Japanese, is considered in this study. All six universally accepted ...

    • Jaundice assessement of newborn baby: A short review on Kramel’s Rule and magnetic induction spectroscopy 

      Maliki, Ibrahim; Zulkarnay, Zakaria; Jurimah, Abd Jalil; Shazwani, Sarkawi; Balkhis, Ibrahim; Mohamad Aliff, Abd Rahim; Nazahah, Mustafa; Mohd Hafiz Fazalul, Rahiman; Abdul Ruzairi, Abdul Rahim (Penerbit UTM Press, 2015-04)
      Jaundice is a yellow discolouration of white eyes (sclera), skin and mucous membrane which is clinically apparent when the level of serum bilirubin rises up to 5 mg/dl. Jaundice could cause abnormalities in the newborn ...

    • Jaundice in newborn monitoring using color detection method 

      Muhammad Naufal, Mansor; Sazali, Yaacob, Prof. Dr.; Hariharan, Muthusamy, Dr.; Shafriza Nisha, Basah, Dr.; Syahryull Hi-Fi Syam, Ahmad Jamil; Mohd Lutfi, Mohd Khidir; Muhammad Nazri, Rejab; Ku Mohd Yusri, Ku Ibrahim; Addzrull Hi-Fi Syam, Ahmad Jamil; Ahmad Kadri, Junoh (Elsevier B.V., 2012-03-10)
      Jaundice is a yellow discoloration of the skin and/or whites of the eyes that is often seen in newborn infants. The discoloration is caused by a yellow substance called bilirubin. Infants with high blood levels of bilirubin, ...

    • Joining of dissimilar 6063 aluminium alloy-316L stainless steel by spot welding: tensile shear strength and heat treatment 

      Nur Farhana, Hayazi; Mazlee, Mohd Noor, Dr.; Shaiful Rizam, Shamsudin; Nur Farhana, Hayazi; Tan, Alvin Yin Zhen (Trans Tech Publications, 2013)
      Tensile shear strength and ageing treatment of dissimilar 6063 aluminum alloy-316L stainless steel joint fabricated by spot welding were investigated. The results showed that tensile shear strength increased with the ...

    • Journal Impact Factor 

      Mohamad Nazri, Abdul Halif (Universiti Malaysia Perlis (UniMAP)Pejabat Timbalan Naib Canselor (Penyelidikan dan Inovasi), 2007-01)

    • K-factor due to implementing of DC unbalanced/balanced of a transformer 

      Syafruddin, Hasan; Ismail, Daut, Prof. Dr.; Soib, Taib, Assoc. Prof. Dr. (Institute of Electrical and Electronics Engineers (IEEE), 2007-12-04)
      This paper presents the effects of harmonic distortion on loaded single phase two winding transformer.The impact on K-factor is studied by implementing DC unbalanced and balanced configurations. The measurements are done ...

    • Kaedah dan teknik meningkatkan kreativiti sebagai pemimpin berkesan 

      Kamarudin Hussin, Lt. Kol. Prof. Dato' Dr.; Norsyahiza Hamzah; Azizi Mohd Yusof (Kolej Universiti Kejuruteraan Utara Malaysia, 2004-09)

    • Kajian keberkesanan promosi Universiti Malysia Perlis tahun 2007 

      Mohd Mustafa Al Bakri, Abdullah; Kamarudin, Hussin, Prof. Dato' Dr.; Julinawati, Suanda; Che Mohd. Ruzaidi, Prof Madya; Abdul Aziz, Mahmudin (Universiti Malaysia Perlis (UniMAP)Jabatan Hal Ehwal Pelajar & Alumni (JHEPA), 2008-08)

    • Kaolin Geopolymer as precursor to ceramic formation 

      Nur Ain, Jaya; Mohd Mustafa Al Bakri, Abdullah; Che Mohd Ruzaidi, Ghazali; Mohammed, Hussain; Kamarudin, Hussin; Romisuhani, Ahmad (EDP Sciences, 2016)
      This paper introduced the potential application of kaolin geopolymer as ceramic precursor. This is one of the alternatives to produce high strength ceramic at a slightly lower temperature. Upon sintering the conversion of ...

    • Kaolin-based geopolymers with various NaOH concentrations 

      Heah, Cheng Yong; Kamarudin, Hussin, Brig. Jen. Dato' Prof. Dr.; Mohd Mustafa Al-Bakri, Abdullah; Mohamed, Bnhussain, Prof. Dr.; Luqman, Musa, Dr.; Khairul Nizar, Ismail, Assoc. Prof. Dr.; Che Mohd Ruzaidi, Ghazali, Prof. Madya; Liew, Yun Ming (Springer Verlag, 2013-03)
      Kaolin geopolymers were produced by the alkali-activation of kaolin with an activator solution (a mixture of NaOH and sodium silicate solutions). The NaOH solution was prepared at a concentration of 6-14 mol/L and was mixed ...

    • Kayan 1: a Particle Board from Rice Husk 

      Suhardy, Daud; Shamsul Baharin, Jamaludin, Prof. Dr.; Che Mohd Ruzaidi, Mohd Ghazali, Prof. Madya; Mohd Nazry, Salleh; Farizul Hafiz, Kassim; Saiful Azhar, Saad; Tengku Nadzlan, Tengku Ibrahim; Wan Su, Haron; Mohamed Zulkali, Mohamed Daud, Prof. Madya Dr. (Malaysian Invention and Design Society (MINDS), 2007-05-18)
      In this study, the particle board (kayan 1) was made from rice husk. The rice husk was blended with Urea-Formaldehyde (UF) as a binder and Ammonium Chloride (NH4C1) as a hardener before compaction using hot press.

    • Kejohanan Badminton Jemputan UniMAP 2009 

      Mohd Mustafa Al-Bakri, Abdullah (Universiti Malaysia Perlis, 2009-12)

    • Kejohanan Bola Tampar Terbuka UiTM Arau 

      Mohd Mustafa Al Bakri, Abdullah (Kolej Universiti Kejuruteraan Utara Malaysia, 2005-04)

    • Kejohanan Olahraga Terbuka POAPs 

      Mohd Mustafa Al-Bakri, Abdullah (Universiti Malaysia Perlis, 2009-12)

    • Kejohanan Olahraga Tertutup UniMAP 2008 

      Mohd Mustafa Al Bakri, Abdullah (Universiti Malaysia Perlis, 2008-03)